Planet Networking & Communication MGS-910X Manual de usuario

8-Port 10/100/1000/2500T + 1-Port 10G SFP+

Multigigabit Ethernet Switch

8-Port 10/100/1000/2500T 802.3at PoE+ + 1-Port 10G SFP+

Multigigabit Ethernet Switch (120 Watts)

MGS-910X/MGS-910XP

User’s Manual

Table of Contents

1. Package Contents................................................................................. 3

2. Hardware Introduction .......................................................................... 4

2.1 Front Panel ................................................................................... 4

2.2 LED Indicators............................................................................... 4

2.3 Multiple Functions of DIP Switch ..................................................... 5

2.4 Switch Rear Panel .......................................................................... 7

3. Hardware Installation............................................................................ 8

3.1 Rack Mounting............................................................................... 8

3.2 Rack Mounting............................................................................... 9

3.3 Installing the SFP+ Transceiver ..................................................... 10

4. ProductSpecications ......................................................................... 13

5. Physical Dimensions ........................................................................... 16

Customer Support.................................................................................... 18

1. Package Contents

Thank you for purchasing PLANET 8-Port 10/100/1000/2500T Multigigabit

Ethernet Switch, MGS-910X or MGS-910XP. “Multigigabit Ethernet Switch”

mentioned in this User’s Manual refers to the MGS-910X or MGS-910XP.

Open the box of the Multigigabit Ethernet Switch and carefully unpack it. The

box should contain the following items:

Multigigabit Ethernet

Switch x 1

Quick Start QR Code

Sheet x 1

Rack-mounting

Brackets x 2

Let’s get started with your PLANET product

MGS-910X

EN Please scan the QR code to browse our online User’s Manual or Quick

Installation Guide and follow the instructions to complete the setup.

User's Manual

Bitte scannen Sie den QR- Code sie werden per Browser zur

Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den

Anweisungen um die Installation abzuschließen.

Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en

ligne ou notre Guide d’Installation Rapide et suivez les instructions pour

compléter la conguration

Escanee el código QR para encontrar el Manual del Usuario en línea o

la Guía de Instalación Rápida y siga las instrucciones para completar la

conguración.

IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di

installazione rapida e segui le istruzioni per completare la congurazione.

PT Por favor, escaneie o QR code para navegarno Manual do Usuário ou Guia

de Instalação Rápida. Siga as instruções para completar a conguração.

Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi

lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby

zakończyć poprawną kongurację.

One word modify: Отсканируйте QR-код, чтобы просмотреть наше

онлайн-руководство пользователя или руководство по быстрой

настройке, и следуйте инструкциям для завершения настройки

RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick

Installation Guide si a urmari instructiunile necesare in nalizarea instalarii

Need more help?

PLANET online FAQs:

http://www.planet.com.tw/en/support/faq

Technical Support: [email protected]

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

Part No. 2361-A37030-000

Power Cord x 1 SFP+ Dust Cap

x 1

Rubber Feet

x 4 Screws x 8

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a need to

return it to us for repair.

2. Hardware Introduction

2.1 Front Panel

The Front Panel of the Multigigabit Ethernet Switch consists of 8 auto-sensing

10/100/1000/2500Mbps Ethernet RJ45 ports and 1 10GBASE-X SFP+ slot. The

LED Indicators are also located on the front panel of the Multigigabit Ethernet

Switch.

 MGS-910X

10G SFP+

MGS-910X

8-Port 10/100/1000/2500T+1-Port 10G SFP+

Multigigabit Ethernet Switch

PWR

Standard

VLAN

10G

LNK/ACT

2 6

4 8

1 5

3 7

10/100/1000 LNK/ACT

2.5G LNK/ACT

 MGS-910XP

PWR

10G SFP+

MGS-910XP

8-Port 10/100/1000/2500T 802.3at PoE++1-Port 10G SFP+

Multigigabit Ethernet Switch

Standard

VLAN

10G

LNK/ACT

2 6

4 8

PoE

1 5

3 7

10/100/1000 LNK/ACT

2.5G LNK/ACT

PoE-in-Use

Figure 1: Front Panel

2.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate that the Switch has power.

 Per 10/100/1000/2500BASE-T Port

LED Color Function

10/100/1000

LNK/ACT Amber

Lights to indicate the link through that port is

established successfully at 10/100/1000Mbps.

Blinks to indicate that the Switch is actively sending

or receiving data over that port.

2500

LNK/ACT Green

Lights to indicate the link through that port is

established successfully at 2500Mbps.

Blinks to indicate that the Switch is actively sending

or receiving data over that port.

 10GBASE-X SFP+ Port

LED Color Function

LNK/ACT Green

Lights to indicate the link through that port is

established successfully at 10Gbps.

Blinks to indicate that the Switch is actively sending or

receiving data over that port.

 802.3at PoE+ TP Interface (MGS-910XP)

LED Color Function

802.3at PoE+

PoE-in-Use Amber

Lights to indicate that the port is providing PoE

in-line power to remote powered device.

OtoindicatethattheportisnotprovidingPoE

in-line power to remote powered device.

2.3 Multiple Functions of DIP Switch

The front panel of the Multigigabit Ethernet Switch provides one DIP switch for

Standard or VLAN mode selection. The detailed descriptions are shown in the

following table.

