Racelogic Performance Box Touch V1 Manual de usuario
03 Screen Layout – Performance Box Touch V1
As the name suggests, you can control the Performance Box Touch by using its capacitive touch screen.
Generally, the top of the screen contains indicative status information, the centre of the screen contains mode/
settings information which can be navigated by pressing the fwd/back buttons or by swiping the screen left/right, and
the bottom of the screen contains function buttons.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
1
LEDs
The Performance Box Touch has 4 LEDs above the display. These can flash in different colour and different frequency
patterns depending on the process being performed. You can learn more about the LED behaviour on the Performance
Box Touch here.
Logging Status
The red Record Icon will show when the unit is logging
data to the SD card.
If the icon appears white when you have initiated
logging, the unit is primed for logging and is in the
process of synchronising the internal real-time clock
(RTC) to GPS time. The logging will not start until
this synchronisation process is complete.
IMPORTANT –
The SD card shouldn't be removed when the Record Icon is on as you may lose data.
SD Status
The SD Card Icon displays the status of the recording
media. When an SD card has been inserted and has
free space, it will display as green. Tapping on the icon
when green will manually start or stop logging
data, overriding the Configured Logging Strategy.
When no SD card is detected or the media is full, the
icon will display as red.
Satellite Status
The Satellite Icon displays whether the unit has a valid
satellite lock.
When a lock is acquired, it will display as solid green.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
2
When there is no satellite lock, the icon will flash red.
Display Mode
This header shows which Display Mode is currently selected.
Battery Status
The Battery status icon is there to keep you informed of the charge currently available in the battery when you are
using the battery with the Performance Box Touch. You can read more about the battery status here.
Mode Data
This area will contain information in relation to the currently selected Display Mode.
Settings Button
The Settings Button will open a Settings area which
contains Display Mode,General and Diagnostic
Settings.
The options presented first within the Settings screen
are dependent on the mode selected, information on
these can be found within each specific mode area.
Screenshot Button
Selecting the Screenshot Button will save a full image
of what is shown on screen to the inserted SD card. If
the screenshot has been saved successfully, the LEDs
will illuminate yellow in sequence from left to right to
display the progress of writing to the SD card. When
screen capture is complete, Performance Box Touch
will emit an audible confirmation notification. If the
screenshot has been saved unsuccessfully, for example,
no SD card is inserted or the card is full, the SD
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
3
Card Icon at the top of the screen will flash 3 times
and Performance Box Touch will emit an audible
error notification.
The capture will be saved as a 1.5 MB bitmap image,
orientated at 90° to the original screen image, with the
prefix 'screenshot'.
IMPORTANT –
NEVER remove the SD card when a screenshot is
being taken, it could cause the unit to crash!
Results Button
A history of the test results can be viewed by
selecting the Results Button at the bottom of
the Primary Accel Screen.
Test results will display until a new test type is chosen or
the Reset Button is pressed.
Mode Button
The Mode Button allows you to choose between the 4
Display Modes available.
Reset Button
Depending on which screen you are on, the Reset
Button will reset mode results and/or history. When
pressed, the LEDs will briefly flash green twice and the
unit will emit an audible confirmation notification. If
selected within the Lap Timing Mode, a cancel timeout
screen will display, allowing you to cancel the reset
within 5 seconds by pressing the screen.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
4
Fwd/Back Buttons
The
Forward and Back arrow buttons
can be used to navigate through the
Display Mode and Settings screens.
Alternatively, you can swipe left or
right on the screen when these are
visible.
Exit Button
The Exit button can be used to return to the previous
menu or page.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
5
Otros manuales para Performance Box Touch V1
5
Tabla de contenidos
Otros manuales de Registrador de datos de Racelogic
Racelogic
Racelogic Performance Box Touch V1 Manual de usuario
Racelogic
Racelogic VBOX Touch Motorsport V2 Manual de usuario
Racelogic
Racelogic VBOX Touch v2 Manual de usuario
Racelogic
Racelogic VBOX 3i Manual de usuario
Racelogic
Racelogic VBTOUCH-V1 Manual de usuario
Racelogic
Racelogic VBOX LapTimer Manual de usuario
Racelogic
Racelogic Performance Box Touch V2 Manual de instrucciones
Racelogic
Racelogic VBOX 3i Manual de usuario
Racelogic
Racelogic VBOX HD Lite Manual de usuario
Racelogic
Racelogic VBOX Micro Manual de usuario
Racelogic
Racelogic VBOX Touch Manual de usuario
Racelogic
Racelogic VBOX3i Manual de usuario
Racelogic
Racelogic VBOX Touch Manual de usuario
Racelogic
Racelogic Performance Box Touch V1 Manual de instrucciones
Racelogic
Racelogic VBOX Touch V2 Manual de usuario
Racelogic
Racelogic VBOX IISX Manual de usuario
Racelogic
Racelogic VBOX II Manual de usuario
Racelogic
Racelogic VBOX 3iV2 Manual de usuario
Racelogic
Racelogic VBOX Mini Manual de usuario
Racelogic
Racelogic VBOX Micro Manual de usuario
