R3D S3 Guía del usuario
R3D S3 3D Printer
Quick Operation Guide
*Please read the Quick Operation Guide carefully before using the
product and keep it in a safe place.
H1
H2
H1=H2
4.X axis is 100% paralleled.
Select the path where the slice software is installed,then click Next,click Install, the software will
automatically install until finished
The software will install the drive automatically, ckick Next to finish the installation
Note:
When selecting a support type, it is possible to determine whether it is necessary to add partial
support or entire support or without support by observing the model or slice interface. But in
principle it is better to avoid support or reduce support.Rotating the model can achieve the aim to
avoid or reduce the support.
When selecting the platform adhesion type, the brim or the raft can be appropriately added
according to the size of the land area and the height of the model.
You can click "file - preferences - language - English" to choose the language you want
Recommended according to the following parameters, you also can adjust them by your own settings
3、click the model and you will see the picture like below
5、Click "Layers", you can see every layer of your object.
4、Click the magnifying glass to zoom in or out the small model
6、Save the G-code to the SD card and insert it into the printer
Thanks for your
support
Should you have any questions, please feel free to contact us.
Welcome to vist our official website
www.createbot.net
Otros manuales de Impresora 3D de R3D
