Planet IGT-1205AT Manual de usuario

Industrial 10/100/1000Base-T to

2 100/1000Base-X SFP Media Converter

IGT-1205AT

User's Manual

Trademarks

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All

other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work

properly in all environments and applications, and makes no warranty

and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions

that may have occurred.

Information in this User’s Manual is subject to change without notice

and does not represent a commitment on the part of PLANET. PLANET

assumes no responsibility for any inaccuracies that may be contained in

this User’s Manual. PLANET makes no commitment to update or keep

current the information in this User’s Manual, and reserves the right

to make improvements to this User’s Manual and/or to the products

described in this User’s Manual, at any time without notice.

If you nd information in this manual incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to

take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human

health as a result of the presence of hazardous substances in

electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of

the crossed-out wheeled bin symbol. Do not dispose of WEEE as

unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET Industrial 10/100/1000Base-T to 2 100/1000Base-X SFP Media

Converter User's Manual

For Model: IGT-1205AT

Revision: 1.0 (APRIL, 2013)

Part No: EM-IGT_1205AT_v1.0 (2350-AH1210-000)

Table of Contents

1. Introduction............................................................................... 5

1.1 Package Contents................................................................ 5

1.2 How to Use This Manual ...................................................... 5

1.3 Product Features ................................................................. 6

1.4 Product Specications .......................................................... 7

1.5 Physical Dimensions ............................................................ 9

2. Installation ...............................................................................10

2.1 Product Description ............................................................10

2.1.1 Converter Front Panel ...............................................12

2.1.2 LED Indicators..........................................................13

2.1.3 Converter Upper Panel ..............................................14

2.1.4 Wiring the Power Inputs............................................15

2.1.5 Wiring the Fault Alarm Contact ..................................16

2.1.6 Cabling ....................................................................16

2.1.7 Redundancy Overview ...............................................22

2.2 Mounting Installation ..........................................................23

2.2.1 Install DIN-Rail Mounting ..........................................23

2.2.2 Wall Mount Plate Mounting ........................................25

3. Applications ..............................................................................26

4. Troubleshooting.........................................................................28

5. Cable Connection Parameters .....................................................29

APPENDIX A: Networking Connection...............................................30

A.1 Converter’s RJ-45 Pin Assignments .......................................30

A.2 RJ-45 Cable Pin Assignments ...............................................31

1. Introduction

1.1 Package Contents

Check the contents of your package for the following parts:

Industrial Gigabit Media Converter x 1l

User's Manual x 1l

DIN Rail Kit x 1l

Wall Mount Kit x 1l

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them against to repack the product in case there is a

need to return it to us for repair.

The term “Industrial Gigabit Media Converter” mentioned in this

user’s manual also means the IGT-1205AT.

1.2 How to Use This Manual

This Industrial Gigabit Media Converter User Manual is

structured as follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical

installation of the Industrial Gigabit Media Converter.

Chapter 3 Application

The chapter explains the Industrial Gigabit Media Converter application.

Chapter 4 Troubleshooting

The chapter explains the troubleshooting of the Industrial Gigabit Media

Converter.

Chapter 5 Cable Connection Parameters

The chapter contains the cable connection parameters of the Industrial

Gigabit Media Converter.

Appendix A

This chapter contains cable information of the Industrial Gigabit Media

Converter.

1.3 Product Features

Physical Port

1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function

2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)

Layer 2 Features

IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard

Compliant

Supports Auto-negotiation and 10/100Mbps half / full duplex and

1000Mbps full duplex mode

Prevents packet loss with back pressure (Half-Duplex) and IEEE

802.3x PAUSE frame ow control (Full-Duplex)

9K Jumbo Frame Size support

Automatic address learning and address aging

Industrial Case / Installation

Slim type IP30 metal case / protection

DIN Rail and Wall Mount Design

Redundant Power Design

- 12 to 48V DC, redundant power with polarity reverse protect func-

tion

- AC 24V power adapter acceptable

Supports EFT protection for 6000 VDC for power line

Supports 6000 VDC Ethernet ESD protection

-40 to 75 degrees C operating temperature

Fiber Port Redundancy

Link status auto-detect and redundant on Dual ports with same

connector type

Only when Primary-Port is active, the Backup-Port is blocked

 When Primary-Port link fails, the trafc will swap to Backup-Port

automatically

 Once the Primary-Port status is back to link up, the trafc will swap

from Backup-Port to Primary-Port

1.4 ProductSpecications

Model IGT-1205AT

Hardware Specication

10/100/1000Base-T

Ports 1

SFP Interfaces

2 1000Base-SX/LX/BX SFP interfaces

(Port-1 and Port-2)

Compatible with 100Base-FX SFP

Dimensions

(W x D x H) 135 x 87 x 32mm

Weight 505g

Power Requirements

DC 12~48V, Redundant power with polarity

reverse protection function. AC 24V Power

Adapter

Power Consumption /

Dissipation 4.8 watts/16BTU

Installation DIN Rail Kit and Wall Mount Ear

Converter Specication

Processing Scheme Store-and-Forward

Flow Control Back pressure for half duplex

IEEE 802.3x Pause Frame for full duplex

Fabric 6Gbps

Throughput

(packet per second) 4.46Mpps

Maximum

Transmission Unit 9216bytes

Network Cables

10/100/1000Base-T :

Cat. 3, 4, 5, 5e, 6 UTP cable (100meters,

max.)

EIA/TIA-568 100-ohm STP (100meters,

max.)

1000Base-SX :

50/125μm or 62.5/125μm multi-mode

ber optic cable, up to 550m (vary on SFP

module)

1000Base-LX :

9/125μm single-mode ber optic cable, up to

10/20/30/40/50/70/120 kilometers (vary on

SFP module)

100Base-FX :

50/125μm or 62.5/125μm multi-mode ber

optic cable, up to 2 kilometers (vary on SFP

module)

9/125μm single-mode ber optic cable, up to

20/40/60 kilometers (vary on SFP module)

Standards Conformance

Standards

Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3z Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

Regulation

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (Free fall)

IEC60068-2-27 (Shock)

IEC60068-2-6 (Vibration)

Environment

Temperature Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity Operating: 5~95% (Non-condensing)

Storage: 5~95% (Non-condensing)

1.5 Physical Dimensions

IGT-1205AT Industrial Gigabit Media Converter dimensions (W x D x

H): 135 x 87 x 32mm

Side View

Bottom View

Front View

Mounting Kit

DIN-Rail Kit

Top View Rear View

1000 LNK/ACT

100 LNK/ACT

IGT-1205AT

10/100/1000T

P1 P2 FAULT

LNK/

ACT

SFP

1000X

LNK/

ACT

SFP

1000X

Input DC 12~48V, AC 24V

V1-

V1+

V2-

V2+

PWR1

Port 1

Port 2

Mode

Faul t

PWR2

100FX

Redundant

1000X

ON OFF

1000X

Switch

1 2 3

1 2 3 4 5 6

2. Installation

This section describes the functionalities of the Industrial Gigabit Media

Converter’s components and guides how to install it on the desktop.

Basic knowledge of networking is assumed. Please read this chapter

completely before continuing.

2.1 Product Description

Flexibility and Network Distance Extension Solution

The IGT-1205AT Industrial Gigabit Media Converter is equipped with

one 10/100/1000Base-T auto-negotiation port and two 100/1000X

SFP slots. The two SFP slots are compatible with 1000Base-SX / LX

or 100Base-FX through SFP (Small Form Factor Pluggable) ber-optic

transceiver; the two SFP slots allow changing the operation speed mode

with its built-in DIP switch. The ber optical uplink capability guarantees

the throughput to all nodes hooked into the network and the Gigabit

Ethernet distance can be extended from 550 meters (Multi-Mode ber

cable) up to 10/20/30/40/50/70/120 kilometers (Single-Mode ber

cable), also the Fast Ethernet distance can be extended from 2km

(Multi-Mode ber cable) up to 20/40/60 kilometers (Single-Mode ber

cable). They are well suited for applications within the factory data

centers and distributions.

Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode

Via the built-in DIP-switch, the two SFP ber interfaces of IGT-1205AT

can be congured as Ethernet switch mode or Fiber Redundant mode.

With the Ethernet switch mode, it can operate Store-and-Forward

mechanism with high performance; with the 2-Port Fiber Redundant

mode, it provides redundancy of link for highly critical Ethernet

applications. The redundant mode supports auto-recover function. If

the destination port of a packet is link down, it forwards the packet to

the other port of the backup pair.

Environmentally Hardened Design

With IP30 metal industrial case protection, the IGT-1205AT provides a

high level of immunity against electromagnetic interference and heavy

electrical surges which are usually found on plant oors or in curb side

Tabla de contenidos

Otros manuales de Convertidor de medios de Planet

Planet

Planet VC-201A Manual de usuario

Planet

Planet GT-915A Manual de usuario

Planet

Planet IXT-705AT Manual de usuario

Planet

Planet GT-805A Manual de usuario

Planet

Planet Media Converter Chassis MC-1500 Manual de usuario

Planet

Planet GT-80X Series Manual de usuario

Planet

Planet FT-801 Manual de usuario

Planet

Planet VC-202 Manual de usuario

Planet

Planet VF-101-T Manual de usuario

Planet

Planet IECC-210T Manual de usuario

Planet

Planet Media Converter Chassis MC-1000R Manual de usuario

Planet

Planet FT-90X FT-902 Manual de usuario

Planet

Planet PL-101E Manual de usuario

Planet

Planet IPOE-171S Manual de usuario

Planet

Planet IGUP-1205AT Manual de usuario

Planet

Planet WFT-201 Manual de usuario

Planet

Planet ICS-100 Manual de usuario

Planet

Planet Media Converter Chassis MC-1000R Manual de usuario

Planet

Planet FT-801 Manual de usuario

Planet

Planet SMART MEDIA CONVERTER GST-70X Manual de usuario

Planet

Planet EM-GT70X Manual de usuario

Planet

Planet Power over Ethernet Splitter POE-152S-12V Manual de usuario

Planet

Planet GTP-805A Manual de usuario

Planet

Planet IGTP-802T Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario