Planet KVM-200 Manual de usuario

TABLE OF CONTENTS

Chapter 1 Introduction .......................................3

1.1 Features.........................................................3

1.2 Package Contents..........................................4

1.3 Technical Specifications.................................4

Chapter 2 Installation .........................................5

2.1 System Requirements Specifications.............5

2.2 Product Details...............................................5

2.3 Hardware Installation.....................................7

Chapter 3 Operation ...........................................9

3.1 Select PC through push buttons ..................10

3.2 Select PC through Hot key...........................10

Chapter 4 Troubleshooting..............................12

Chapter 1

Introduction

Thank you for purchasing PLANET KVM switch. PLANET

KVM switch can save your MONEY, TIME, SPACE,

EQUIPMENT and POWER.

Control multiple PCs from one keyboard, mouse and VGA

monitor. PLANET KVM switch is loaded with features such

as hot-key, front panel push button and auto scan control. It

has complete keyboard and mouse emulation for

simultaneous PCs boot-up process.

1.1 Features

 2/4-port KVM switch is compact size design and portable

 Support Microsoft Intellimouse, Logitech Net Mouse, etc...

 Support DOS, Win3.x, Win95/98/98SE/2000/ME/XP,

WinNT, Netware, Unix, Linux

 Support iMAC, Power MAC and Sun Microsystems with

USB port (Need to work with USB-PS2 adapter)

 Hot Plug - Add or remove connected PCs for maintenance

without powering down the KVM switch or PCs

 Very High Video Quality - Up To 1920X1440, Bandwidth:

200MHz

 No Software Required - easy PC selection via Push

Buttons, Hot Keys

 Auto Scan Mode for monitoring PCs

 Keyboard status restored when switching PCs

 LED Display for easy status monitoring

 Buzzer sound for switching port confirmation

1.2 Package Contents

KVM-200 KVM-400

♦ 2-port KVM switch

♦ User’s manual

♦ 4-port KVM switch

♦ User’s manual

1.3 Technical Specifications

Model KVM - 200 KVM - 400

PC Port 2 4

Console Port 1 1

MAX PC

Connections 2 4

LED 2 8

PC Port

Connector

(All Female Type)

PS/2 Keyboard mini-Din 6 pin

PS/2 Mouse Mini-Din 6 pin

VGA HDDB 15pin

Console port

connector

(All Female Type)

PS/2 Keyboard mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

PC selection Hot Key / Button

Scan Intervals 8sec.

Keyboard

Emulation PS/2

Mouse Emulation

(Console port to

PC port)

PS/2

VGA Resolution Up to 1920X1440

Bandwidth 200MHz

Operating

Temperature 0 ~ 40 Degree C (32 ~ 104 Degree F)

Storage

Temperature -20 ~ 60 Degree C (-4 ~ 140 Degree F)

Humidity 0 ~ 80% RH, non-condensing

Weight (g) 440 720

Dimension (mm) 125X72X45 200X90x45

Chapter 2

Installation

2.1 System Requirements Specifications

Model KVM-200 KVM-400

VGA Monitor 1 1

PS/2 Keyboard 1 1

Console

side PS/2 Mouse 1 1

HDB-15 pin male to

male VGA cables 2 4

PS/2 cable male to

male for Keyboard 2 4

Computer

side

PS/2 cable male to

male for Mouse 2 4

Optional USB-PS2 adapter is required if connect to

computer with only USB keyboard/mouse

interface.

2.2 Product Details

Front panel & Rear panel of KVM-200:

Computer power

on/off status

Select

Power

KVM-200

2-Port KVM Switch

Connect to mouse PC selection

Connect to keyboard

Connect to computer’sVGA port

Monitor

Optional power adapter

Connector to computer’sPS/2 keyboard/mouse port

Front panel & Rear panel ofKVM-400:

Computer is selected

KVM-400

4-Port KVM Switch

Select

Power

On Line

1234

Reset

DC9V

Option

3 2 14

DC 9

Option

2 1

Reset the KVM switch

2.3 Hardware Installation

Before installation, please make sure all of peripherals and

computers have been turned off.

Step 1 Connecting Monitor to the KVM switch

Connect a VGA cable (15-pin HDDB Male / Male) with the

Male side to both of the Monitor and the rear panel of the KVM

switch unit.

Step 2 Connecting Keyboard & Mouse to the

KVM switch

Connect the keyboard and mouse to the KVM switch. If you

have an AT type keyboard, you will need an AT to PS/2

adapter.

Note: Only use PS/2’s keyboard and mouse.

Step 3 Connecting VGA port of PC(s) to the KVM

switch

Now the PC connections will be made with the monitor (VGA)

connections first. Connect a VGA cable (15-pin HDDB Male /

Male) with the Male side to both of the PC’s VGA output and

the rear panel of the KVM switch unit to the connector labeled

VGA. Repeat this for all PCs.

Step 4 Connecting keyboard and mouse port of

PC(s) to the KVM switch

Connect keyboard and mouse port of your PC to the rear panel

of the KVM switch.

Step 5 Double-check all of the connections

Please check step1 ~ step4 again and then power on the

computers.

Note: Please do not switch the PC port (i.e. Do not press

the push button of KVM switch or run hot key) during the

computers are under boot-up process.

This page intentionally left blank!

Chapter 3

Operation

3.1 Select PC through push buttons

KVM-200 / KVM-400 has separate push buttons on the

panel. Press each button to select respective PC port.

KVM-400 has also On Line LED for each PCs. When you

select one of four PCs and it is powered on, the selected

port On Line LED is lit. When you select one of four PCs

and it is shut down or disconnected from a PC, the selected

port ON Line LED flashed.

3.2 Select PC through Hot key

You can also conveniently command PLANET KVM to

switch ports through simple key sequences. To send

commands to PLANET KVM, The SCROLL LOCK key must

be pressed twice within 2 seconds. You will hear a beep for

confirmation.

Below are the different commands:

Previous Channel

Next Channel

Auto Scan

Scroll

Lock Scroll

Lock

Scroll

Lock Scroll

Lock

Scroll

Lock

Scroll

Lock

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Planet

Planet

Planet FSD-504PE Manual de usuario

Planet

Planet FSD-804P Manual de usuario

Planet

Planet IGS-824UPT Manual de usuario

Planet

Planet IGS-5225-4T2S Manual de usuario

Planet

Planet FSD-804PS Manual de usuario

Planet

Planet FGSW-2402RS Manual de usuario

Planet

Planet IGS-20160HPT Manual de usuario

Planet

Planet IGS-10020MT Manual de usuario

Planet

Planet WGSW-20160HP Manual de usuario

Planet

Planet GSW-601S Manual de usuario

Planet

Planet WGS-804HPT Manual de usuario

Planet

Planet IGS-10020HPT-U Manual de usuario

Planet

Planet IGS-6325-8T4X Manual de usuario

Planet

Planet POE-151 Manual de usuario

Planet

Planet POE-1200 Manual de usuario

Planet

Planet IGS-5227X-4P2T Manual de usuario

Planet

Planet GS-5220-16P2XV Manual del operador

Planet

Planet WSD-800 Manual de usuario

Planet

Planet IFGS-1022HPT Manual de usuario

Planet

Planet GSD-1002M Manual de usuario

Planet

Planet FSD-1020 Manual de usuario

Planet

Planet FNSW-2402S Manual de usuario

Planet

Planet IGSW-24040T Manual de usuario

Planet

Planet XGSW-28040 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario