Racelogic VBOX Touch Manual de usuario

VBOX Touch Lap Timing Mode - Quick Start Guide

VBOX Touch features a 10 Hz GNSS receiver and a responsive colour touchscreen. The Lap Timing Mode allows you

to view live Lap Timing information in relation to a set Start/Finish line.

Two Lap Timing screens are available; the Main Screen, which contains live reference lap speed comparison (Delta-V),

live reference lap time comparison (Delta-T), current reference lap time, last lap time, last lap time difference to best,

session time and completed lap count. The Basic Screen contains either just a rolling lap time or a static previous lap

time.

Registration

So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to

offer technical support, please register your VBOX Touch.

What’s Included

VBOX Touch (RLVBTOUCH)

Product Code Quantity Description

VBTOUCH-V1 1VBOX Touch 10 Hz Unit Including

Rubber Cover

RLCAB010LE / RLCAB014LE 1

Cigar Plug Power Supply

(RLVBTOUCH, 2 m)

or Unterminated Power Supply

(RLVBTOUCH-M, 2 m)

RLACS313 18 GB SD Ultima Pro UHS-1 Memory

Card

RLACS262 1 GNSS Antenna (3 m)

RLACS277 1 Swivel Neck Richter Suction Mount

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Product Code Quantity Description

RLACS281 1

Plastic Carry Case for VBOX Touch

(not supplied with RLVBTOUCH-

VBOX Touch RTK (RLVBTOUCHR)

Product Code Quantity Description

VBTOUCHR-V1 1VBOX Touch RTK 10 Hz Unit

Including Rubber Cover

RLCAB010LE 1Cigar Plug Power Supply

(RLVBTOUCH, 2 m)

RLACS313 18 GB SD Ultima Pro UHS-1 Memory

Card

RLACS308 1 GNSS Antenna (3 m)

RLACS277 1 Swivel Neck Richter Suction Mount

RLACS281 1 Plastic Carry Case for VBOX Touch

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Accessories

Product Code Description

RLVBACS004 Brake Pedal Trigger

RLVBACS010 Hand Held Start/Stop Logging Switch

RLCAB001 VBOX PC Serial Cable

Hardware Overview

Left Side

SD Card

VBOX Touch logs data via an SD card. Dependent on the Logging Strategy selected within the General

Settings area, the unit will either log continuously or when movement is detected (default). More information on this is

available here.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Right Side

Antenna

VBOX Touch has an internal patch antenna, meaning that in many circumstances where the unit has a clear view of the

sky without any interference, an additional antenna is not required. However, if you are struggling to maintain a stable

satellite lock, the supplied external antenna (RLACS262) can be connected to the antenna socket. The external antenna

should also be used when conducting a Brake Trigger Test. More information on the external antenna is available

here.

D IN/PPS

The Digital In and PPS port can be used for connection to the VBOX Brake Pedal Trigger to provide brake trigger

deceleration tests. More information on this is available here.

The port can also be used to connect a Hand Held Start/Stop Logging Switch (RLVBACS010) to control the logging of

the unit. More information on this is available here.

CAN/Serial (Top)

The top CAN/Serial port can be used to output serial information, allowing you to either connect VBOX Touch to VBOX

Test Suite via an RLCAB001 and conduct live testing, or output lap timing parameters. Serial Output settings

information is available here.

CAN/Serial (Bottom)

The bottom CAN/Serial port can be used by VBOX Touch RTK units to receive RTK corrections via an NTRIP Modem

or a Telemetry Radio Module with a Static Base Station. RTK input settings information is available here.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Power

The VBOX Touch unit is either powered by the supplied RLCAB010LE cable (RLVBTOUCH) which is inserted in to a

vehicle's 12 V cigar power socket, or by the RLCAB014LE cable (RLVBTOUCH-M) which is unterminated for making a

bare wire connection to a power supply. More information on this is available here.

Logging

VBOX Touch logs data via an SD card inserted in to the Left Side of the Unit. The unit is supplied with an 8 GB SDHC

card in a FAT32 file format, which is the only file format supported. If you are looking to purchase a new SD card, it is

recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of

10 (4 absolute minimum). Racelogic recommend SD cards from quality brands such as Transcend, SanDisk, Kingston

or Lexar to ensure best results.

IMPORTANT – If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into

a FAT32 file system before it will work with a VBOX Touch unit. More information on this can be found here.

