Prime Design DEPLOYPRO LOCK N GO Manual de usuario

DEPLOYPRO LOCK N GO

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118

Toll Free: 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

2

1

Z-Post Pair w/ Clamps (1X) Slide Assembly (1X)

M8 x 40MM (2X)

PLR-8229 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS

CONTENTS OVERVIEW

1—PLR-8229.......................................................... (Qty 1)

DeployPro Lock N Go Ladder Clamp Assembly

2—DPS 8000/8001 (shown for illustrative purposes only)

Ordered separately

* Pre-assembly required. See your DeplyPro

Assembly Instructions for proper setup before

installing the PLR-8229.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

3

PLR-8229 ASSEMBLY INSTRUCTIONS

2

DEPLOYPRO LOCK N GO LADDER CLAMP

ASSEMBLY SEQUENCE

Slide the Clamp base into the open

position as shown.

1Where applicable, remove your ladder and

straps before installing the Clamp base.

NOTE: Your ladder will be needed in

Steps 4–6 for nal adjustments.

Pull release levers on

both sides to open

NOTE: Ladder, Base/Rotation rack and mounted DPS are shown for

illustrative purposes only. Customer-specic models and setup will vary.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

4

PLR-8229 ASSEMBLY INSTRUCTIONS

USAM-PLR8229-US01 Rev-B 0619

3

Install Clamp base with the included M8 Hardware

into the DeployPro’s pre-installed Strip Nuts as shown.

Determine desired positioning on the DeployPro,

and torque to 90 in-lbs.

4Position your ladder

back onto the Deploy Pro.

Install the Z-Posts onto the

ends of the Clamp base

as shown below.

6

Using the release levers,

slide the Clamp base

together into the closed

position on the ladder.

6.1

Slide Z-Posts in until they are approximately ¼” from

the sides of the ladder, and torque the Z-Post Clamp

Nuts to 90 in-lbs.

¼” from ladder sides

NOTE: Ladder Straps will no longer be necessary,

and may be discarded.

5Finger-tighten Clamp Nuts only.

Do not trorque until Step 6.1

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Prime Design

Prime Design

Prime Design VRR-E-PM21 Manual de usuario

Prime Design

Prime Design AluRack AR-2000 Manual de usuario

Prime Design

Prime Design FBM-1024 Manual de usuario

Prime Design

Prime Design WORKPRO ASH-8034 Manual de usuario

Prime Design

Prime Design ACX Manual de usuario

Prime Design

Prime Design UXR-001-E Manual de usuario

Prime Design

Prime Design UVX 201 Manual de usuario

Prime Design

Prime Design FBM-1026-BLK Manual de usuario

Prime Design

Prime Design AR1221 Manual de usuario

Prime Design

Prime Design FEA-0004 Manual de usuario

Prime Design

Prime Design VBR 326 Manual de usuario

Prime Design

Prime Design CBR-0010 Manual de usuario

Prime Design

Prime Design AR1929 Manual de usuario

Prime Design

Prime Design ACC-8000 Manual de usuario

Prime Design

Prime Design URX-001-E Manual de usuario

Prime Design

Prime Design VRR3-FT31G-ST Manual de usuario

Prime Design

Prime Design ErgoRack VRR-FT31B Manual de usuario

Prime Design

Prime Design AR1937 Manual de usuario

Prime Design

Prime Design VRR3-GM31G-ST Manual de usuario

Prime Design

Prime Design FEA-0001 Manual de usuario

Prime Design

Prime Design FEA-0022 Manual de usuario

Prime Design

Prime Design VBB-226 Manual de usuario

Prime Design

Prime Design AXC Manual de usuario

Prime Design

Prime Design UVX-211 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario