Polygroup TG76P4724D03 Manual de usuario

MODEL #: TG76P4724D03

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set® and Simple ShapeTM technology-Set up

and light up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into the

assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Just plug the adapter (connecting with the tree power cord) into the wall outlet (See Fig. B), your entire tree should now be lit. If

some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in

order to maintain the performance and life expectancy of your pre-lit tree. * The lights will remain lit even if one bulb burns out.

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

NEED HELP?

Fig. B - Tree and Light Assembly *Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V, 60Hz, 0.25A

Output: 29V DC 0.45A

Section 2

Tree top

Section 1

Control box

Insert Green

Label Extension

Cord into Adapter

Do Not Tamper

Internal Parts

Open the

protective

cap

Do Not Tamper

Internal Parts

Open the

protective

cap

Fig. A - Tree Stand Assembly

Click

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

Plug Adapter

Into Wall

Outlet

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and adapter is plugged into the wall outlet.

2.Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

4. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and

secure using the retainer washer. (See Fig. E)

1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section below and fold

all branches toward the pole until the bottom section is removed from the tree stand.

Cover the protective cap on the poles to avoid damaging the internal parts. (See Fig. D)

4. Carefully place all tree sections into shipping box and tape it shut.

5.When not in use, please store your tree in a cool, dry place away from sunlight.

Exposing your tree toexcessive heat or humidity may damage your tree.

6. Keep out of reach of pets and children.

Fig. E

Fig. D

STORAGE INSTRUCTIONS

TROUBLESHOOTING TIPS

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included. If extra parts are needed, please contact

our customer service center.

SPARE PARTS

9. This is a Simple ShapeTM tree. Just slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps.Your Christmas

tree is now complete and ready to be decorated.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one

to the right, one to the left and one at the center of the main stem. (see Fig.C)

Press the selector button on the “Dual Color Light Controller” or

“Remote Controller” to select among: (1) CLEAR - MULTI: FADING

(2) CLEAR: FADING (3) CLEAR - MULTI: ALTERNATING

(4) CLEAR: STEADY (5) CLEAR - MULTI: SLOW FADING

(6) MULTI: STEADY (7) MULTI: FADING (8) COMBINATION

DUAL COLOR LIGHT CONTROLLER INSTRUCTIONS:

Light

Controller

Selector

Button

Remote

Controller

Insulation Tab

REMOTE CONTROL INSTRUCTIONS

1. Remove the insultation tab.

2. Press the button to select from different light functions (see DUAL COLOR LIGHT CONTROLLER INSTRUCTIONS).

2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed

with the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Cover

Battery

CR2032

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

WARNING

1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).

3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.

Ingestion of such batteries has been known to cause death.

4. This product contains a lithium battery which if swallowed has been known to cause death.

5. Do not expose light set to moisture.

6. Remove batteries when not used for an extended period of time, or when depleted.

7. Clean the battery contacts prior to battery installation.

8. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed.

9. Dispose of used batteries properly by following directions on batteries.

10. Use only CR2032 batteries for the remote controller.

11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

When using electrical products, basic precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

a) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor

applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified

electrician for proper installation.

b) This seasonal use product is not intended for permanent installation or use.

c) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

e) Do not let lamps rest on the supply cord or on any wire.

f) Unplug the product when leaving the house, or when retiring for the night, or if left unattended.

g) This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with

or placed where small children can reach it.

h) Do not use this product for other than its intended use.

i) Do not hang ornaments or other objects from cord, wire, or light string.

j) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

k) Do not cover the product with cloth, paper or any material not part of the product when in use.

l ) This product is equipped with push-in type lamps. Do not twist lamps.

m) Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

Step 1

Grasp the power adapter or power cord plug, and than unplug from the power outlet. Do not pull the power cord.

LAMP REPLACEMENT

Step 2

Lift up lamp lock tab, then

pull the lamp and plastic lamp base

straight out of the lamp-holder.

Step 3

Replace with a new spare

lamp provided with this product.

(Reference figure only)

CAUTION:

1.To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product;

b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or

electrical shock hazards.

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any replacement parts, troubleshooting, or if there are any questions or concerns about this product, please call

us at 1-888-919-0070 or visit www.polygroupstore.com and a customer representative will be happy to assist you.

To speak with a MM Customer Service Representative, please call 1-888-301-0332 (toll-free).

We are so confident you will be delighted with your Member’s Mark purchase that we promise to refund or replace any

item you find unsatisfactory.We aim to delight all our members and would

love to hear about your discoveries! Call us at:

1-888-301-0332 (toll-free), 8am – 5pm CST Monday – Friday

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Questions or Comments?

We would love to hear about your

Member’s Mark experience! Visit us at:

samsclub.com/membersmarkhelp

Otros manuales de Pino artificial de Polygroup

Polygroup

Polygroup TGC0P3499C16 Manual de usuario

Polygroup

Polygroup TG50M2AKML00 Manual de usuario

Polygroup

Polygroup TG76M3AE4L03 Manual de usuario

Polygroup

Polygroup AR-P18002 Manual de usuario

Polygroup

Polygroup TG76P4751P01 Manual de usuario

Polygroup

Polygroup TG70M3AV2C00 Manual de usuario

Polygroup

Polygroup TG76M3AE4C00 Manual de usuario

Polygroup

Polygroup TG76M4C92C00 Manual de usuario

Polygroup

Polygroup TG66GY039D00 Manual de usuario

Polygroup

Polygroup Corona TG50ON041P00 Manual de usuario

Polygroup

Polygroup TV70M5417C01 Manual de usuario

Polygroup

Polygroup TG76P6059D02 Manual de usuario

Polygroup

Polygroup TG76M3P51C01 Manual de usuario

Polygroup

Polygroup Evergreen Classics TG76P4A73D06 Manual de usuario

Polygroup

Polygroup TV46M4H56C07 Manual de usuario

Polygroup

Polygroup TG76M4244L03 Manual de usuario

Polygroup

Polygroup TG90P4386C01 Manual de usuario

Polygroup

Polygroup SCP112781A Manual de usuario

Polygroup

Polygroup FL18 Manual de usuario

Polygroup

Polygroup TV50M4G26C01 Manual de usuario

Polygroup

Polygroup TG70M4D84C03 Manual de usuario

Polygroup

Polygroup Alexander Manual de usuario

Polygroup

Polygroup TG70P3D88L14 Manual de usuario

Polygroup

Polygroup TG76P3944D07 Manual de usuario

Manuales populares de Pino artificial de otras marcas

Trim a Home

Trim a Home TY-S6-250L Manual de usuario

Sears

Sears Donner & Blitzen M44814 Manual de usuario

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manual de usuario

Costway

Costway CM23595US Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manual de usuario

Holiday Living

Holiday Living TV40EH339C01 Manual de usuario

CASARIA

CASARIA DBGB001 Manual de usuario

Alpine

Alpine CRD100L-WT Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manual de usuario

CASARIA

CASARIA 104006 Manual de usuario

Alpine

Alpine CRD111S-GN Manual de usuario

Home Accents Holiday

Home Accents Holiday 1001540584 Manual de usuario

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manual de usuario

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manual de usuario

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday 1004363936 Manual de usuario

Polytree

Polytree TG66EH148C17 Manual de usuario