Primera Bravo II Manual de usuario

SECTION I: SETUP

1. Check to make sure the following items are enclosed:

•Output Bin Holder

•Output Bin

•Teflon Tape Strips

•Operators Manual and

other information

2. Attaching the Output Bin

•After the software has

been updated, you will

need to attach the

Output Bin Holder

and Output Bin to the

Bravo to collect the

finished discs. Attach

the Output Bin Holder

as shown, aligning the

Locating Tabs on the

Output Bin Holder with

the Slots located on the

underside of the Bravo

allowing the holder to

hang off the edge of the

table. Notice the slots

do allow for adjusting

the position of the out-

put bin. If your discs

are not falling into the

bin, you will be able to

move the bin slightly to

align it.

•Place the Output Bin on

the Output Bin Holder

as shown.

•Your kit comes with

Teflon coated tape strips.

These may be necessary

if the discs you use do

not slide freely down

the Output Chute into

the Output Bin. Apply

the strips to the ribs of

the Chute as shown,

starting at the top of the

chute, and continuing

on down to the lower lip of the Chute to reduce friction and

cause the discs to eject properly.

SECTION II: ENABLING KIOSK MODE

Kiosk mode is available both in PrimoDVD and in the driver as a

printing option. This allows you to use the Kiosk Mode for full CD

production as well as print-only jobs.

Using Kiosk Mode in PrimoDVD

In PrimoDVD, click Robotics then Options. You will see the

following window:

Using Kiosk Mode in the Print Driver

If you are using the Bravo AutoPrinter,

or just want to print discs and have

them eject out the front of the unit, you

can enable Kiosk Mode in the driver as

well. In the Driver Settings you will see

a new option, Disc Output Location.

Simply set this to Kiosk Mode. If you

Thank you for purchasing the Kiosk Kit for the Bravo™ Disc

Publisher. This will enable your Bravo to use both the right and left

bins as input, doubling the capacity of your Bravo. This sheet

describes the installation and use of the Kiosk Kit.

Output Bin

Holder

Output Chute

Output Bin

Slots

Locating Tabs

Lower Lip of Chute

Output Chute

Ribs

Start Tape Here

Output Holder

Output Bin

Click the Enable Kiosk

Mode Check Box to use

this feature.

are creating jobs in PrimoDVD, it is not necessary to change this

driver setting if you already have set Kiosk Mode active under

Robotic Options. The PrimoDVD Kiosk Mode option overrides any

driver setting.

NOTE: In print-only jobs, you may see a Windows "Time Out" error

when the Bravo is out of discs in one bin and switches over to the other.

This is normal, and will not affect the completion of the print job. The

Bravo will retry automatically requiring no operator intervention.

Using Kiosk Mode in Discribe

Set up your job as described in

your Bravo Disc Publisher

Macintosh User's Manual. In

the Robot Write pane you will

see a check box option that will

enable Kiosk Mode.

Using Kiosk Mode in the Mac

Print Driver

If you are using the Mac Bravo

AutoPrinter, or just want to print

discs and have them eject out

the front of the unit, you can

enable Kiosk Mode in the driver

as well.

Click Print Setup to

see the driver pane

and all of its

settings. You will

want to click the

Copies and Pages

button and select

Publisher Settings

option in the drop-

down menu to

see the full pane

and access all the

printer driver settings. At the bottom of the Settings pane you

will see a check box that will enable Kiosk Mode.

Congratulations! You are now ready to use Kiosk Mode, doubling

the capacity of your Bravo Disc Publisher or Bravo AutoPrinter!

Kiosk Kit

For use with Bravo™ Disc Publisher

Operator's Instructions

012204-510710

Otros manuales para Bravo II

Este manual sirve para los siguientes modelos

Otros manuales de Accesorios de impresora de Primera

Primera

Primera AP-CODE Manual de usuario

Primera

Primera Bravo Pro Manual de usuario

Primera

Primera Impressa 3 Manual de usuario

Primera

Primera OptiVault Manual de usuario

Primera

Primera Bravo II Manual de instrucciones

Primera

Primera ADL-MAX Manual de usuario

Primera

Primera Label Stock Manual de usuario

Primera

Primera RW-12 Manual de usuario

Primera

Primera LX-REWINDER Manual de usuario

Primera

Primera Conductor Conductor Printer Manual de usuario

Primera

Primera LX400 Manual de usuario

Primera

Primera Bravo Pro Manual de usuario

Primera

Primera OptiVault Manual de usuario

Primera

Primera Ink Jet Printers Manual de usuario

Primera

Primera PN 510725-121304 Especificaciones

Primera

Primera Signature II Especificaciones

Primera

Primera OptiVault Manual de usuario

Primera

Primera Disc Autoloader ADL-MAX Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Canon

Canon Finisher-T1 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Canon

Canon TonerRobot EP-27 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Canon

Canon INNER 2-WAY TRAY-E1 Manual de operación y mantenimiento

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual