Pyle PLPTS26 Manual de usuario

PLPTS26

Laptop Computer Stand for

DJs with Storage Shelf

http://www.pyleaudio.com

Thanks for purchasing the PLPTS26, an awesome laptop stand from Pyle Pro that’s

perfect for DJing. It places your laptop at an angle for easy access while you drop

your beats. Plus, it has a variable height adjustment and a storage shelf to hold

your cell phone, memory cards, and anything else you might need. Holds up to 8

lbs. Also compatible with CD players, controllers, EFX machines, and lighting

controllers.

Specifications:

Ideal For Holding Your Laptop, CD Player/Controller,

EFX Machine Or Lighting Controller

Includes a Storage Shelf

This Versatile Stand Can Stand Alone On Any Flat

Surface For Quick And Easy Set-Up

Features 4 Easy Line-It-Up Height Adjustments

Platform Dimensions: 9.25''w x 10.8''D

Height Range: 6.3 - 10.9 inches

Weight Capacity: 8 lbs.

Your kit includes one (1) set of the following items:

2 x L-bar (left, right)

2 x L-bar with rubber stoppers (left,

right)

2 x support bars

2 x bar extenders (unscrews to 4)

1 x storage rack plate

1. Start by removing the end screws from the

two support bars. Additionally, loosen up the

screws on the storage rack plate so that the

plate can expand freely.

2. Separate the support bar extenders by

unscrewing them. Then, screw on an

extender to each end of both bars.

3. Next, you will be connecting two of the L-

bars and the Use one with rubber stoppers

and one without. Make sure that the two L-

bars are for the same side. The base and the

rubberized part of each respective L-bar

should be facing the same direction. Layer the

pieces as follows: bottom L-bar (without

stopper), top L-bar (with stopper), storage

tray. Insert a screw through the outside-

facing part and screw on the support bar on

the inside.

3. Repeat the L-bar, storage plate, and

support bar steps for the other side.

4. Connect the other support bar between the

two L-bar supports.

Once everything is connected, you can

tighten the screws on the storage plate.

5. Your stand is now complete!

Tabla de contenidos

Otros manuales de Rack y soporte de Pyle

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario

Vivo

Vivo MOUNT-HP23XW Manual de usuario