ProSoft Technology InRax MVI71-DNPSNET Manual de usuario

MVI71-DNPSNET

PLC Platform

Distributed Network Protocol Interface

Module

September 22, 2008

USER MANUAL

Please Read This Notice

Successful application of this module requires a reasonable working knowledge of the Rockwell Automation PLC

hardware, the MVI71-DNPSNET Module and the application in which the combination is to be used. For this reason,

it is important that those responsible for implementation satisfy themselves that the combination will meet the needs

of the application without exposing personnel or equipment to unsafe or inappropriate working conditions.

This manual is provided to assist the user. Every attempt has been made to ensure that the information provided is

accurate and a true reflection of the product's installation requirements. In order to ensure a complete understanding

of the operation of the product, the user should read all applicable Rockwell Automation documentation on the

operation of the Rockwell Automation hardware.

Under no conditions will ProSoft Technology be responsible or liable for indirect or consequential damages resulting

from the use or application of the product.

Reproduction of the contents of this manual, in whole or in part, without written permission from ProSoft Technology

is prohibited.

Information in this manual is subject to change without notice and does not represent a commitment on the part of

ProSoft Technology Improvements and/or changes in this manual or the product may be made at any time. These

changes will be made periodically to correct technical inaccuracies or typographical errors.

Warning: This module is not hot-swappable! Always remove power from the rack before inserting or removing this

module, or damage may result to the module, the processor, or other connected devices.

Power, Input, and Output (I/O) wiring must be in accordance with Class 1, Division 2 wiring

methods, Article 501-4 (b) of the National Electrical Code, NFPA 70 for installation in the U.S.,

or as specified in Section 18-1J2 of the Canadian Electrical Code for installations in Canada,

and in accordance with the authority having jurisdiction.

A Warning - Explosion Hazard - Substitution of components may impair suitability for Class 1, Division 2.

B Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring modules.

C Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is

known to be non-hazardous.

Battery Life Advisory

All modules in the MVI series use a rechargeable Lithium Vanadium Pentoxide battery to backup the 512K SRAM

memory, real-time clock, and CMOS. The battery should last for the life of the module.

The module must be powered for approximately twenty hours before it becomes fully charged. After it is fully charged,

the battery provides backup power for the CMOS setup and configuration data, the real-time clock, and the 512K

SRAM memory for approximately 21 days.

Before you remove a module from its power source, ensure that the battery within the module is fully charged. A fully

charged battery will hold the BIOS settings (after being removed from its power source) for a limited number of days.

When the battery is fully discharged, the module will revert to the default BIOS settings.

Note: The battery is not user replaceable.

ProSoft® Product Documentation

In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments.

User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided on the enclosed CD and are

available at no charge from our web site: http://www.prosoft-technology.com

Printed documentation is available for purchase. Contact ProSoft Technology for pricing and availability.

Asia Pacific: +603.7724.2080

Europe, Middle East, Africa: +33.5.34.36.87.20

Latin America: +1.281.298.9109

North America: +1.661.716.5100

Your Feedback Please

We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,

compliments or complaints about the product, documentation or support, please write or call us.

ProSoft Technology

1675 Chester Avenue, Fourth Floor

Bakersfield, CA 93301

+1 (661) 716-5100

+1 (661) 716-5101 (Fax)

http://www.prosoft-technology.com

MVI71-DNPSNET User Manual

September 22, 2008

ProSoft Technology ®, ProLinx ®, inRAx ®, ProTalk® and RadioLinx ® are Registered Trademarks of ProSoft

Technology, Inc.

Contents MVI71-DNPSNET ♦PLC Platform

Distributed Network Protocol Interface Module

ProSoft Technology, Inc. Page 5 of 100

September 22, 2008

Contents

Please Read This Notice 2

Battery Life Advisory ...........................................................................................................................3

ProSoft® Product Documentation.......................................................................................................3

Your Feedback Please........................................................................................................................3

Guide to the MVI71-DNPSNET User Manual 7

1Start Here 9

1.1 System Requirements...............................................................................................9

1.2 Package Contents...................................................................................................10

1.3 Setting Jumpers ......................................................................................................11

1.4 Install the Module in the Rack .................................................................................12

1.5 Connect your PC to the Processor..........................................................................13

1.6 Download the Sample Program to the Processor...................................................14

1.7 Connect your PC to the Module ..............................................................................17

2Module Configuration 19

2.1 Installing and Configuring the Module.....................................................................19

2.2 IP Address...............................................................................................................22

2.3 Uploading and Downloading the Configuration File................................................23

3Ladder Logic 29

3.1 Module Data ............................................................................................................29

4Diagnostics and Troubleshooting 33

4.1 Reading Status Data from the Module....................................................................33

4.2 LED Status Indicators..............................................................................................43

5Reference 47

5.1 Product Specifications.............................................................................................47

5.2 Functional Overview................................................................................................49

5.3 Cable Connections..................................................................................................62

5.4 MVI71-DNPSNET Configuration Forms..................................................................65

5.5 MVI71-DNPSNET Status Data................................................................................69

5.6 MVI71-DNPSNET Module Internal Indication Bits (IIN Bits) for DNP Server .........70

5.7 Device Profile ..........................................................................................................72

5.8 DNP Subset Definition.............................................................................................73

5.9 MVI71-DNPSNET Application Design.....................................................................76

5.10 Event Size Computation..........................................................................................88

Contents MVI71-DNPSNET ♦PLC Platform

Distributed Network Protocol Interface Module

Page 6 of 100 ProSoft Technology, Inc.

September 22, 2008

6Support, Service & Warranty 91

6.1 How to Contact Us: Technical Support................................................................... 91

6.2 Return Material Authorization (RMA) Policies and Conditions............................... 92

6.3 LIMITED WARRANTY ............................................................................................ 94

Index 99

Start Here MVI71-DNPSNET ♦PLC Platform

Distributed Network Protocol Interface Module

ProSoft Technology, Inc. Page 7 of 100

September 22, 2008

Guide to the MVI71-DNPSNET User Manual

Function Section to Read Details

Introduction

(Must Do)

→Start Here (page 9) This Section introduces the customer to the

module. Included are: package contents,

system requirements, hardware installation, and

basic configuration.

Verify Communication,

Diagnostic and

Troubleshooting

→Verifying

Communication

(page 43)

Diagnostics and

Troubleshooting

(page 33)

This section describes how to verify

communications with the network. Diagnostic

and Troubleshooting procedures.

Reference

Product Specifications

Functional Overview

Glossary

→Reference (page 47)

Functional Overview

(page 49)

Product

Specifications (page

47)

These sections contain general references

associated with this product, Specifications, and

the Functional Overview.

Support, Service, and

Warranty

Index

→Support, Service

and Warranty (page

91)

This section contains Support, Service and

Warranty information.

Index of chapters.

MVI71-DNPSNET ♦PLC Platform Start Here

Distributed Network Protocol Interface Module

Page 8 of 100 ProSoft Technology, Inc.

September 22, 2008

Start Here MVI71-DNPSNET ♦PLC Platform

Distributed Network Protocol Interface Module

ProSoft Technology, Inc. Page 9 of 100

September 22, 2008

1 Start Here

In This Chapter

System Requirements .............................................................................9

Package Contents .................................................................................10

Setting Jumpers ....................................................................................11

Install the Module in the Rack ...............................................................12

Connect your PC to the Processor ........................................................13

Download the Sample Program to the Processor..................................14

Connect your PC to the Module ............................................................17

Installing the MVI71-DNPSNET module requires a reasonable working

knowledge of the Rockwell Automation hardware, the MVI71-DNPSNET Module

and the application in which they will be used.

Caution: It is important that those responsible for implementation can complete the

application without exposing personnel, or equipment, to unsafe or inappropriate working

conditions. Safety, quality and experience are key factors in a successful installation.

1.1 System Requirements

The MVI71-DNPSNET module requires the following minimum hardware and

software components:

Rockwell Automation PLC processor, with compatible power supply and one

free slot in the rack, for the MVI71-DNPSNET module. The module requires

800mA of available power.

The PLC Processor must provide for at least 64 words of BTR/BTW area,

otherwise the module may not function correctly.

Rockwell Automation RSLogix 5 programming software.

Rockwell Automation RSLinx communication software

Pentium® 100 MHz minimum. Pentium III 700 MHz (or better) recommended

Supported operating systems:

oMicrosoft Windows XP

oMicrosoft Windows 2000

oMicrosoft Windows NT v4.0 with Service Pack 3 or greater

oMicrosoft Windows ME

oMicrosoft Windows 98

64 Mbytes of RAM minimum, 256 Mbytes of RAM recommended

MVI71-DNPSNET ♦PLC Platform Start Here

Distributed Network Protocol Interface Module

Page 10 of 100 ProSoft Technology, Inc.

September 22, 2008

100 Mbytes of free hard disk space (or more based on application

requirements)

256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color

1024 ×768 recommended)

CD-ROM drive

3.5 inch floppy disk drive

HyperTerminal or other terminal emulator program capable of file transfers

using Zmodem protocol.

1.2 Package Contents

The following components are included with your MVI71-DNPSNET module, and

are all required for installation and configuration.

Important: Before beginning the installation, please verify that all of the following items are

present.

Qty. Part Name Part Number Part Description

1 MVI71-

DNPSNET

Module

MVI71-DNPSNET Distributed Network Protocol Interface Module

1 Cable Cable #15, RS232

Null Modem

For RS232 Connection to the CFG Port

3 Cable Cable #14, RJ45 to

DB9 Male Adapter

cable

For DB9 Connection to Module's Port

2 Adapter 1454-9F Two Adapters, DB9 Female to Screw Terminal. For

RS422 or RS485 Connections to Port 1 and 2 of the

Module

1 ProSoft

Solutions CD

Contains sample programs, utilities and

documentation for the MVI71-DNPSNET module.

If any of these components are missing, please contact ProSoft Technology

Support for replacement parts.

Tabla de contenidos

Otros manuales de Unidad de control de ProSoft Technology

ProSoft Technology

ProSoft Technology MVI69E-LDM-MQTT Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI56-HART Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-MCM Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI71-BDW Manual de usuario

ProSoft Technology

ProSoft Technology ILX800-SMSG Manual de usuario

ProSoft Technology

ProSoft Technology MVI69-GSC CompactLogix Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-LDM Manual de usuario

ProSoft Technology

ProSoft Technology MVI69E-GEC Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI56E-GSC Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI56-DH485R Manual de usuario

ProSoft Technology

ProSoft Technology inRAX MVI69-S3964R Manual de usuario

ProSoft Technology

ProSoft Technology ProLinx ASCII Nota de publicación

ProSoft Technology

ProSoft Technology CompactLogix MVI69E-MBS Manual de usuario

ProSoft Technology

ProSoft Technology MVI69E-MBTCP Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI46-GEC Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI56-DNPSNET Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI46-DFNT Manual de usuario

ProSoft Technology

ProSoft Technology MVI69-DFCM Manual de usuario

ProSoft Technology

ProSoft Technology ControlLogix inRAx MVI56E-MNETR Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI69-101M Manual de usuario

ProSoft Technology

ProSoft Technology ProTalk PTQ-104C Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-LDM-MQTT Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-SIE Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI56-CAS Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario