Planet IGUP-1205AT Manual de usuario
Industrial 100/1000X to 10/100/1000T 802.3bt PoE++
Media Converter series
IGUP-1205AT/IGUP-2205AT
User's Manual
Table of Contents
1. Package Contents................................................................................. 3
2. ProductSpecications ........................................................................... 4
3. Hardware Introduction .......................................................................... 7
3.1 Three-View Diagram....................................................................... 7
3.2 LEDDenition: ............................................................................ 10
3.3 Wiring the Power Inputs............................................................... 11
3.4 Wiring the Alarm Contact ............................................................. 12
3.5 Grounding the Device................................................................... 13
4. Hardware Installation.......................................................................... 14
4.1 DIN-rail Mounting Installation ....................................................... 14
4.2 Wall-mount Plate Mounting ........................................................... 14
5. Fiber and PoE Installation.................................................................... 16
Customer Support.................................................................................... 17
3
1. Package Contents
Thank you for purchasing PLANET compact industrial 100/1000X to
10/100/1000T 802.3bt PoE++ Media Converter series, IGUP-1205AT and
IGUP-2205AT. In the following sections, the term “Industrial PoE++ Media
Converter” means the IGUP-1205AT or IGUP-2205AT.
Open the box of the Industrial PoE++ Media Converter and carefully unpack it.
Theboxshouldcontainthefollowingitems:
Industrial PoE++ Media
Converter x 1 QR code sheet x 1 Wall-mount Kit x 1
DIN-rail Kit x 1 RJ45 Dust Cap
(1205AT x 1/2205AT x 2) SFP Dust Cap x 2
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a need to
return it to us for repair.
4
2.ProductSpecications
Model IGUP-1205AT IGUP-2205AT
HardwareSpecications
Copper Port 1 x 10/100/1000BASE-T 2 x 10/100/1000BASE-T
SFP Slot 2 x 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
Flow Control Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size 9K
LED
System:
PWR1 (Green), PWR12 (Green), Alarm (Red)
PoEUsage:
1205AT:30W/60W/90W(Amber)
2205AT:60W/120W/180W(Amber)
Fiber:
100BASE-X:LNK/ACT(Amber)
1000BASE-X:LINK/ACT(Green)
TP:
10/100/1000BASE-T:LNK/ACT(Green)
PoE-in-Use (Amber)
Dimensions
(W x D x H) 55 x 85 x 135 mm
Weight 622 g 630 g
Power Requirements 12-56V DC, supports reverse polarity protection
Power Consumption
System ON without
loading
12VDC:2.64W
56VDC:2.8W
Full loading with PoE
12VDC:79.56W
56VDC:100.24W
System ON without
loading
12VDC:4.2W
56VDC:2.8W
Full loading with PoE
12VDC:79.44W
56VDC:187.6W
DIP Switch Standard/Legacy mode
5
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
Cables
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100
meters)
EIA/TIA-568 100-ohm STP (maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode:50/125μmor62.5/125μmopticalber
Single-mode:9/125μmopticalber
Power Over Ethernet
PoE Standard IEEE 802.3bt Power over Ethernet Plus Plus
Backward compatible with IEEE 802.3at PoE+
PoE Power Output Standard(BT)mode:90W
Legacy(PoH)mode:95W
PoE Power Supply
Type End-span + Mid-span
Power Pin
Assignment
End-span:1/2(-),3/6(+);
Mid-span:4/5(+),7/8(-)
PoE Power Budget 95 watts 190 watts
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Protocols and
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE802.3azEnergyEcientEthernet(EEE)
6
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature Operating:-40~75degreesC
Storage:-40~85 degreesC
Humidity Operating:5~90%(non-condensing)
Storage:5~90%(non-condensing)
7
3. Hardware Introduction
3.1 Three-View Diagram
The three-view diagram of the Industrial PoE++ Media Converter consists
of Ethernet interfaces and one removable 6-pin terminal block. The LED
indicators are also located on the front panel.
50.00 [1.97]
87.80 [3.46]
97.10 [3.82]
48.80 [1.92]47.30 [1.86] 38.90 [1.53]
135.00 [5.31]
9.20 [0.36]
56.00 [2.20]
107.00 [4.21]
28.00 [1.10]
18.00 [0.71]
40.00 [1.57]
50.00 [1.97]
18.00 [0.71]
40.00 [1.57]
50.00 [1.97]
48.80 [1.92]
50.00 [1.97]
163.00 [6.42]
P1 P2 Alarm
30W 60W 90W
3
2
1
IGUP-1205AT
802.3bt PoE++
LNK ACT
PoE-in-Use
LNK ACT
LNK
1000
100 ACT
Standard Legacy
Top View
Side View Front View
Mounting Kit
Mounting Kit
DIN-Rail Kit
Side View Rear View
Unit: mm
Bottom View
V1+ V2+
PWR1 PWR2Alarm
DC Input:
12-56V , 6A max.
Max. Fault Alarm Loading: 24V, 1A
Figure 1: IGUP-1205AT Three-View Diagram
8
50.00 [1.97]
87.80 [3.46]
97.10 [3.82]
48.80 [1.92]47.30 [1.86] 38.90 [1.53]
135.00 [5.31]
9.20 [0.36]
56.00 [2.20]
107.00 [4.21]
28.00 [1.10]
18.00 [0.71]
40.00 [1.57]
50.00 [1.97]
18.00 [0.71]
40.00 [1.57]
50.00 [1.97]
48.80 [1.92]
50.00 [1.97]
163.00 [6.42]
P1 P2 Alarm
60W 120W 180W
4
3
1
IGUP-2205AT
802.3bt PoE++
LNK ACT
PoE-in-Use
LNK ACT
LNK
1000
100 ACT
Standard Legacy
2
Top View
Side View Front View
Mounting Kit
Mounting Kit
DIN-Rail Kit
Side View Rear View
Unit: mm
Bottom View
V1+ V2+
PWR1 PWR2Alarm
DC Input:
12-56V , 6A max.
Max. Fault Alarm Loading: 24V, 1A
Figure 2: IGUP-2205AT Three-View Diagram
9
Front View
P1 P2 Alarm
30W 60W 90W
3
2
1
IGUP-1205AT
802.3bt PoE++
LNK ACT
PoE-in-Use
LNK ACT
LNK
1000
100 ACT
Standard Legacy
P1 P2 Alarm
60W 120W 180W
4
3
1
IGUP-2205AT
802.3bt PoE++
LNK ACT
PoE-in-Use
LNK ACT
LNK
1000
100 ACT
Standard Legacy
2
Figure 3: IGUP-1205AT/IGUP-2205AT Front View
10
3.2 LEDDenition:
System
LED Color Function
P1 Green Lights to indicate DC power input 1 has power.
P2 Green Lights to indicate DC power input 2 has power.
Alarm Red Lights to indicate that DC power has failed.
PoE Usage Amber
IGUP-1205AT (30W, 60W, 90W)
Lights to indicate the system consumes over 30-/60-
/90-watt PoE power budget.
Blinks to indicate the system consumes less than
30-/60-/90-watt PoE power budget.
IGUP-2205AT (60W, 120W, 180W)
Lights to indicate the system consumes over 60-/120-
/180-watt PoE power budget.
Blinks to indicate the system consumes less than
60-/120-/180-watt PoE power budget.
Gigabit TP Interface
LED Color Function
TP LNK/ACT Green
Lights to indicate that the copper port is successfully
connecting to the network at 10/100/1000Mbps.
Blinks to indicate the copper port is receiving or
sending data.
PoE-in-Use Amber
Lights to indicate that the port is providing inline
power to remote powered device.
Otoindicatethattheportisnotprovidinginline
power to remote powered device.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Convertidor de medios de Planet
Planet
Planet ICS-100 Manual de usuario
Planet
Planet Media Converter Chassis MC-1500 Manual de usuario
Planet
Planet vc-231 Manual de usuario
Planet
Planet SMART MEDIA CONVERTER GST-70X Manual de usuario
Planet
Planet FT-807 Manual de usuario
Planet
Planet ICS-2100 Manual de usuario
Planet
Planet XT-705A Manual de usuario
Planet
Planet VC-232G Manual de usuario
Planet
Planet IGT-1205AT Manual de usuario
Planet
Planet GT-80X Series Manual de usuario
Planet
Planet FT-722 Manual de usuario
Planet
Planet GEPON EPL-SPT-8 Manual de usuario
Planet
Planet VC-202 Manual de usuario
Planet
Planet VC-102M Manual de usuario
Planet
Planet IGTP-802T Manual de usuario
Planet
Planet FT-1105A Manual de usuario
Planet
Planet VF-101-T Manual de usuario
Planet
Planet GT-922 Manual de usuario
Planet
Planet VC-231G Manual de usuario
Planet
Planet FT-701B Manual de usuario
