Planet IGTP-802T Manual de usuario
1000BASE-X to 10/100/1000BASE-T
802.3at PoE
Industrial Media Converter
IGTP-802T/IGTP-802TS/IGTP-805AT
User’s Manual
Table of Contents
1. Introduction.............................................................................. 5
1.1 Package Contents ............................................................... 5
1.2 How to Use This Manual...................................................... 5
1.3 Product Features................................................................. 6
1.4 ProductSpecications ......................................................... 8
1.5 Physical Dimensions ...........................................................11
2. Installation ..............................................................................13
2.1 Product Description ............................................................13
2.1.1 Product Overview......................................................15
2.1.2 Converter Front Panel................................................15
2.1.3 LED Indicators ..........................................................16
2.1.4 Converter Upper Panel...............................................17
2.1.5 Wiring the Power Inputs ............................................17
2.1.6 Wiring the Fault Alarm Contact...................................18
2.2 Mounting Installation..........................................................19
2.2.1 DIN-rail Mounting......................................................20
2.2.2 Wall-mount Plate Mounting ........................................22
2.2.3 Fiber Installation .......................................................23
2.2.4 802.3at PoE Installation.............................................27
3. Link Passthrough Function.........................................................28
3.1 Link Loss Carry Forward (LLCF)...........................................28
3.2 Link Loss Return (LLR) .......................................................29
4. Troubleshooting ........................................................................31
5. Cable Connection Parameter......................................................32
Appendix A: Networking Connection ................................................33
A.1 Switch’s RJ45 Pin Assignments............................................33
A.2 RJ45 Cable Pin Assignments ...............................................34
3
Trademarks
Copyright © PLANET Technology Corp. 2018.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work
properly in all environments and applications, and makes no warranty
and representation, either implied or expressed, with respect to
the quality, performance, merchantability, or tness for a particular
purpose.
PLANET has made every effort to ensure that this User’s Manual is
accurate; PLANET disclaims liability for any inaccuracies or omissions
that may have occurred.
Information in this User’s Manual is subject to change without notice
and does not represent a commitment on the part of PLANET. PLANET
assumes no responsibility for any inaccuracies that may be contained in
this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, and reserves the right
to make improvements to this User’s Manual and/or to the products
described in this User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect, misleading, or
incomplete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio
4
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to
take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human
health as a result of the presence of hazardous substances in
electrical and electronic equipment, end users of electrical
and electronic equipment should understand the meaning of
the crossed-out wheeled bin symbol. Do not dispose of WEEE as
unsorted municipal waste and have to collect such WEEE separately.
Revision
PLANET 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Industrial
Media Converter User's Manual
For Models: IGTP-802T/IGTP-802TS/IGTP-805AT
Revision: 2.0 (September, 2018)
Part No: EM-IGTP-80xT_v2.0 (2350-AH1170-002)
In the following section, the term “Industrial 802.3at PoE Media
Converter” means the IGTP-802T/IGTP-802TS/IGTP-805AT.
5
1. Introduction
1.1 Package Contents
Check the contents of your package for the following parts:
uIndustrial 802.3at PoE Media Converter x 1
uUser’s Manual x 1
uDIN-rail Kit x 1
uWall Mounting Kit x 1
uRJ45 Dust Cap x 1
uSFP Dust Cap x 1
If any of these are missing or damaged, please contact your dealer
immediately, if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair.
In the following section, the term “Industrial 802.3at PoE Media
Converter” means the IGTP-802T/IGTP-802TS/IGTP-805AT.
1.2 How to Use This Manual
This Industrial 802.3at PoE Media Converter User Manual is
structured as follows:
Chapter 2 Installation
The chapter explains the feature, functionality and the physical
installation of the Industrial 802.3at PoE Media Converter.
Chapter 3 Link Passthrough
The chapter explains the link passthrough function of Industrial 802.3at
PoE Media Converter.
Chapter 4 Troubleshooting
The chapter explains the troubleshooting of the Industrial 802.3at PoE
Media Converter.
6
Chapter 5 Cable Connection Parameters
The chapter explains the cable connection parameters of the Industrial
802.3at PoE Media Converter.
Appendix A
This chapter contains cable information of the Industrial 802.3at PoE
Media Converter.
1.3 Product Features
Physical Port
1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE
Injector
1 1000BASE-SX/LX SC Fiber interface (IGTP-802T/IGTP-802TS)
1 SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual
mode (IGTP-805AT)
Power over Ethernet
Complies with IEEE 802.3at/af PoE Plus end-span PSE
1 IEEE 802.3at/af device powered
Supports PoE Power up to 30.8 watts for PoE port
Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet
port
Auto-detects IEEE 802.3at/af equipment and protects devices from
being damaged by incorrect installation
Remote power feeding up to 100m
IEEE 802.3at/af splitter devices compatible
Layer 2 Features
Supports auto-negotiation and 10/100Mbps half/full duplex and
1000Mbps full duplex mode on RJ45 port
Prevents packet loss with back pressure (half-duplex) and IEEE
802.3xpauseframeowcontrol(full-duplex)
7
Hardware
LED Indicators
–System: Power 1, Power 2 and Fault LED
–Fiber port: LNK/ACT
–10/100/1000BASE-T port: LNK/ACT, 1000, PoE-in-use
DIP switch: LFP (Link Fault Passthrough) mode selection
Industrial Case and Installation
IP30 metal case
DIN-rail and wall-mount design
12 ~ 48V DC/24V AC redundant power with polarity reverse protect
function and connective removable terminal block for master and
slave power
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature
8
1.4 ProductSpecications
Product IGTP-802T IGTP-802TS IGTP-805AT
Ethernet Interface
Copper
10/100/1000BASE-T Ethernet TP interface.
Maximum 100m distance.
Auto-negotiation, auto MDI/MDI-X with PoE
injector function
1000BASE-X
Fiber-optic
Connector Type
SC SC SFP (LC)
Fiber Cable
Multi-mode:
50/125µm or
62.5/125µm
opticber
Single-mode:
9/125µm optic
ber
Varying on
SFP Module
Fiber Cable Distance 220m & 550m 10km
Fiber Optical
Frequency 850nm 1310nm
Launch Power Max. -4dBm
Min. -9.5dBm
Max. -3dBm
Min. -9.5dBm
Receive Sensitivity -13.5dBm -14.4dBm
Maximum Input
Power -18dBm -20dBm
Power Over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
PoE Power Output 52V DC: 15.4 watts
52V DC: 30 watts
PoE Power Supply
Type End-span
Power Pin
Assignment 1/2(+), 3/6(-)
PoE Power Budget 30 watts
9
HardwareSpecications
Speed
Twisted-pair:
10/20Mbps for half/full duplex
100/200Mbps for half/full duplex
1000/2000Mbps for full duplex
Fiber Optic:
200Mbps / 2000Mbps for full duplex
Flow Control Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame
Size 9K
LED
System: Power 1, Power 2 and Fault LED
(green)
Fiber 1000BASE-X: LNK/ACT (green)
TP 10/100/1000BASE-T: LNK/ACT, 1000 (green)
PoE: Power-in-use (orange)
Dimensions
(W x D x H) 135 x 87 x 32 mm
Weight 510g 500g
Unit Input Voltage 12 ~ 48V DC
24V AC
Power Consumption
24V: 4.3 watts / 14BTU, 48V: 4.8 watts /
16BTU (without PoE)
24V: 33 watts / 112BTU, 48V: 31 watts /
105BTU (with PoE)
Link Fault
Passthrough
DIP Switch
ON/OFF
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
10
Alarm Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Cables
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100
meters)
EIA / TIA-568 100-ohm STP (maximum 100
meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode:50/125μmor62.5/125μmoptical
ber
Single-mode:9/125μm opticalber
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Protocols and
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Convertidor de medios de Planet
Planet
Planet ICS-100 Manual de usuario
Planet
Planet IGT-900 Series Manual de usuario
Planet
Planet GT-922 Manual de usuario
Planet
Planet FT-712 Manual de usuario
Planet
Planet FT-802S Manual de usuario
Planet
Planet GT-902 Manual de usuario
Planet
Planet WGT-705A Manual de usuario
Planet
Planet IGT-1205AT Manual de usuario
Planet
Planet Ethernet Over VDSL Converter EV-401M Manual de usuario
Planet
Planet VF-101G-KIT Manual de usuario
Planet
Planet XT-705A Manual de usuario
Planet
Planet FT-1105A Manual de usuario
Planet
Planet Power over Ethernet Splitter POE-152S-12V Manual de usuario
Planet
Planet GT-915A Manual de usuario
Planet
Planet POE-151 Manual de usuario
Planet
Planet FT-90X FT-902 Manual de usuario
Planet
Planet GT-702 Manual de usuario
Planet
Planet GST-802 Manual de usuario
Planet
Planet GEPON EPL-SPT-8 Manual de usuario
Planet
Planet GST-702/702S Manual de usuario
