Re:3D Gigabot Manual de usuario

think big,

print huge

quick start guide

quick start guide 3

Table of Contents

a Receiving and uncrating 5

b bed level & z home 11

c Loading ﬁlament 19

d SOFTWARE 23

e Setup 23

f preparing a print 26

g printing on gigabot 29

Congratulations on your Gigabot®purchase. we

can’t wait to see you print huge!

Helpful links

Welcome

This guide will help get your Gigabot® set up and ready to print. Should you have any questions,

please reach out to [email protected].

Here are some additional links to help you along the way:

Stay updated on re:3D activities! We regularly post content on the following accounts:

New users are included in our monthly newsletter, but anyone can also sign up at bottom of our main

page at https://re3d.org/

Wiki: http://wiki.re3d.org

Facebook: https://www.facebook.com/re3Dprinting/

Community forum: https://re3d.zendesk.com/hc/en-us/community/topics

Twitter: https://twitter.com/re_3D

Instagram: https://www.instagram.com/re3dprinting/

re:3D shop: http://shop.re3d.org/

Website: https://re3d.org/

Sketchfab: https://sketchfab.com/re3d/models

YouTube: https://www.youtube.com/user/GigaBot3D

Rev.03 December 2016

Receiving and

uncrating

gigabot®: unassembled 6

If you received a fully assembled Gigabot®, follow steps A1 through A5. If you received a

Gigabot® kit, follow steps A6 through A7. Follow steps A8 through A11 regardless of your

Gigabot® type.

For fully assembled Gigabots, need two 9/16" wrenches or socket wrenches to remove the

braces securing the Gigabot® to the base of its crate. You will also need a Phillips head

screwdriver to remove the panels of the crate.

Upon delivery of the Gigabot®, whether it is fully assembled or a kit, inspect all packages for

damage prior to signing for the delivery. If there is any damage, record it and report to our

shipping manager within 24 hours at [email protected].

For a video demonstration of these steps, feel free to watch our video on this process on our

YouTube channel at https://www.youtube.com/user/GigaBot3D/.

The Gigabot runs on 120V as a standard unless you speciﬁed when purchasing that it would

be preferable to use 220V. In the case that you ordered a 220V machine you will have to

acquire your own plug. The standard 120v version comes with a universal power cord.

overview

Upon arrival, check the

Tip n' Tell and Shockwatch

indicators. Check the

crate for damage. If any

damage is observed, or

the indicators are tripped,

record and report to

[email protected] within

24 hours.

Remove the lid and all

the panels, as well as

the plastic wrap covering

Gigabot®.

Remove all zip ties, foam

blocks, bubble wrap, etc.

from Gigabot®.

quick start guide 7

Remove all 4 wooden

corner braces by using 2

9/16" wrenches.

Remove all 8 bed locks

using the 8mm wrench.

Note that these are both

above AND below the

bed frame.

For kit customers only:

Check all boxes for

damages before signing

o on the delivery. Record

and report any damages to

[email protected] within

24 hours of receiving your

shipment.

quick start guide

Kit customers only:

Complete the assembly of

the Gigabot® according to

the assembly instructions.

Insert the female end of

the cord into the electrical

box. Check that the

connection is secure.

Plug in the male end of

the cord into an outlet.

quick start guide 9

a10

If you are looking at the

front of your Gigabot (you

should see the Gigabot

nameplate) the power

switch is located on the

right side of your bot

closer to the front. It is a

small black circle switch;

ﬂip it on!

quick start guide

Tabla de contenidos

Otros manuales de Impresora 3D de re:3D