Planet NOVASwitch Series Manual de usuario

Este manual sirve para los siguientes modelos

3

Tabla de contenidos

Otros manuales de Cambiar de Planet

Planet

Planet XGS-6350-48X2Q4C Manual de usuario

Planet

Planet FGSW-2401 Manual de usuario

Planet

Planet FNSW-1601 Manual de usuario

Planet

Planet IKVM-8000 Manual de usuario

Planet

Planet GSW-1602SF Manual de usuario

Planet

Planet MGSW-004 Manual de usuario

Planet

Planet WGSW-20160HP Manual de usuario

Planet

Planet WGSW-24000 Manual de usuario

Planet

Planet POE-151 Manual de usuario

Planet

Planet IGS-6325-20T4C4X Manual de usuario

Planet

Planet IGS-10020PT Manual de usuario

Planet

Planet ISW-511 Series Manual de usuario

Planet

Planet FSD-808P Manual de usuario

Planet

Planet GSD-1008HP Manual de usuario

Planet

Planet KVM-1600 Manual de usuario

Planet

Planet IGS-504HPT Manual de usuario

Planet

Planet GSD-800S Manual de usuario

Planet

Planet WGSW-24040 Manual de usuario

Planet

Planet POE-1200G Manual de usuario

Planet

Planet FSD-1604 Manual de usuario

Planet

Planet SGSD-1022 Manual de usuario

Planet

Planet IGS-5225 Series Manual de usuario

Planet

Planet WGS-4215 Series Manual de usuario

Planet

Planet SGS-6341-24T4X Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

0

10/100Mbps Switch

FNSW-800

Modules

FNSW-001ST / FNSW-001SC

Quick Installation Guide

1

FCC Warning

These devices have been tested and found to comply with

the limits for a class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interface when the equipment is

operated in a commercial environment. This equipment

generates, uses an can radiate radio frequency energy and, if

not installed and used properly may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct

the interference at the user’s own expense.

Revision

This installation guide is used for PLANET NOVASwitch

series-

Model: FNSW-001ST, FNSW-001SC

Revision: 1.0 (October, 1998)

Part No.: EMQ-FNSW001

Copyright © 1998 Planet Technology Corp.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology

Corp. The information in this manual is subject to change

without notice. All other trademarks belong to their respective

owners.

2

Part One: Outlooks, Check List & Features

Outlooks

Extension module for FNSW-800

FDXHDX

FDXHDX

ST /SC Interface

FNSW-001ST/FNSW-001SC:

1-port 100Base-FX switch extension module

Check List

Modules:

♦The Module

♦This Installation Guide

3

Part Two: Installation

Installation

1. Cabling Guidelines

♦Maximum length of a multi-mode fiber cable (62.5/

125µm) is:

2 kilometers (6560 feet) for full-duplex, or

412 meters (1351 feet) for half-duplex 100Base-FX

after module installed

2. Power off the FNSW-800 and remove the unit from the 19-

inch rack.

3. Release the two screws to remove the module cover. Make

sure the last port (port#8) is free

4. Slide in the module follows the chutes firmly. Secure the two

screws.

Extension Slot

Full-Duplex

Half-Duplex

5. Put back the switch.

6. Make the connection follow the cabling guidelines above.

Note, please check the mode (Full/Half-Duplex) of the

device that is going to attached to and set the DIP switch.

7. Power on the unit and the connected devices, the LED

indicators of port#8 will blink follow the user's guide of

FNSW-800, section "LED Indications".