Planet SOHOConnect DHD-801 Manual de usuario
DHD-801/1601 User’s Guide
Table of Contents i
SOHOConnect Series
DHD-801
DHD-1601
Dual-Speed Hub
SOHOConnect Series
ii Table of Con-
tents
Trademarks
Copyright PLANET Technology Corp. 1999.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp. The information in this manual is subject to change
without notice. All other trademarks belong to their respective
owners.
FCC Warning
This equipment has been tested and found to comply with
the regulations for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with this user’s guide, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the
user may be required to take adequate measures.
Revision
The information in this manual is subject to change without notice.
User's manual for PLANET SOHOConnect Series,
DHD-801 / DHD-1601
Rev 1.0 (March. 1999)
Part No. EM-DHD8/16
DHD-801/1601 User’s Guide
Table of Contents
iii
TABLE OF CONTENTS
0ABOUT THIS GUIDE.................................................V
Conventions .........................................................................v
Overview of the User’s Guide ..............................................v
1INTRODUCTION .......................................................1
Product Description............................................................ 1
Product Features ................................................................ 2
2UNPACKING AND SETUP..........................................3
Unpacking........................................................................... 3
Identifying External Components...................................... 3
Front Panel........................................................................... 4
Rear Panel ............................................................................ 5
Installing the Hub .............................................................. 5
Installation........................................................................... 5
Connecting the Power Adapter .......................................... 6
3UNDERSTANDING INDICATORS .................................7
Hub State Indicators.......................................................... 7
Port State Indicators .......................................................... 8
SOHOConnect Series
iv Table of Con-
tents
4MAKING CONNECTIONS...........................................9
Connectivity Rules.............................................................. 9
Hub-to-end-node Connections.......................................... 10
Uplink Connection............................................................ 12
5CABLES AND CONNECTORS...................................15
100BASE-TX Fast Ethernet Cables and Connectors...... 15
Crossover Cables............................................................... 16
6SPECIFICATIONS...................................................17
General.............................................................................. 17
LED Indicators................................................................. 18
Environmental and Physical ........................................... 18
DHD-801/1601 User’s Guide
About this Guide
v
0 ABOUT THIS GUIDE
This guide discusses how to install and use your DHD-801/
DHD-1601, the 8/16-port 10/100Mbps Dual speed Hub.
Conventions
As used in this guide, the term hub, unless otherwise
noted, refers to the DHD-801 or DHD-1601, the dual speed
hub.
Overview of the User’s Guide
♦Chapter 1, Introduction. Provides information on
Fast Ethernet networks and introduces your hub’s
features.
♦Chapter 2, Unpacking and Setup. Helps you get
started in setting up the hub.
♦Chapter 3, Understanding Indicators. Describes
all LED indicators on the hub’s front panel.
Understanding these indicators is essential to
effectively using the hub.
♦Chapter 4, Making Connections. Provides
information on connecting to the hub’s twisted-
pair ports and uplinking hubs together.
♦Appendix A, Cables and Connectors. Provides
specifications on the cables and connectors used
with the hub.
♦Appendix B, Specifications. Lists the hub’s
specifications.
SOHOConnect Series
About this Guide
vi
This page intentionally left blank!
DHD-801/1601 User’s Guide
Introduction
1
1
1 INTRODUCTION
This chapter introduces your hub and gives some
background information about the technology of the hub
uses.
Product Description
DHD-801/1601 is designed to allow easy integration and
migration between 10Mbps Ethernet and 100Mbps Fast
Ethernet.
The hub can operate with both IEEE 802.3 10BASE-T
connections and IEEE 802.3u 100BASE-TX connections.
All of the twisted-pair ports support NWay auto-
negotiation, allowing the hub to automatically detect the
speed of a network connection. This means you can connect
all of your Ethernet and Fast Ethernet hosts to your hub
without any rewiring required when a host is upgraded
from 10 Mbps to 100 Mbps.
This Hub with built-in switch function allows
communication between network end nodes operating at
different speeds.
Because it conforms to the standards for both Ethernet and
Fast Ethernet Class II repeaters, your hub can also be
“Uplinked”together with a similarly conformant hub to
SOHOConnect Series
Introduction
2
expand the network still further. The uplink connection
will carry both 10Mbps and 100Mbps network signals.
Product Features
The list below highlights your hub’s features and
specifications:
♦Compatible with the IEEE 802.3 10BASE-T Ethernet
and 802.3u 100BASE-TX Fast Ethernet industry
standards for interoperability with other Ethernet
and Fast Ethernet network devices.
♦Ethernet connections support Category 3 or better
twisted-pair cables.
♦Fast Ethernet connections support both shielded
twisted-pair and Category 5 unshielded twisted-pair
cables.
♦Fast Ethernet connections support a maximum
distance of 100 meters from end-station to hub, and a
total network diameter of 205 meters.
♦Eight/Sixteen 10/100Mbps NWay ports per hub for
connecting stations to the network.
♦Hubs with built-in switch function automatically
transfer packets between 10Mbps Ethernet and
100Mbps Fast Ethernet connections, allowing
communication between end nodes operating at
different speeds.
♦LED indicators for power, 10-Mbps collision (DHD-
1601), 100-Mbps collision, connection speed per port,
and port status per port.
♦Uplink jack for easy linking of two hubs to further
expands the network.
♦External AC power adapter.
DHD-801/1601 User’s Guide
Unpacking and Setup
3
2
2 UNPACKING AND
SETUP
This chapter provides information on the unpacking and
initial installation of your hub.
Unpacking
Open the shipping cartons of your hub and carefully
unpacks the contents. The carton should contain the
following items:
♦One 10/100Mbps Dual speed Hub
♦One AC power adapter, suitable for your area’s
electrical power connections
♦Accessory pack
♦This User’s Guide
If any item is damaged or missing, report the problem
immediately to your network equipment dealer.
Identifying External Compo-
nents
This section identifies all the major external components of
the hub. Both the front and rear panels are shown,
SOHOConnect Series
Unpacking and Setup
4
followed by a description of each panel feature. The
indicator panel is described in detail in the next chapter.
Front Panel
The figure below shows the front panels of the hubs.
8/16-port 10/100Mbps Dual speed Hub
♦LED Indicator Panel
Refer to the next chapter, Understanding Indicators, for
detailed information about each of the hub’s LED
indicators.
♦Port (MDI-X) Jacks
Use these jacks to connect stations to the hub. These are
numbered jacks, or called MDI-X (Medium-Dependent
Interface, Cross-wired) jacks, which mean, you can use
ordinary straight-through twisted-pair cables to connect
user machines and servers to the hub through them. If
you need to connect another device with an MDI-X jack,
such as another hub or an Ethernet switch, you should
use a crossover cable, or make the connection using the
MDI-X jack (described below). For more information
about crossover connections.
♦Uplink Jack (MDI-II)
Use this jack to connect another hub to the hub. This is
MDI-II (Medium-dependent Interface, straight-wired)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Planet
Planet
Planet GS-6320 Series Manual de usuario
Planet
Planet IKVM-1000 Manual de usuario
Planet
Planet POE-1200 Manual de usuario
Planet
Planet FNSW-2402S Manual de usuario
Planet
Planet IGS-4215-4P4Tv2 Manual de usuario
Planet
Planet IPOE-470 Manual de usuario
Planet
Planet WGS-6325-8UP2X Manual de usuario
Planet
Planet IGS-10020PT Manual de usuario
Planet
Planet WSD-800 Manual de usuario
Planet
Planet FGSW-4840S Manual de usuario
Planet
Planet FNSW-1601 Manual de usuario
Planet
Planet FSD-504PE Manual de usuario
Planet
Planet FSD-604HP Manual de usuario
Planet
Planet ISW-504PT Manual de usuario
Planet
Planet GS-4210-8P2T2S Manual de usuario
Planet
Planet SW-502 Manual de usuario
Planet
Planet SGSW-24040 Manual de usuario
Planet
Planet DH-1600 Manual de usuario
Planet
Planet CV-119/P2000 Manual de usuario
Planet
Planet WGSW-52040 Manual de usuario
