Prime Design UVX-211 Manual de usuario
PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
Toll Free: 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email: [email protected] ▪ Website: www.primedesign.net
Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
2
2
3
1
4
5
UVX-211 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CONTENTS OVERVIEW
1—Rear Rotation Assembly................................... (Qty 1)
2—Front Rotation Assembly.................................. (Qty 1)
Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
UVX-211 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
3—Rear Drive Shaft............................................... (Qty 1)
Left Hand, 50.00”
Mounting Hardware
5—Front Drive Shaft .............................................. (Qty 1)
B Version, 35.75”
4—Connecting Bar................................................. (Qty 1)
48.00”
M8 Lock Nut (8X)
M8 x 30MM (8X)
Fender Washer (8X)Neoprene Washer (8X) " Seal Washer (8X)
HKT-8163-Rotation Hardware Kit
" Flat Washer (10X)
Anti-Seize (1X)
Lubricant (1X)
Clevis Pin (1X)
Cotter Pin (1X)
M8 x 50MM (4X) ⅜" x 2.25" (2X)
1.00" Sealing
Stickers (16X)
M8 Lock Nut (5X) ⅜" Lock Nut (2X) ⅜" Flat Washer (4X)
M8 x 25MM (1X)
Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
UVX-211 ASSEMBLY INSTRUCTIONS–MOUNTING TO UTILITY BODY
M8 x 30MM Bolt
Sealing Washer
Mounting
Utility Body
Neoprene Washer
Fender Washer
M8 Locknut
Mounting Hardware (8X)
96.00”
84.00”
72.00”
96.00”
84.00”
72.00”
Rear Lower
Front Lower
3.50”3.50”
UTILITY BODY MOUNTING
6.00-8.00 Ft: Drill holes into the Service Body
mounting location according to dimensions shown.
0.1
0.4 Torque to 90 in-lbs
0.3
Using the fastening hardware shown below,
attach the vertical Uprights to the Utility Body.
The Neoprene Washer, Fender Washer, and
Locknut install from the inside of the Utility
Body in the order shown, while the Bolt and
Seal Washer install from the outside.
0.2 Position and align the vertical
Uprights until the mounting holes
realign to the body holes drilled
during Steps 0.1.
Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
3
1
2/6
4
7
5
LEFT ROTATION ASSEMBLY SEQUENCE
UVX-211 ASSEMBLY INSTRUCTIONS–LEFT SIDE ROTATION
REAR DRIVE SHAFT
1.1
1.3
1.5
Torque to 90 in-lbs
1.4
1.2
Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
6
UVX-211 ASSEMBLY INSTRUCTIONS–LEFT SIDE ROTATION
CYLINDER HARDWARE CONNECTING BAR
2.1
2.2
3.1
3.2
CONNECTING BAR FASTENERSFRONT DRIVE SHAFT
5
4.4
Torque to 90 in-lbs
4.3
4.2
4.1
Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
7
DRIVE SHAFT SEALING
Apply Silicone Sealant
to Connecting Bar ends
Adjust the Cylinder Flow
Control Screw to allow
approximately 3 seconds
time for the ladder to glide
down when operating the
loaded Ladder Rack.
6
CYLINDER ADJUSTMENT
7.1
7.2
UVX-211 ASSEMBLY INSTRUCTIONS–LEFT SIDE ROTATION
USAM-UVX211-US01 Rev-B 0618
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Prime Design
Prime Design
Prime Design FEA-0004 Manual de usuario
Prime Design
Prime Design UVX 201 Manual de usuario
Prime Design
Prime Design FBM-1061 Manual de usuario
Prime Design
Prime Design VBR 326 Manual de usuario
Prime Design
Prime Design FEA-0022 Manual de usuario
Prime Design
Prime Design AR1221 Manual de usuario
Prime Design
Prime Design CBR-0010 Manual de usuario
Prime Design
Prime Design DEPLOYPRO LOCK N GO Manual de usuario
Prime Design
Prime Design ACX Manual de usuario
Prime Design
Prime Design FBM-1009 Manual de usuario
Prime Design
Prime Design ACC-8000 Manual de usuario
Prime Design
Prime Design UXR-001-E Manual de usuario
Prime Design
Prime Design FEA-0001 Manual de usuario
Prime Design
Prime Design VRI3-FT31B Manual de usuario
Prime Design
Prime Design VRR-E-PM21 Manual de usuario
Prime Design
Prime Design VBB-FT31B Manual de usuario
Prime Design
Prime Design AR1930 Manual de usuario
Prime Design
Prime Design FEA-0015 Manual de usuario
Prime Design
Prime Design AXC Manual de usuario
Prime Design
Prime Design FBM-1019 Manual de usuario
