Pyle PLPTS1 Manual de usuario
PLPTS1
Professional DJ Grade Laptop/Notebook Computer Rolling Stand
Construction Manual
Visit us online @
www.PyleAudio.com
Included parts:
8 x short screws
4 x long screws
4 x nuts
4 x adjustable clamps
4 x wheels
1 x I-bar
1 x T-bar
1 x main plate
1 x small plate
You will need a Phillips-head screwdriver to assemble your stand.
Constructing the PLPTS1.
1. Start by laying out the I-bar upside down, exposing a screw
hole at each corner:
2. Screw a wheel into each corner:
3. Screw the T-bar into the I-bar using the four long screws and
nuts:
4. Attach the adjustable clamps to the T-bar. Unscrew the clamp,
pop them onto the bar, and then screw the clamp back in.
5. Attach the main plate to the clamps on the longer end of the T-
bar and the small plate to the shorter end using the included short
screws.
6. You’re done! You can adjust the height of your stand using the
metal lock on the T-bar:
Otros manuales de Rack y soporte de Pyle
Pyle
Pyle PLRNSTND10 Manual de instrucciones
Pyle
Pyle PLPTS25 Manual de usuario
Pyle
Pyle PLPTS4X2 Manual de usuario
Pyle
Pyle PTVSTNDPT3215 Manual de usuario
Pyle
Pyle PMKSKT35 Manual de usuario
Pyle
Pyle PMKS40 Manual de usuario
Pyle
Pyle PMKS19 Manual de usuario
Pyle
Pyle PSTNDSON17 Manual de usuario
Pyle
Pyle PSPAD15 Manual de usuario
Pyle
Pyle PMKS22 Manual de usuario
Pyle
Pyle PLPTS35 Manual de usuario
Pyle
Pyle PMKS15 Manual de usuario
Pyle
Pyle PMKSPAD35 Manual de usuario
Pyle
Pyle PSTND14 Manual de usuario
Pyle
Pyle PLPTS38 Manual de usuario
Pyle
Pyle PSTND13 Manual de usuario
Pyle
Pyle PTVSTNDPT3215 Manual de usuario
Pyle
Pyle LPTS25X2 Manual de usuario
Pyle
Pyle PKST58 Manual de usuario
Pyle
Pyle PLPTS38 Manual de usuario