Screen Overview

Main screen example

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Setup

1. VBOX Touch has an internal patch antenna, meaning that in many circumstances, where the unit has a clear view

of the sky without any interference, an additional antenna is not required.

However, if required, mount the supplied external GPS antenna in the centre of the roof of the vehicle, away from

roof bars and other antennas. For more information on antenna mounting positions click here.

Note: The external antenna should be used If you are receiving NTRIP RTK corrections with a VBOX Touch RTK

unit.

2. If applicable, connect the external GNSS antenna to the VBOX Touch.

3. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit and attach to the vehicle

windscreen.

4. Connect the power via the Power socket.

5. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green

as long as the card has free space.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

6. When the unit has booted, select the Mode Button

and press LAP TIMING if it is not already selected.

7. Select the Settings Button

, then the Lap Timing option and navigate to the Track Settings. The unit will display the currently selected track

based on the GPS location. If multiple layouts are available, you can press the Select button to scroll through the

different options. Ensure that the correct circuit is selected!

8. If you have a VBOX Touch RTK unit and are intending to use RTK corrections, go to RTK Input within the Serial

Port Settings and either Enable NTRIP Mode and change the DGPS Baud Rate to 115200 if you are using an

NTRIP Modem, or if you are using a Static Base Station, leave Disabled and then select the correct baud rate -

either 115200 for a Racelogic blue boxed radio or 38400 for a Satel grey boxed radio.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Ensure that the NTRIP Modem or Static Base Station is connected/configured correctly.

Note: The external antenna should be used If you are receiving RTK corrections with a VBOX Touch RTK unit.

9. If you have a VBOX Touch RTK unit, it is also possible to change the 3rd tracked constellation between Beidou

and Glonass if required by navigating to GNSS Selection within the General Settings screen.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

10. If you are intending to use the serial output from the top CAN/Serial port to conduct Online Testing with VBOX

Test Suite or output lap timing parameters, go to Serial Output within the Serial Port Settings and change the

Output Mode to either VBOX Stream (live testing with VBOX Test Suite) or Lap Timing.

Note: Ensure correct hardware connections are made.

11. Press the Exit Button

to return to the Lap Timing screen.

12. Take the vehicle outside and wait for the VBOX Touch to gain satellite lock. The Satellite Icon should display

as solid green

,solid orange

or solid purple

depending on whether you have a VBOX Touch RTK unit.

Note: The first time that the unit is used, it may take up to 10 – 15 minutes to fully acquire satellites. After this, it

will usually take 1 – 2 minutes to acquire satellites.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

Otros manuales para VBOX Touch

Tabla de contenidos

Otros manuales de Registrador de datos de Racelogic

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Racelogic

Racelogic VBOX 3iV2 Manual de usuario

Racelogic

Racelogic VB20SL Manual de usuario

Racelogic

Racelogic VBOX Touch Manual de usuario

Racelogic

Racelogic VBOX IISX Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Racelogic

Racelogic VBOX 3i Manual de usuario

Racelogic

Racelogic VBOX Touch V2 Manual de usuario

Racelogic

Racelogic VBOX Touch Manual de usuario

Racelogic

Racelogic VBTOUCHR-V1 Manual de usuario

Racelogic

Racelogic VBOX Touch Manual de usuario

Racelogic

Racelogic VBOX Sport Manual de usuario

Racelogic

Racelogic VBOX 3i Manual de usuario

Racelogic

Racelogic PerformanceBox Sport Manual de usuario

Racelogic

Racelogic VBOX II Manual de usuario

Racelogic

Racelogic PerformanceBox Manual de usuario

Racelogic

Racelogic VBOX 3i Manual de usuario

Racelogic

Racelogic VBOX3i Manual de usuario

Racelogic

Racelogic Perfomance Box Touch V2 Manual

Racelogic

Racelogic VBOX Micro RLVBMIC01 Manual de usuario

Racelogic

Racelogic VBOX SIGMA Manual de usuario

Racelogic

Racelogic VBOX Touch Manual de usuario

Racelogic

Racelogic VB2SX Manual de usuario

Racelogic

Racelogic VBOX II Manual de usuario

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

MadgeTech

MadgeTech PRTemp140 Hoja de especificaciones

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario

APLICOM

APLICOM A11 Manual de usuario