ProSoft Technology ControlLogix MVI56E-SMGC Manual de usuario

MVI56E-SMGC

ControlLogix™Platform

Enhanced FMC722 TPU General

Communication Module

June18, 2021

USER MANUAL

MVI56E-SMGC ♦ ControlLogix™ Platform Contents

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 2 of 98

Your Feedback Please

We always want you to feel that you made the right decision to use our products. If you have suggestions,

comments, compliments or complaints about our products, documentation, or support, please write or call

us.

How to Contact Us

ProSoft Technology, Inc.

+1 (661) 716-5100

+1 (661) 716-5101 (Fax)

www.prosoft-technology.com

[email protected]

MVI56E-SMGC User Manual

June 18, 2021

ProSoft Technology®, is a registered copyright of ProSoft Technology, Inc. All other brand or product names

are or may be trademarks of, and are used to identify products and services of, their respective owners.

In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product

shipments. User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided at our

website: www.prosoft-technology.com

Content Disclaimer

This documentation is not intended as a substitute for and is not to be used for determining suitability or

reliability of these products for specific user applications. It is the duty of any such user or integrator to

perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to

the relevant specific application or use thereof. Neither ProSoft Technology nor any of its affiliates or

subsidiaries shall be responsible or liable for misuse of the information contained herein. Information in this

document including illustrations, specifications and dimensions may contain technical inaccuracies or

typographical errors. ProSoft Technology makes no warranty or representation as to its accuracy and

assumes no liability for and reserves the right to correct such inaccuracies or errors at any time without

notice. If you have any suggestions for improvements or amendments or have found errors in this

publication, please notify us.

No part of this document may be reproduced in any form or by any means, electronic or mechanical,

including photocopying, without express written permission of ProSoft Technology. All pertinent state,

regional, and local safety regulations must be observed when installing and using this product. For reasons

of safety and to help ensure compliance with documented system data, only the manufacturer should

perform repairs to components. When devices are used for applications with technical safety requirements,

the relevant instructions must be followed. Failure to use ProSoft Technology software or approved software

with our hardware products may result in injury, harm, or improper operating results. Failure to observe this

information can result in injury or equipment damage.

MVI56E-SMGC ♦ ControlLogix™ Platform Contents

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 3 of 98

Open Source Information

Open Source Software used in the product

The product contains, among other things, Open Source Software files, as defined below, developed by third

parties and licensed under an Open Source Software license. These Open Source Software files are

protected by copyright. Your right to use the Open Source Software is governed by the relevant applicable

Open Source Software license conditions. Your compliance with those license conditions will entitle you to

use the Open Source Software as foreseen in the relevant license. In the event of conflicts between other

ProSoft Technology, Inc. license conditions applicable to the product and the Open Source Software license

conditions, the Open Source Software conditions shall prevail. The Open Source Software is provided

royalty-free (i.e. no fees are charged for exercising the licensed rights). Open Source Software contained in

this product and the respective Open Source Software licenses are stated in the module webpage, in the

link Open Source.

If Open Source Software contained in this product is licensed under GNU General Public License (GPL),

GNU Lesser General Public License (LGPL), Mozilla Public License (MPL) or any other Open Source

Software license, which requires that source code is to be made available and such source code is not

already delivered together with the product, you can order the corresponding source code of the Open

Source Software from ProSoft Technology, Inc. - against payment of the shipping and handling charges - for

a period of at least 3 years since purchase of the product. Please send your specific request, within 3 years

of the purchase date of this product, together with the name and serial number of the product found on the

product label to:

ProSoft Technology, Inc.

Director of Engineering

9201 Camino Media, Suite 200

Bakersfield, CA 93311 USA

Warranty regarding further use of the Open Source Software

ProSoft Technology, Inc. provides no warranty for the Open Source Software contained in this product, if

such Open Source Software is used in any manner other than intended by ProSoft Technology, Inc. The

licenses listed below define the warranty, if any, from the authors or licensors of the Open Source Software.

ProSoft Technology, Inc. specifically disclaims any warranty for defects caused by altering any Open Source

Software or the product’s configuration. Any warranty claims against ProSoft Technology, Inc. in the event

that the Open Source Software contained in this product infringes the intellectual property rights of a third

party are excluded. The following disclaimer applies to the GPL and LGPL components in relation to the

rights holders:

“This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even

the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

General Public License and the GNU Lesser General Public License for more details.”

For the remaining open source components, the liability exclusions of the rights holders in the respective

license texts apply. Technical support, if any, will only be provided for unmodified software.

