Quectel LCC Series Manual de usuario

Module Secondary SMT

User Guide

LCC/LGA Module Series

Rev. Module_Secondary_SMT_User_Guide_V2.5

Date: 2019-03-11

Status: Released

www.quectel.com

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 1 / 25

Our aim is to provide customers with timely and comprehensive service. For any

assistance, please contact our company headquarters:

Quectel Wireless Solutions Co., Ltd.

7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China

Tel: +86 21 5108 6236

Email: [email protected]om

Or our local office. For more information, please visit:

http://www.quectel.com/support/sales.htm

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/technical.htm

Or email to: support@quectel.com

GENERAL NOTES

QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION

PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT

TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT

MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT

ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR

RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO

CHANGE WITHOUT PRIOR NOTICE.

THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF

QUECTEL WIRELESS SOLUTIONS CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION

AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE

FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF

DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR

REGISTRATION OF A UTILITY MODEL OR DESIGN.

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 2 / 25

About the Document

History

Revision

Date

Author

Description

1.0

2012-08-28

Gavin HOU

Initial

2.0

2013-08-26

Gavin HOU

Added the description of stencil-making in Chapter 4.2

2.1

2013-12-19

Gavin HOU

Modified Figure 3: Inward Shrinking and Outward Moving

2.2

2015-11-23

Meisy MEI

Added the description of stencil-making on UC/EC/GC

series in Chapter 4.2

2.3

2017-03-08

Alain HUANG

1. Added the description of stencil design requirements

for M66/M66-DS/MC60/L70-R/

L70-RL/L76-L/L76B/L80-R/L86/L96/EC20 R2.0/

EC21/EC25/EG91/EG95/BG96/FC10/FC20/SC10/

SC20/SG30/AG35 modules in Chapter 4.2.

2. Added desoldering and repair instructions in Chapter

5 and 6.

2.4

2018-06-02

Rowan WANG/

Alain HUANG

1. Updated the MSL rating of Quectel modules into 3.

2. Updated stencil design requirements in Chapter 4.2.

3. Optimized the recommended reflow soldering

requirements and thermal profile in Chapter 4.4.

2.5

2019-03-11

Alain HUANG

1. Deleted the tray packing in the packing methods

(Figure 2) in Chapter 2.2.

2. Updated the soldering requirements in Chapter 3.2.

3. Updated stencil design requirements in Chapter 4.2.

4. Updated the max temperature of reflow zone in

Chapter 4.4.

 LCC/LGA Module Series 
 Module Secondary SMT User Guide 
 
Module_Secondary_SMT_User_Guide 3 / 25 
 
 
 
Content 
About the Document...................................................................................................................................2 
Content.........................................................................................................................................................3 
Table Index...................................................................................................................................................4 
Figure Index.................................................................................................................................................5 
1Introduction..........................................................................................................................................6 
2Information about Modules.................................................................................................................7 
2.1. Surface-Mount Packaging Type...................................................................................................7 
2.2. Packing Methods..........................................................................................................................7 
3Requirements on Chip Mounter.........................................................................................................8 
3.1. Chip Mounter................................................................................................................................8 
3.2. Soldering Requirements ..............................................................................................................8 
4Attentions for Manufacturing .............................................................................................................9 
4.1. MSL and Moisture-proof Requirement.........................................................................................9 
4.2. Stencil Design Requirements.....................................................................................................10 
4.3. Mounting Process ......................................................................................................................18 
4.3.1. Load Materials..................................................................................................................18 
4.3.2. Automatic Placement.......................................................................................................19 
4.4. Reflow Soldering........................................................................................................................20 
5Desoldering ........................................................................................................................................22 
6Repair Instructions............................................................................................................................24 
7Appendix Reference..........................................................................................................................25 
 
 

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 4 / 25

Table Index

TABLE 1: STENCIL DESIGN REQUIREMENTS .............................................................................................. 10

TABLE 2: RECOMMENDED THERMAL PROFILE PARAMETERS ................................................................. 20

TABLE 3: HEAT GUN DESOLDERING REQUIREMENTS............................................................................... 22

TABLE 4: TERMS AND ABBREVIATIONS........................................................................................................ 25

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 5 / 25

Figure Index

FIGURE 1: TAPE & REEL PACKING .................................................................................................................. 7

FIGURE 2: HUMIDITY INDICATOR CARD......................................................................................................... 9

FIGURE 3: STEP-UP STENCILAREA.............................................................................................................. 18

FIGURE 4: AUTOMATIC PLACEMENT ............................................................................................................ 19

FIGURE 5: FIRST PIN AND MOUNTED PICTURE.......................................................................................... 19

FIGURE 6: RAMP-SOAK-SPIKE REFLOW PROFILE...................................................................................... 20

FIGURE 7: REMOVE MODULE........................................................................................................................ 23

FIGURE 8: MODULE SOLDERING QUALITY INSPECTION........................................................................... 23

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 6 / 25

1Introduction

This document describes the process of Quectel modules’ secondary SMT and desoldering. It is

applicable to all Quectel modules in LCC or LGA form factor.

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 7 / 25

2Information about Modules

2.1. Surface-Mount Packaging Type

Quectel modules adopt LCC or LGA package.

2.2. Packing Methods

Quectel provides tape and reel pack as shown in the following figure.

Figure 1: Tape & Reel Packing

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 8 / 25

3Requirements on Chip Mounter

3.1. Chip Mounter

⚫Feeder: Support auto tray feeder and auto reel feeder.

⚫Image processing: Optical plummet centering.

⚫Diameter of nozzle: Select the suitable nozzle according to the module size.

The recommended diameter of nozzle should be not less than 40% of the module’s shorter side. For

example, if the module size is 25mm×20mm, the nozzle diameter should be 8mm at least.

3.2. Soldering Requirements

1. It is recommended to use reflow soldering equipment with eight zones at least. For Quectel LTE,

LPWA, Automotive and Smart series modules, reflow soldering equipment with at least ten zones is

recommended.

2. In a lead-free reflow oven, the peak temperature of the actual solder joints on the component side of

an LGAmodule should be greater than 238°C , and the temperature of fixtures is recommended to be

240-245°C to avoid cold solder joints on LGAmodules.

NOTE

LCC/LGA Module Series

Module Secondary SMT User Guide

Module_Secondary_SMT_User_Guide 9 / 25

4Attentions for Manufacturing

4.1. MSL and Moisture-proof Requirement

Quectel SMD module is sensitive to moisture absorption. According to IPC-JEDEC standard, the moisture

sensitive level (MSL) of Quectel SMD modules is defined as “3”. Please make sure the package is intact

before using. After opening the package, please confirm the status of humidity indicator card in the

vacuum-sealed package. To prevent the module from permanent damage, baking before reflow soldering

is required if any circumstance below occurs:

⚫Humidity indicator card: At least one circular indicator is no longer blue.

⚫The seal is open and the module is exposed to air for more than 168 hours.

Normal Not blue

Figure 2: Humidity Indicator Card

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Quectel

Quectel

Quectel BG77 Suplemento

Quectel

Quectel UC15 Suplemento

Quectel

Quectel EC25 Mini PCIe Suplemento

Quectel

Quectel WCDMA Instrucciones de instalación y funcionamiento

Quectel

Quectel RM510Q-GL Suplemento

Quectel

Quectel LTE Module Series Manual de usuario

Quectel

Quectel UG89 Suplemento

Quectel

Quectel UG96 Manual de usuario

Quectel

Quectel 5G Module Series Suplemento

Quectel

Quectel EG91 Series Suplemento

Quectel

Quectel EM160R-GL Suplemento

Quectel

Quectel SC200L-EM Suplemento

Quectel

Quectel EP06 Suplemento

Quectel

Quectel LTE-A Series Suplemento

Quectel

Quectel SG560D Series Suplemento

Quectel

Quectel EC25 series Manual de usuario

Quectel

Quectel EG25-G Suplemento

Quectel

Quectel EM12-G Suplemento

Quectel

Quectel RM502Q-GL Suplemento

Quectel

Quectel SC20-A Manual de usuario

Quectel

Quectel EC200U Series Instrucciones de instalación y funcionamiento

Quectel

Quectel BG95 Series Instrucciones de instalación y funcionamiento

Quectel

Quectel RM502Q-GL Suplemento

Quectel

Quectel EC20 Manual de servicio

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario