Prestigio GV7777 Manual de usuario
EN-1
CAUTION
1. To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel. Unplug the
product from the wall outlet before servicing or when it is unused for a long period of
time.
2. The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
3. Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
WARNING
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
Important Safety
Instructions
EN
EN-2
Accessories List
ITEM NAME QTY
Car Charger 1
Mounting Cradle 1
USB Cable 1
AC charger 1
OTG Cable 1
Stylish Carrying case 1
CD 1
User Manual 1
Warranty Card 1
Accessories
EN
EN-3
Powe
r
Turn on/off the device; Suspend/Activate the
device
V
ol +
\
V
ol - Button Adjust the volume level.
Built-in Microphone Record sounds.
Earphone Jack Earphones connection.
Micro SD Card Slot Insert Micro SD card.
HDMI HDMI cable connection
USB port USB connection
DC port AC adapter connection
Front Camera Take photos or video chat
Speaker Emit sound, voice or music
Rear Camera Take photos.
10
9
8
7
6
5
4
3
1
View of Main Unit
EN
1
2
10
5
6
3
4
7
11
8
9
2
11
EN-4
NOTE:
Please always make sure that the device and any other external device
connected to the device are powered off and unplugged from the power
supply before attempting to connect the device to any external device.
Inserting microSD Card
zTo insert a microSD card, place connector towards device and card
label towards the front side of the device.
zTo remove a microSD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Charging
1. Connecting to External USB Device
zFlip open the protective rubber cover towards the front of the device.
zInsert USB connector into the appropriate USB port.
zInsert the other USB connector into USB port on PC to start charging.
Device Connection
EN
EN-5
2. Connecting to Car Charger
zFlip open the protective rubber cover towards the left side of the device.
zInsert USB connector into the appropriate USB port.
zInsert car charger connector into vehicle 12V accessory/cigarette socket to start
charging.
NOTE:
Please connect the car charger to
vehicle 12V accessory/cigarette
socket after vehicle engine is started
to protect the device from sudden
surges in current.
Connecting to Earphones
zFlip open the protective rubber cover towards the front of the device.
zInsert earphone plug (not included) into the appropriate earphone port to switch
audio output from device speaker to earphone.
NOTE:
Excessively loud volume is potentially detrimental to hearing. Please turn
down the volume before connecting the earphone and gradually turn up
the volume to a comfortable level.
Device Connection
EN
EN-6
About Rechargeable Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the
battery (for at least 8 hours) before initial use. The battery status indicator glows in red
color when charging and turns bright amber color when charging is complete. Charging
time is approximately 2 hours.
Working conditions and precautions for the rechargeable battery
zDevice with new batteries should be fully charged before initial use.
zBattery should only be used and charged when temperatures are between 0°~
37°C.
zIt is not necessary to start charging the device before the battery is fully discharged.
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after vehicle engine is started to protect the device from sudden
surges in current.
Cautions on Battery
Char
g
in
g
EN
EN-7
NOTE:
zDo not operate the device while driving.
zPlease select an appropriate location on the dashboard or
windshield where the device will not obstruct driver field of vision.
Device Mounting Procedures
The device can be securely mounted on vehicle dashboard or windshield with the
mounting cradle included. Please follow procedures below to operate mounting cradle:
1. Select an appropriate location on windshield or dashboard where the device and
mounting cradle will not obstruct driver field of vision.
2. Please also make sure that the device has a clear view of sky to attain best GPS
reception.
zPlace device on the bracket with bottom positioned on the
appropriate socket.
zPush on the top edge to securely install device onto the cradle.
zLift the suction cup lever and press the suction cup at desired
location.
zPress down the suction cup lever to secure the mounting cradle on
the surface.
zRotate the knob to adjust device to desired viewing angle.
To Dismount Device
1. Push the tap on top of the mounting cradle to release the device.
2. Lift the suction cup lever to easily remove the suction cup from windshield or
dashboard.
Using Mounting
Cradle
EN
EN-8
zIn the Home menu press the icon and select Settings icon to access the list of
options. Select Wireless & networks.
zIf the Wi-Fi is off, tap on the Wi-Fi line to turn it on.
zThe device will scan for available Wi-Fi networks and display them at the right of
the screen.
zTap on the network you want to connect to. Then tap inside the Wireless password
field to make the virtual keyboard appear. Enter the required network information,
tap on Enter, and then tap on Connect.
zYour device will now attempt to establish a connection to the Wi-Fi access point
with the network parameters you entered.
1. Press and hold Power Button to turn on device.
2. Shortly after the greeting screen is shown, the main menu will be
displayed.
3. Tap the corresponding buttons with touch pen included to navigate various
functions.
4. Press and hold Power Button to turn off the device or to allow device to
enter sleep mode.
Connecting to WiFi
Getting Started
EN
EN-9
No. Name Function
1 Information
panel
A sign of the upcoming manoeuvre. There are various turns,
distance to the next maneuver in metres or kilometres, etc. on a
gray background. Clicking on the sign stops the route guidance
and more route options.
2 Compass
Context menu opens by pressing this button. In this menu
switches the orientation of the map («North up» - lock icon is
next to the compass, «Rotate in accordance with the
movement» - route is next to the compass), the type of card
(Flat view «2D» and the Panoramic view of the «3D»)
and the skins («Night», «Day», «Auto»). When driving the
compass always points to the North.
3 Sound Sound menu opens by pressing this button
4 Information
panel
The estimated total time in a way, the total length of the route,
time of arrival at the final point of the route.The active
5 Route The active route.
6 Navitel. Events Event management button.
7 GPS-cursor Your location indicator.
8 Menu Main menu opens by pressing this button.
Program interface
EN
EN-10
No. Name Function
9
Information
panel
Shows the name of the street you are currently driving along.
Available only if GPS/GLONASS connection is established. If
there is no street name, the direction will be shown.
10 2D/3D Switches 2D/3D format.
11 Traffic lane Displays the traffic lanes with a valid maneuvers at the next
intersection.
12 Scale button Zoom out.
13 Scale button Zoom in.
14 Information
panel Following street.
15 Battery Icon shows the level of battery charge. Press it to see the
remaining memory.
16 GPS
GPS/GLONASS connection icon. If the indicator is grey —
receiver is disabled, red — switched
on, but the connection is not established, yellow - poor
connestion, green - connection
established. There is a number of the satellites in the dot.
Program interface
EN
Tabla de contenidos
Otros manuales de GPS de Prestigio
Prestigio
Prestigio GEOVISION 5055 Manual de usuario
Prestigio
Prestigio GeoVision 5500 Manual de usuario
Prestigio
Prestigio GV5050 Manual de usuario
Prestigio
Prestigio GV4500 Manual de usuario
Prestigio
Prestigio GV5069 Manual de usuario
Prestigio
Prestigio GeoVision 7790 Manual de usuario
Prestigio
Prestigio GEOVISION 5066 Mireo Manual de usuario
Prestigio
Prestigio GeoVision 5055 iGO Manual de usuario
Prestigio
Prestigio GEOVISION 5000 Manual de usuario
Prestigio
Prestigio GV5055 Manual de usuario
Prestigio
Prestigio GeoVision 5500 Manual de usuario
Prestigio
Prestigio GEOVISION 150 Manual de usuario
Prestigio
Prestigio GV4700BT Manual de usuario
Prestigio
Prestigio GEOVISION 5000 Manual de usuario
Prestigio
Prestigio GV7790 Manual de usuario
Prestigio
Prestigio GV4300 Manual de usuario
Prestigio
Prestigio GeoVision 5056 Navitel Manual de usuario
Prestigio
Prestigio GEOVISION 5059 Manual de usuario
Prestigio
Prestigio Geovision Tour 3 Sygic Manual de usuario
Prestigio
Prestigio GeoVisison 5066 Manual de usuario
