Prestigio GEOVISION 5055 Manual de usuario

GEOVISION 5055

You may find detailed warranty information at: www.prestigio.com/support/warranty-terms.

www.prestigio.com

Unboxing

Inside your package

• Prestigio GPS

• Mounting cradle

• Car charger

• USB cable

• Quick start guide

• Warranty card

Your device at a glance

RESET

1. Power button

2. Earphone jack

3. SD card slot

4. Mini USB port

5. Reset button

6. Speaker

Inside your package

Your device at a glance

www.prestigio.com

Getting started

Install memory card

Mount your device

Charge the battery

Power on your device

Mount your device

1. Install the bracket to mounting cradle.

2. Remove the protection plastic film from

the suction cup, and position it on the clean

windshield or dashboard.

3. Hold firmly against the surface and lock the

suction cup lever. The mount will suction and

stick firmly onto the surface.

4. Lock device on the bracket with bottom on the

appropriate socket.

5. Rotate the knob to adjust device to desired

viewing angle.

Make sure that the device has a clear

view of sky to attain best GPS reception.

Congratulations on your purchase and welcome to

Prestigio. To get the most from your product and

enjoy all that Prestigio has to offer, please visit:

http://www.prestigio.com/catalogue/Navigators

For more details about your product, please visit:

www.prestigio.com/support

Install memory card

Before power on, please insert a microSD card (not

included) into the slot until it locks in place.

The device will automatically recognize

it as default storage, and save mapping

data or user’s music, photo or video on

this card.

www.prestigio.com

Install memory card

Mount your device

Charge the battery

Power on your device

• Please fully charge the battery (for

at least 8 hours) before initial use.

The battery status indicator glows in

red color when charging, and turns

bright amber color when charging is

complete.

• Charging time is approximately 2

hours after initial use.

• It is not necessary to start charging

the device before the battery is fully

discharged.

Power on your device

Press and hold the power button to turn on your

device.

To turn it off, press and hold the power

button, and and then tap power icon on

the pop-up screen.

Dismount your device

1. Push the tap on top of the mounting cradle to

release the device.

2. Lift the suction cup lever to easily remove the

suction cup from windshield or dashboard.

Charge the battery

• Using the car charger: after vehicle engine is

started, charge the device through vehicle 12V

cigarette lighter, to protect the device from

sudden surges in current.

• Using mini USB cable: connect the device to AC

adapter or the USB port of a computer.

www.prestigio.com

Maps & navigation

Program interface

Routing

Some additional features

4 Information

panel

The sign shows the upcoming

maneuver (for example, turning)

and distance to the maneuver.

Tapping on the sign opens the

menu containing route options,

for instance an option which

allows stopping route guidance.

5 Route Visualization of a current route.

6 Information

panel

The panel shows current speed,

the remaining time to the

destination point,

distance to the destination point,

and estimated arrival time.

7 GPS-cursor Indication of a current position on

the map, when the GPS receiver is

switched on.

8 Menu Tapping on the button opens the

main program menu.

9 Information

panel

The panel shows the name of

the street you are currently

driving along. The information is

available only if GPS/GLONASS

connection is established and the

map contains such information.

If there is no street name, the

direction will be displayed.

Program interface

116 13

№Name Function

1 Sound Tapping on the button opens the

sound menu.

2 Compass Tapping on the button opens the

context menu, which controls

options of map orientation

("North up" – the map will

always be oriented northwards,

"Track up" – the map will always

be oriented in the direction of

movement along the route), type

of map view (Plain view "2D",

Panoramic view "3D") and skins

("Night skin", "Day skin", "Auto").

3 Road lanes The sign displays road lanes with

possible maneuvers.

www.prestigio.com

Program interface

Routing

Some additional features

16 "Navitel.

Friends"*

The icon of the “Navitel.Friends”

service, tapping on which opens

its menu. The service is intended

for adding friends, viewing

their location and exchanging

messages with them.

10 Scale

button

Zoom out button.

11 Scale

button

Zoom in button.

12 "Navitel.

Events"*

Button for controlling the

“Navitel.Events” service.

13 Route

progress

bar

The progress bar displays the

remaining route, waypoints (if

any) and traffic density on the

route marked by color.

14 Battery The icon indicates the level of

battery charge. Tapping on the

icon shows free device memory.

15 GPS GPS-connection indicator. Grey

indicator – GPS/GLONASS-

receiver is off; red – receiver

is turned on, but there is no

connection with satellites;

yellow – bad connection; green

– connection is established. The

number in the icon indicates the

number of satellites.

www.prestigio.com

Program interface

Routing

Some additional features

21 Updates

Provides access to the program and

map update menu screen.

22 Track

recording

Button for track recording: red dot–

recording is on, grey dot – recording

is stopped.

23 Navitel.

Traffic*

The icon displays general traffic

intensity on ten-point scale. Tapping

on the button shows the menu for

controlling the “Navitel.Traffic”

service.

24 Navitel.

SMS*

The icon allows reading/sending

messages and using coordinates in

them. It also shows the number of

unread messages.

24 21

№Name Function

17 "Cursor"

button

Tapping on the button shows the

menu for operations with the

point marked on the map (making

it a destination point by pressing

"Go!" button or proceeding to the

properties screen.

18 "Save

WP"

button

Saves the point marked on the map

as a waypoint.

19 2D/3D Switching between the plain 2D and

the panoramic 3D map formats.

20 Point on

the map

Short tap on the map marks the

point for further operations with it:

saving as a waypoint, adding to the

route or viewing the object’s data,

and others.

www.prestigio.com

Program interface

Routing

Some additional features

28 "Route

through"

The button is active only when

there is an existing route. Pressing

the button marks the selected

point as a point to be included in

the route. The last added point

becomes the first one in the route

after the starting point.

29 Map Back to map.

* – functionality is available only for devices, having

access to the Internet.

26 27

№Name Function

25 "Go!" Tapping on the button gives a

command to the program to

calculate a route from the current

position or the set initial point to

the selected point.

26 "Set start" Tapping on the button determines

the selected point as a starting

point of the route (GPS-receiver

must be switched off).

27 "Set finish" The button is active only when

there is an existing route. Pressing

the button continues the route up

to the selected point making it the

destination point of the route.

www.prestigio.com

Program interface

Routing

Some additional features

Route to an address

To have a route calculated to a point of a known

address, press "Menu" in the bottom left corner of

the screen [1] → "Find" [2] → "By address", then

press "Select country" [3] and start entering the

name of a country [4]. Press the icon in the upper

right part of the screen to hide the keyboard. Select

the country [5]. "Select city", "Select street" and

"Select building" become active only if the previous

fields were filled out [6]. When all information is

entered the object will be shown in the screen [7].

Press "Go!". The program will automatically plan

a route from a current location to the indicated

address [8]. Now you can follow the route [9].

Fig.1 Fig.2

Fig.3 Fig.4

Routing

Route to a point selected on the map

You can have a route planned to a point, which

can be found and marked on the map and then set

as the destination, while current position of the

device, determined by the GPS system becomes the

starting point. To plan a route press on the map to

mark the point, select "Cursor" [1] and then "Go!"

[2]. The route will be displayed on the map [3].

Fig.1

Fig.1 Fig.2

Fig.3

www.prestigio.com

Program interface

Routing

Some additional features

the map: tap on the map to mark the point, press

"Cursor" [4] and then press "Go!" in the "My route"

screen [5]. The program will automatically plan a

route [6].

Fig.1 Fig.2

Fig.3 Fig.4

Fig.5 Fig.6

Fig.7 Fig.8

Fig.9

Manual setting of all route points

To plan a route, where the starting and the

destination points are determined manually, first

mark a point on the map where you plan to start

and press "Cursor" [1] to proceed to the "My

route" screen. Tap on the information panel at the

bottom of the screen [2]. Press "Set start" in the

"Properties" screen [3]. The GPS-receiver must be

switched off. The point will be marked on the map

as a starting point. Select a destination point on

Otros manuales para GEOVISION 5055

Tabla de contenidos

Otros manuales de GPS de Prestigio

Prestigio

Prestigio GEOVISION 5000 Manual de usuario

Prestigio

Prestigio GeoVisison 5066 Manual de usuario

Prestigio

Prestigio GEOVISION 5000 Manual de usuario

Prestigio

Prestigio GEOVISION 5059 Manual de usuario

Prestigio

Prestigio GeoVision 7790 Manual de usuario

Prestigio

Prestigio GeoVision 5055 iGO Manual de usuario

Prestigio

Prestigio GEOVISION 5066 Mireo Manual de usuario

Prestigio

Prestigio GV5055 Manual de usuario

Prestigio

Prestigio GV4300 Manual de usuario

Prestigio

Prestigio GEOVISION 5055 Manual de usuario

Prestigio

Prestigio GEOVISION 150 Manual de usuario

Prestigio

Prestigio GeoVision 430 Manual de usuario

Prestigio

Prestigio GEOVISION 7795 Manual de usuario

Prestigio

Prestigio GV7059 Manual de usuario

Prestigio

Prestigio GV7777 Manual de usuario

Prestigio

Prestigio GeoVisison 5066 Manual de usuario

Prestigio

Prestigio GeoVision 5056 Navitel Manual de usuario

Prestigio

Prestigio GV4500 Manual de usuario

Prestigio

Prestigio GeoVision 5300 Manual de usuario

Prestigio

Prestigio GeoVision 5500 Manual de usuario

Prestigio

Prestigio GeoVision 4700-5700 Manual de usuario

Prestigio

Prestigio Geovision Tour 3 Sygic Manual de usuario

Prestigio

Prestigio Qstarz BT-Q816 Manual de usuario

Prestigio

Prestigio GV5050 Manual de usuario

Manuales populares de GPS de otras marcas

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Manual de usuario

Garmin

Garmin SOUNDER 125 Manual de usuario

Garmin

Garmin DEZL 580 Manual de usuario

Jigabot

Jigabot EX Manual de usuario

Pointer

Pointer Cellocator CelloTrack XT LTE Guía de instalación

Queclink

Queclink GV55LITE Manual de usuario

Voxson

Voxson Voxtrack GPS500 Manual de instrucciones

Garmin

Garmin ECHOMAP PLUS Manual de usuario

Starcom Systems

Starcom Systems Kylos Compact Manual de usuario

Garmin

Garmin 15 H Series Manual de usuario

Cobra

Cobra Marine MC 600Ci Manual de usuario

Cellocator

Cellocator CelloTrack T Manual de usuario

Enfora

Enfora Mini-MT GSM2228UG001 Manual de usuario

Magellan

Magellan eXplorist 100 Manual de usuario

LTE

LTE G50B Manual de usuario

Garmin

Garmin DEZL OTR500 Manual de usuario

SkyGolf

SkyGolf SkyCaddie SG1 Manual de usuario