Pyle PLRNSTND10 Manual de instrucciones
DIRECTIONS:
1. Attach the supports to the legs.
2. Assemble the cross bar on the leg and upright supports.
3. Tighten all the screws
4. Stick the rubber feet on the legs. There are two for each leg;
they go on the front and back of each leg
5. Then you can mount your equipment on this rack stand
with the screws and washers supplied. You can either place
it on a table or the ground
19” RACK STAND
QUICK USER GUIDE
MODEL: PLRNSTND10
Thank you for choosing this 19” rack stand.
IN THE BOX:
(2) Uprights supports
(2) Leg tubes
(2) Cross bars
(8) Screws
(may already be in tubes, in which case, you’ll need to remove them for assembly)
(4) Transparent rubber feet
* Additional screws and washers needed for mounting
Upright
Support
Leg
Tube
Cross
Bar
SPECIFICATIONS:
Construction Material: Steel
Maximum Weight Load Capacity: 110 lbs.
Assembled Dimensions (L x W x H):
19.3’’ x 14.0’’ x 21.7’’
X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for pyle manufacturer:
Other Similar products are found below :
PDS442 PSPVC6 PDWM4300 PDWM4400 PDMW6 PDBT28 PDJSD2 PLRSTND10 PLG3.2 PSCRIM2B PSCRIM2W PDWM2115
PDWM1904 PSTND1 PPA15 PPA10 PDS341 PDS122 PDMW5 PLAM40 PFN41 PCT40 PPA6 PDMR6 PPA8 PDS221
Tabla de contenidos
Otros manuales de Rack y soporte de Pyle
Pyle
Pyle PMKS46 Manual de usuario
Pyle
Pyle PMKSPAD35 Manual de usuario
Pyle
Pyle PMKS40 Manual de usuario
Pyle
Pyle PTVSTNDPT3215 Manual de usuario
Pyle
Pyle PLPTS4X2 Manual de usuario
Pyle
Pyle PSTND13 Manual de usuario
Pyle
Pyle PSPAD15 Manual de usuario
Pyle
Pyle PLPTS25 Manual de usuario
Pyle
Pyle PLCTND44 Manual de usuario
Pyle
Pyle PMKS19 Manual de usuario
Pyle
Pyle PLPTS2 Manual de usuario
Pyle
Pyle PLPTS38 Manual de usuario
Pyle
Pyle PMKSPAD1 Manual de usuario
Pyle
Pyle PLPTS1 Manual de usuario
Pyle
Pyle PSW772 Manual de usuario
Pyle
Pyle PMKS38 Manual de usuario
Pyle
Pyle PSTNDSON17 Manual de usuario
Pyle
Pyle PPLS209 Manual de usuario
Pyle
Pyle LPTS25X2 Manual de usuario
Pyle
Pyle PLCTND44 Manual de usuario