DIP Switch Mode Function

This mode operate as a general switch and all ports

operate at 10/100/1000/2500Mbps auto-negotiation.

All ports can communicate with one another.

This mode operate as a VLAN isolation switch and Ports

1 to 8 will isolate respectively.

Ports 1 to 8 can only communicate with port 9.

Please adjust the DIP switch before powering on the Multigigabit

Ethernet Switch.

Standard Mode (default)

Power

PoE IP Camera

100 meters (328 feet)

MGS-910XP

Standard

VLAN

2.5G

2.5G UTP with PoE

2.5G

VLAN Isolation Mode

NVR

MGS-910XP

IP Camera

Standard

VLAN

Ports 1 to 8

Access Denied

Port 9

Ports 1~8 Access Permitted

1000BASE-T UTP

2.5G

2.5G UTP with PoE

10G

10GBASE-SR/LR Fiber Optic

2.5G

10G

2.4 Switch Rear Panel

Figure 2 shows the rear panel of the MGS-910X/910XP

MGS-910X

50/60Hz

100-240V , 1A max.

MGS-910XP

50/60Hz

100-240V , 3A max.

Figure 2: Rear Panel

AC Power Receptacle

The device is a power-required device, which means it will not

work till it is powered. If your networks should be active all the

time, please consider using UPS (uninterrupted power supply)

for your device. It will prevent you from network data loss or

network downtime.

In some areas, installing a surge suppression device may also

help to protect your Multigigabit Ethernet Switch from being

damaged by unregulated surge or current to the Multigigabit

Ethernet Switch or the power adapter.

3. Hardware Installation

This part describes how to install your Multigigabit Ethernet Switch and make

connections to it. Please follow the procedure below:

This Multigigabit Ethernet Switch does not need software config-

uration.

3.1 Rack Mounting

To install the Multigigabit Ethernet Switch on the desktop, simply follow these

steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the

Multigigabit Ethernet Switch.

PWR

10GSFP+

MGS-910XP

8-Port 10/100/1000/2500T 802.3at PoE++1-Port10G SFP+

Multigigabit Ethernet Switch

Standard

VLAN

10G

LNK/ACT

2 6

4 8

PoE

1 5

3 7

10/100/1000 LNK/ACT

2.5G LNK/ACT

PoE-in-Use

Step 2: Place the Multigigabit Ethernet Switch on the desktop near an AC

power source.

Step 3: Keep enough ventilation space between the Multigigabit Ethernet

Switch and the surrounding objects.

When choosing a location, please keep in mind the environ-

mental restrictions discussed in Section 3 under Product Speci-

fications.

Step 4: Connect your Multigigabit Ethernet Switch to network devices.

A. Connect one end of a standard network cable to the

10/100/1000/2500BASE-T RJ45 ports on the front of the

Multigigabit Ethernet Switch.

B. Connect the other end of the cable to the network devices such

as printer servers, workstations or routers, etc.

Step 5: Supply power to the Multigigabit Ethernet Switch.

A. Connect one end of the power cable to the Multigigabit Ethernet

Switch.

B. Connect the power plug of the power cable to a standard wall

outlet.

When the Multigigabit Ethernet Switch receives power, the Power LED should

remain solid Green.

3.2 Rack Mounting

To install the Multigigabit Ethernet Switch in a 19-inch standard rack, follow

the instructions described below:

Step 1: Place your Multigigabit Ethernet Switch on a hard at surface, with

the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the Switch with supplied

screws attached to the package. Figure 3 shows how to attach

brackets to one side of the Multigigabit Ethernet Switch.

PWR

10GSFP+

MGS-910XP

8-Port 10/100/1000/2500T 802.3at PoE++1-Port10G SFP+

Multigigabit Ethernet Switch

Standard

VLAN

10G

LNK/ACT

2 6

4 8

PoE

1 5

3 7

10/100/1000 LNK/ACT

2.5G LNK/ACT

PoE-in-Use

Figure 3: Attaching the brackets to the Multigigabit Ethernet Switch

Caution:

You must use the screws supplied with the mounting brackets. Damage caused

to the parts by using incorrect screws would invalidate your warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the opposite

side.

Step 5: After the brackets are attached to the Multigigabit Ethernet Switch,

use suitable screws to securely attach the brackets to the rack, as

shown in Figure 4.

PWR

10GSFP+

MGS-910XP

8-Port10/100/1000/2500T 802.3at PoE++1-Port 10G SFP+

Multigigabit Ethernet Switch

Standard

VLAN

10G

LNK/ACT

2 6

4 8

PoE

1 5

3 7

10/100/1000 LNK/ACT

2.5G LNK/ACT

PoE-in-Use

Figure 4: Mounting the Multigigabit Ethernet Switch in a Rack

Step 6: Proceed with Steps 4 and 5 of Desktop Installation to connect the

network cabling and supply power to your Multigigabit Ethernet

Switch.

3.3 Installing the SFP+ Transceiver

The sections describe how to insert an SFP+ transceiver into an SFP+ slot.

The SFP+ transceivers are hot-pluggable and hot-swappable. You can plug in

and out the transceiver to/from any SFP+ port without having to power down

the Multigigabit Ethernet Switch, as Figure 5 shows.

MTB-Series

SFP+ Transceiver

LC Fiber Cable

Figure 5: Plugging In the SFP+ Transceiver

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Planet Networking & Communication