Planet GT-805A Manual de usuario
10/100/1000BASE-T to 100/1000BASE-X
Media Converter
GT-805A
User’s Manual
Table of Contents
1. Product Features............................................................... 3
2. Checklist .......................................................................... 4
3. Product Outlook................................................................ 5
4. Link Fault Pass-Through (LFP) ............................................ 7
5. Installing The Converter .................................................... 8
6 Duplex Mode Support...................................................... 10
7. LED indication ................................................................ 11
8 Cable Connection Parameter ............................................ 12
9.ProductSpecications ..................................................... 13
3
1.Product Features
GT-805A Gigabit Ethernet Media Converter:
Complies with IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX/FX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z
1000BASE-SX/LX standard
Data transfer rate: TP – 10/100/1000Mbps; SFP –
100/1000Mbps
DIP switch for LFP function (Disable/Enable) setting
OAM (TS-1000 and IEEE 802.3ah) supported
9K jumbo frame supported
Compliant with PLANET’s 10”/19” media converter chassis
4
2.Checklist
Your GT-805A carton should contain the following items:
The Gigabit Ethernet Media Converter
AC-DC Power Adapter (Output: 5V DC, 2A max.)
This User’s Manual
If any item is missing or damaged, please consult the dealer
from whom you purchased your Gigabit Ethernet Media
Converter.
Note
The GT-805A comes with one vacant SFP module
slot. The mini GBIC SFP module is not bundled
with in the package.
5
3.Product Outlook
Right View (GT-805A)
There are one RJ45 twisted-pair jack (auto-MDI/MDI-X), one
100/1000XSFPber-optic slot andfourLEDindicators. Also one
DIP switch for Link-Fault Passthrough (LFP) feature and “ON” to
turn on the LLCF and LLR detection. And “OFF” to turn off the
feature. Please refer to the following sections for more.
Gigabit Ethernet Converter
10/100/1000BASE-Tto 100/1000BASE-X
100/1000X
LNK
ACT
PWR 1000
LFP
OFF
ON
TPFiber
LNK /ACT
Figure 1: GT-805A Right View
Left View (GT-805A)
The rear panel of the Gigabit Ethernet Media Converter indicates
one DC jack, which accepts input power with 5V DC 2A.
5V DC
+
Figure 2: GT-805A Left View
6
Power Information
The power jack of Gigabit Ethernet Media Converter is with
2.5mm in the central post and required +5VDC power input.
It will conform to the bundled AC-DC adapter and Planet’s
Media Chassis. Should you have the issue to make the power
connection, please contact your local sales representative.
Please keep the AC-DC adapter as spare parts when your
Gigabit Ethernet Media Converter is installed to a Media Chassis.
2.5mm
DC Receptacle 2.5mm
+5V for each slot
DC receptacle is 2.5mm wide that conforms to the Gigabit
Ethernet Media Converter’s 2.5mm DC jack’s central post. Do
not install any improper unit.
7
4.Link Fault Pass-Through (LFP)
The LFP function includes the Link-Fault-Passthrough function
(LLCF/LLR) and the DIP Switch design. LLCF/LLR can
immediately alarm administrators the issue of the link media
and provide efcient solution to monitor the network. The DIP
Switch will disable or enable the LFP function.
LLCF (Link Loss Carry Forward) means when a device is
connected to the converter and the TP line loses the link,
the converter’s ber will disconnect the link of transmit. LLR
(Link Loss Return) means when a device is connected to the
converter and the ber line loses the link, the converter’s ber
will disconnect the link of transmit.
Note
LFP function is ON by default setting. If you are
familiar with the network installation and for diag-
nostic purpose (i.e. check which end is broken),
you can turn it off and reset the converter to
make it take effect. Otherwise, please remain it in
the default position.
8
5.Installing The Converter
To install GT-805A stand-alone, on a desktop or shelf, simply
complete the following steps:
Step 1: Turn off the power of the device/station in a network
to which the GT-805A will be attached.
Step 2: Attach ber cable from the GT-805A to the ber
network. TX and RX must be paired at both ends.
Step 3: Attach a Cat. 5/5e/6 UTP cable from the
10/100/1000BASE-T network to the RJ45 port on the
GT-805A.
Step 4: Connect the 5V DC power adapter to the GT-805A
and verify that the Power LED lights up.
Step 5: Turn on the power of the device/station; the TX Link
and FX Link LEDs should light up when all cables are
attached.
RX
TX
GT-805A
TX
RX
10/100/1000BASE-T
Cat.5/5e/6 TP
Cable Network
1000BASE-SX/LX
Fiber Network
Figure 3: GT-805A Installation
9
Note
1. It is recommended to use PLANET MFB/MGB
series 100/1000BASE-FX/SX/LX SFP on the
GT-805A. If you insert an SFP transceiver that
is not supported, the GT-805A will not recog-
nize it.
2. Please check the link-budget of your SFP trans-
ceivers and its physical wiring distance. In
some installation, an in-line optical attenuator
may be required to protect your transceivers.
10
6 Duplex Mode Support
The GT-805A TP port supports triple speed
--
10/100/1000BASE-T, auto-negotiation. It will auto detect the link
speed and the duplex mode by default with its link partner. The
ber port (100/1000BASE-FX/SX/LX) allows 100/1000Mbps
full duplex by auto-negotiation. Please also check the setting
of the link partner as well.
Tabla de contenidos
Otros manuales de Convertidor de medios de Planet
Planet
Planet FST-811 Manual de usuario
Planet
Planet IFT-802 Manual de usuario
Planet
Planet VC-201A Manual de usuario
Planet
Planet WGT-702 Manual de usuario
Planet
Planet FT-90X FT-902 Manual de usuario
Planet
Planet FT-802S Manual de usuario
Planet
Planet GTP-805A Manual de usuario
Planet
Planet VC-102M Manual de usuario
Planet
Planet POE-173S Manual de usuario
Planet
Planet VC-232G Manual de usuario
Planet
Planet ICS-100 Manual de usuario
Planet
Planet IECC-210T Manual de usuario
Planet
Planet FT-712 Manual de usuario
Planet
Planet ICS-10 Series Manual de usuario
Planet
Planet FT-1105A Manual de usuario
Planet
Planet WGT-702 Manual de usuario
Planet
Planet FT-902 Manual de usuario
Planet
Planet VC-231G Manual de usuario
Planet
Planet XT-705A Manual de usuario
Planet
Planet FT-801 Manual de usuario