MVI56E-SMGC ♦ ControlLogix™ Platform Contents

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 4 of 98

Important Safety Information

North America Warnings

A Warning –Explosion Hazard –When in hazardous locations, turn off power before replacing or wiring

modules.

B Warning –Explosion Hazard –Substitution of Any Components May Impair Suitability for Class I,

Division 2.

C Warning –Explosion Hazard –Do Not Disconnect Equipment Unless Power Has Been Switched Off Or

The Area is Known To Be Non-Hazardous.

D Class 2 Power

ATEX Warnings and Conditions of Safe Usage:

Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction.

A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring

modules.

B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the

area is known to be non-hazardous.

C These products are intended to be mounted in an ATEX Certified, tool-secured, IP54 enclosure. The

devices shall provide external means to prevent the rated voltage being exceeded by transient

disturbances of more than 40%. This device must be used only with ATEX certified backplanes.

D Before operating the reset switch, be sure the area is known to be non-hazardous.

E If the equipment is used in a manner not specified by the manufacturer, the protection provided by the

equipment may be impaired.

Agency Approvals & Certifications

Please visit our website: www.prosoft-technology.com

For professional users in the European Union

If you wish to discard electrical and electronic equipment (EEE), please contact your dealer

or supplier for further information.

Warning –Cancer and Reproductive Harm –www.P65Warnings.ca.gov

MVI56E-SMGC ♦ ControlLogix™ Platform Contents

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 5 of 98

Contents

Your Feedback Please................................................................................................................2

How to Contact Us.......................................................................................................................2

Content Disclaimer......................................................................................................................2

Open Source Information ............................................................................................................3

Open Source Software used in the product ................................................................................3

Warranty regarding further use of the Open Source Software....................................................3

Important Safety Information.......................................................................................................4

1Start Here 7

1.1 System Requirements .......................................................................................7

1.2 Setting Jumpers.................................................................................................8

1.3 Installing the Module in the Rack.......................................................................9

1.3.1 Before You Import the Add-On Instruction ......................................................10

1.3.2 Creating the Module ........................................................................................11

1.3.3 Importing the Optional Add-On Instruction......................................................15

1.4 Downloading the Sample Program to the Processor.......................................18

2MVI56E-SMGC Configuration 19

2.1 Using ProSoft Configuration Builder Software.................................................19

2.1.1 Installing ProSoft Configuration Builder...........................................................19

2.1.2 Upgrading from MVI56-SMGC in ProSoft Configuration Builder.....................20

2.1.3 Setting Up the Project......................................................................................21

2.1.4 Setting Module Parameters.............................................................................23

2.2 Connecting Your PC to the Module.................................................................25

2.2.1 Using CIPconnect to Connect to the Module...................................................25

2.2.2 Using RSWho to Connect to the Module.........................................................35

2.2.3 Connecting Your PC to the Module's Ethernet Port ........................................36

2.3 Downloading the Project to the Module...........................................................39

3Using Controller Tags 41

3.1 Main Data Object (SMGCModule)...................................................................41

3.1.1 Status Object (SMGCInStat)............................................................................42

3.1.2 Backplane Variables (SMGCBackplane).........................................................43

3.1.3 Last Error Data (SMGC_0103_LastErr) ..........................................................43

3.1.4 Command Response Data (SMGC_0104_CmdResp)....................................44

3.1.5 Transmit Data (SMGCSendData)....................................................................44

3.1.6 Other Support Objects.....................................................................................45

3.2 Database Values .............................................................................................46

3.3 Helper Objects.................................................................................................47

4Diagnostics and Troubleshooting 48

4.1 Ethernet LED Indicators...................................................................................48

4.1.1 Scrolling LED Status Indicators.......................................................................49

MVI56E-SMGC ♦ ControlLogix™ Platform Contents

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 6 of 98

4.1.2 Non-Scrolling LED Status Indicators ...............................................................50

4.2 Clearing a Fault Condition ...............................................................................50

4.3 Troubleshooting the LEDs...............................................................................51

4.4 Using the Diagnostics Menu in ProSoft Configuration Builder ........................52

4.5 Diagnostics Menu ............................................................................................55

4.5.1 Module Information..........................................................................................56

4.5.2 Network Information.........................................................................................57

4.5.3 Monitoring Backplane Information...................................................................58

4.5.4 SMGC Client....................................................................................................60

4.6 I/O Tag Configuration ......................................................................................62

4.6.1 AI Tags.............................................................................................................62

4.6.2 AO Tags...........................................................................................................62

4.6.3 DI Tags ............................................................................................................63

4.6.4 DO Tags...........................................................................................................63

4.7 Reading Status Data from the Module ............................................................64

4.8 Connecting to the Module's Webpage.............................................................66

4.8.1 Firmware Upgrade...........................................................................................67

5Reference 68

5.1 Product Specifications .....................................................................................68

5.1.1 Hardware Specifications..................................................................................68

5.2 Functional Overview ........................................................................................69

5.2.1 General Concepts............................................................................................69

5.3 Ethernet Cable Specifications..........................................................................92

5.3.1 Ethernet Cable Configuration ..........................................................................92

5.3.2 Ethernet Performance......................................................................................92

5.4 Using the Sample Program..............................................................................93

5.4.1 Opening the Sample Program in Studio 5000.................................................93

5.4.2 Selecting the Controller Type ..........................................................................95

5.4.3 Selecting the Slot Number for the Module.......................................................96

5.4.4 Downloading the Sample Program to the Processor.......................................97

5.4.5 Adding the Sample Ladder to an Existing Application.....................................97

6Support, Service & Warranty 98

6.1 Contacting Technical Support..........................................................................98

6.2 Warranty Information .......................................................................................98

MVI56E-SMGC ♦ ControlLogix™ Platform Start Here

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 7 of 98

1 Start Here

To get the most benefit from this User Manual, you should have the following skills:

Rockwell Automation®Studio 5000 software: launch the program, configure

ladder logic, and transfer the ladder logic to the processor

Microsoft Windows®:install and launch programs, execute menu commands,

navigate dialog boxes, and enter data

Hardware installation and wiring: install the module, and safely connect FMC722

TPU and ControlLogix devices to a power source and to the MVI56E-SMGC

module’s application port(s)

1.1 System Requirements

The MVI56E-SMGC module requires the following minimum hardware and software

components:

Rockwell Automation ControlLogix®processor (firmware version 10 or higher) with

compatible limited voltage power supply and one free slot in the rack for the MVI56E-

SMGC module. The module requires 800mA of available 5 VDC and 3 mA of

available 24 VDC power.

Rockwell Automation Studio 5000 programming software

oVersion 16 or higher required for Add-On Instruction

oVersion 15 or lower must use Sample Ladder, available from www.prosoft-

technology.com

Rockwell Automation RSLinx®communication software version 2.51 or higher

ProSoft Configuration Builder (PCB) (included)

Pentium®II 450 MHz minimum. Pentium III 733 MHz (or better) recommended

Supported operating systems:

oMicrosoft Windows 10 Pro x64

oMicrosoft Windows 7 Professional x64

oMicrosoft Windows 7 Professional x86

oMicrosoft Windows XP Pro SP2

100 Mbytes of free hard disk space (or more based on application requirements)

Note: The Hardware and Operating System requirements in this list are the minimum recommended to

install and run software provided by ProSoft Technology®. Other third party applications may have different

minimum requirements. Refer to the documentation for any third party applications for system requirements.

Note: You can install the module in a local or remote rack. For remote rack installation, the module requires

EtherNet/IP or ControlNet communication with the processor.

MVI56E-SMGC ♦ ControlLogix™ Platform Start Here

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 8 of 98

1.2 Setting Jumpers

The Setup Jumper acts as "write protection" for the module’s firmware. In "write

protected" mode, the Setup pins are not connected, and the module’s firmware cannot

be overwritten. The module is shipped with the Setup jumper OFF. Do not jumper the

Setup pins together unless you are directed to do so by ProSoft Technical Support (or

you want to update the module firmware).

The following illustration shows the MVI56E-SMGC jumper configuration with the Setup

Jumper OFF.

Note: If you are installing the module in a remote rack, you may prefer to leave the Setup pins jumpered.

You can update the module’s firmware without requiring physical access to the module.

Security considerations:

Leaving the Setup pin jumpered leaves the module open to unexpected firmware updates.

You should consider segmenting the data flow for security reasons. Per IEC 62443-1-1, you should align

with IEC 62443 and implement segmentation of the control system. Relevant capabilities are firewalls,

unidirectional communication, DMZ. Oil and Gas customers should also see DNVGL-RP-G108 for guidance

on partitioning.

You should practice security by design, per IEC 62443-4-1, including layers of security and detection. The

module relies on overall network security design, as it is only one component of what should be a defined

zone or subnet.

MVI56E-SMGC ♦ ControlLogix™ Platform Start Here

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 9 of 98

1.3 Installing the Module in the Rack

Make sure your ControlLogix processor and power supply are installed and configured,

before installing the MVI56E-SMGC module. Refer to your Rockwell Automation product

documentation for installation instructions.

Warning: You must follow all safety instructions when installing this or any other electronic devices. Failure

to follow safety procedures could result in damage to hardware or data, or even serious injury or death to

personnel. Refer to the documentation for each device you plan to connect to verify that suitable safety

procedures are in place before installing or servicing the device.

After you have checked the placement of the jumpers, insert the MVI56E-SMGC into the

ControlLogix chassis. Use the same technique recommended by Rockwell Automation

to remove and install ControlLogix modules.

Warning: When you insert or remove the module while backplane power is on, an electrical arc can occur.

An electrical arc can cause personal injury or property damage by sending an erroneous signal to the

system’s actuators. This can cause unintended machine motion or loss of process control. Electrical arcs

may also cause an explosion when they happen in a hazardous environment. Verify that power is removed

or the area is non-hazardous before proceeding.

Repeated electrical arcing causes excessive wear to contacts on both the module and its mating connector.

Worn contacts may create electrical resistance that can affect module operation.

Note: If you insert the module improperly, the system may stop working or may behave unpredictably.

Note: When using the XT version (if applicable), you must use the 1756-A5XT or 1756-A7LXT chassis to

uphold the XT specifications. In these chassis, modules are spaced further apart than in standard

ControlLogix chassis. Blank spacers are inserted between active modules.

MVI56E-SMGC ♦ ControlLogix™ Platform Start Here

Enhanced FMC722 TPU General Communication Module User Manual

ProSoft Technology, Inc. Page 10 of 98

1.3.1 Before You Import the Add-On Instruction

Note: This section only applies if your processor is using Studio 5000 version 16 or higher.

An optional Add-On Instruction file is provided for the MVI56E-SMGC module. The main

logic will be provided as a ladder logic file (not Add-On Instruction).

Download the files from www.prosoft-technology.com. Save them to a convenient

location in your PC, such as Desktop or My Documents.

File Name

Description

MVI56ESMGC_Optional_AddOn_Rung_v1_x.L5X.

A newer version may be available at:

www.prosoft-technology.com

Optional L5X file containing additional Add-

On Instruction with logic for changing

Ethernet configuration and clock settings.

1.3.1.1 About the Optional Add-On Instruction

The Optional Add-On Instruction performs the following tasks:

Read/Write Ethernet Configuration

Allows the processor to read or write the module IP address, subnet mask, and

network gateway IP address.

Read/Write Module Clock Value

Allows the processor to read and write the module clock settings. The module's free-

running clock also stores the last time that the Ethernet configuration was changed

or the last time the module was restarted or rebooted. The date and time of the last

change or restart is displayed on the scrolling LED during module power-up/start-up

sequence.

Note: You can also set the date and time from the module's web page.

Important: The Optional Add-On Instruction supports only the two features listed above. You must use the

regular MVI56E-SMGC Add-On Instruction for all other features including backplane transfer and FMC722

TPU data communication.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de ProSoft Technology

ProSoft Technology

ProSoft Technology MVI69E-GSC Manual de usuario

ProSoft Technology

ProSoft Technology MVI71-GEC Manual de usuario

ProSoft Technology

ProSoft Technology InRax MVI71-DNPSNET Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI46-GEC Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI56E-GSC Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI56-HART Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI56-DNPSNET Manual de usuario

ProSoft Technology

ProSoft Technology inRax MVI71-BDW Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-LDM Manual de usuario

ProSoft Technology

ProSoft Technology MVI69E-GEC Manual de usuario

ProSoft Technology

ProSoft Technology inRAX MVI69-S3964R Manual de usuario

ProSoft Technology

ProSoft Technology AN-X-MOD Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI46-DFNT Manual de usuario

ProSoft Technology

ProSoft Technology MVI69L-MBTCP Manual de usuario

ProSoft Technology

ProSoft Technology PLX51-HART-4O Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-LDM-MQTT Manual de usuario

ProSoft Technology

ProSoft Technology MVI69E-LDM-MQTT Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-MCM Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI46-PDPMV1 Manual de usuario

ProSoft Technology

ProSoft Technology ProLinx ASCII Nota de publicación

ProSoft Technology

ProSoft Technology MVI69-DFCM Manual de usuario

ProSoft Technology

ProSoft Technology MVI56E-61850S Manual de usuario

ProSoft Technology

ProSoft Technology InRAX MVI46-PDPS Manual de usuario

ProSoft Technology

ProSoft Technology inRAx MVI56-S3964R Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario