Pioneer AVIC-EV01 Manual de usuario

Black plate (1,1)

Installation Manual

Manuel d’installation

NAVIGATION AV SYSTEM

SYSTEME DE NAVIGATION AV

SISTEMA DI NAVIGAZIONE AV

SISTEMA DE NAVEGACIÓN AV

NAVIGATIONS-/AV-SYSTEM

AV NAVIGATIESYSTEEM

AVIC-EVO1

English NederlandsDeutschEspañolItalianoFrançais

<CRD4965-A>1

Black plate (2,1)

Precautions

Your new product and this manual 3

Important safeguards 3

Connection

Precautions before connecting the

system 5

Before installing this product 5

To prevent damage 6

–Notice for the blue/white lead 6

Parts supplied 7

Connecting the power cord 8

Description of the coloured cables 9

Connecting the system 10

Connecting the main unit to the face

panel 11

Connecting to separately sold power

amp 12

Connecting an iPod / iPhone or an Android

device 13

Attaching identification labels to USB

cables 14

Connecting an iPhone with Lightning

connector 14

–Connecting via the USB port

(iPhone) 14

Connecting an iPhone with 30-pin

connector 15

–Connecting via the AUX input

(iPhone) 15

Connecting the Android™device 15

Connecting a rear view camera 16

Using an AUX input 17

Connecting the rear display 18

–When using a rear display connected to

rear video output 18

Installation

Precautions before installation 19

To avoid electromagnetic interference 19

Before installing 19

Installing this product 20

–Installation notes 20

Installing the GPS aerial 21

–Installation notes 21

Installing the microphone 22

After installation

After installing this product 23

<CRD4965-A>2

Contents

Engb

Black plate (3,1)

Your new product and this

manual

!The navigation features of this product

(and the rear view camera option if pur-

chased) are intended solely to aid you in

the operation of your vehicle. It is not a sub-

stitute for your attentiveness, judgement

and care when driving.

!Never use this product to route to hospi-

tals, police stations, or similar facilities in

an emergency. Please call the appropriate

emergency number.

!Do not operate this product, any applica-

tions, or the rear view camera option (if pur-

chased) if doing so will divert your attention

in any way from the safe operation of your

vehicle. Always observe safe driving rules

and follow all existing traffic regulations. If

you experience difficulty in operating this

product or reading the display, park your

vehicle in a safe location and apply the

handbrake before making the necessary

adjustments.

!This manual explains how to install this

product in your vehicle. Operation of this

product is explained in the separate man-

uals.

!Do not install this product where it may (i)

obstruct the driver’s vision, (ii) impair the

performance of any of the vehicle’s operat-

ing systems of safety features, including

airbags, hazard lamp buttons, or (iii) impair

the driver’s ability to safely operate the vehi-

cle. In some cases, it may not be possible

to install this product because of the vehi-

cle type or the shape of the vehicle interior.

!The graphical symbol placed on

the product means direct current.

Important safeguards

WARNING

Pioneer does not recommend that you install

this product yourself. This product is de-

signed for professional installation only. We

recommend that only authorised Pioneer ser-

vice personnel, who have special training

and experience in mobile electronics, set up

and install this product. NEVER SERVICE

THIS PRODUCT YOURSELF. Installing or

servicing this product and its connecting

cables may expose you to the risk of electric

shock or other hazards, and can cause da-

mage to this product that is not covered by

warranty.

CAUTION

To protect your hands from cut-wound accidents,

be sure to wear cut resistant gloves during instal-

lation.

!Read this manual fully and carefully before

installing this product.

!Keep this manual handy for future refer-

ence.

!Pay close attention to all warnings in this

manual and follow the instructions care-

fully.

!This product may in certain circumstances

display inaccurate position of your vehicle,

the distance of objects shown on the

screen, and compass directions. In addi-

tion, the system has certain limitations, in-

cluding the inability to identify one-way

streets, temporary traffic restrictions and

potentially unsafe driving areas. Please ex-

ercise your own judgement in the light of

actual driving conditions.

<CRD4965-A>3

Engb 3

English

Section

Precautions

Black plate (4,1)

!As with any accessory in your vehicle’s in-

terior, this product should not divert your

attention from the safe operation of your

vehicle as it may result in serious injury or

death. If you experience difficulty in operat-

ing the system or reading the display,

please make adjustments while safely

parked.

!Please remember to wear your seat belt at

all times while operating your vehicle. If

you are in an accident, your injuries can be

considerably more severe if your seat belt

is not properly fastened.

!Certain country and government laws may

prohibit or restrict the placement and use

of this product in your vehicle. Please com-

ply with all applicable laws and regulations

regarding the use, installation and opera-

tion of this product.

<CRD4965-A>4

Engb

Section

01 Precautions

Black plate (5,1)

Precautions before

connecting the system

WARNING

Do not take any steps to tamper with or dis-

able the handbrake interlock system which

is in place for your protection. Tampering

with or disabling the handbrake interlock

system could result in serious injury or

death.

CAUTION

!If you decide to perform the installation

yourself, and have special training and ex-

perience in the mobile electronics instal-

lations, please carefully follow all of the

steps in the installation manual.

!Secure all wiring with cable clamps or

electrical tape. Do not allow any bare wir-

ing to remain exposed.

!Do not directly connect the yellow lead of

this product to the vehicle battery. If the

lead is directly connected to the battery,

engine vibration may eventually cause

the insulation to fail at the point where

the wire passes from the passenger com-

partment into the engine compartment. If

the yellow lead’s insulation tears as a re-

sult of contact with metal parts, short-cir-

cuiting can occur, resulting in

considerable danger.

!It is extremely dangerous to allow cables

to become wound around the steering col-

umn or gearstick. Be sure to install this

product, its cables, and wiring away in

such so that they will not obstruct or hin-

der driving.

!Make sure that the cables and wires will

not interfere with or become caught in

any of the vehicle’s moving parts, espe-

cially the steering wheel, gearstick, hand-

brake, sliding seat tracks, doors, or any of

the vehicle’s controls.

!Do not route wires where they will be ex-

posed to high temperatures. If the insula-

tion heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

!Do not cut the GPS aerial cable to shorten

it or use an extension to make it longer.

Altering the aerial cable could result in a

short circuit or malfunction.

!Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse resis-

tor or filter, etc.) may fail to work properly.

!Never feed power to other electronic pro-

ducts by cutting the insulation of the

power supply lead of this product and tap-

ping into the lead. The current capacity of

the lead will be exceeded, causing over-

heating.

Before installing this product

!Use this product with a 12-volt battery and

negative earthing only. Failure to do so may

result in a fire or malfunction.

!To avoid shorts in the electrical system, be

sure to disconnect the (–) battery cable be-

fore installation.

<CRD4965-A>5

Engb 5

English

Section

Connection

Black plate (6,1)

To prevent damage

WARNING

!Use speakers over 50 W (maximum input

power) and between 4 Wto 8 W(impe-

dance value). Do not use 1 Wto 3 Wspeak-

ers for this product.

!The black lead is earth. Please earth this

lead separately from the earth of high-cur-

rent products such as power amps. Do not

earth more than one product together

with the earth from another product. For

example, you must separately earth any

amp unit away from the earth of this pro-

duct. Connecting earths together can

cause a fire and/or damage the products if

their earths became detached.

!When replacing the fuse, be sure to only

use a fuse of the rating prescribed on this

product.

!When disconnecting a connector, pull the

connector itself. Do not pull the lead, as

you may pull it out of the connector.

!This product cannot be installed in a vehi-

cle without ACC (accessory) position on

the ignition switch.

ACC position No ACC position

!To avoid short-circuiting, cover the discon-

nected lead with insulating tape. It is espe-

cially important to insulate all unused

speaker leads, which if left uncovered may

cause a short circuit.

!Attach the connectors of the same colour

to the corresponding coloured port, i.e.,

blue connector to the blue port, black to

black, etc.

!Refer to the owner’s manual for details on

connecting the power amp and other units,

then make connections accordingly.

!Since a unique BPTL circuit is employed,

do not directly earth the *side of the

speaker lead or connect the *side of an-

other side of the speaker lead together. Be

sure to connect the *side of the speaker

lead to the *side of the speaker lead on

this product.

Notice for the blue/white lead

Important

When this product is in “Power OFF”mode, the

control signal is also turned off. If “Power OFF”

mode is cancelled, the control signal is output

again and the aerial is extended with the auto aer-

ial function (if the aerial is being used). Be careful

so that the extended aerial does not come into

contact with any obstacles.

!When the ignition switch is turned on (ACC

ON), a control signal is output through the

blue/white lead. Connect to an external

power amp’s system remote control term-

inal, the auto-aerial relay control terminal,

or the aerial booster power control terminal

(max. 300 mA 12 V DC). The control signal

is output through the blue/white lead, even

if the audio source is switched off.

!Be sure not to use this lead as the power

supply lead for the external power amps.

Such connection could cause excessive

current drain and malfunction.

!Be sure not to use this lead as the power

supply lead for the auto-aerial or aerial

booster. Such connection could cause ex-

cessive current drain and malfunction.

<CRD4965-A>6

Engb

Section

02 Connection

Black plate (7,1)

Parts supplied

Main unit (*1) Face panel (*1)

Control cable for face

panel (*2)

USB and AUX cable

(*3)

Power cord GPS aerial

Microphone USB cable

(2 pcs.)

Vehicle adapter Cable for vehicle adap-

ter

Aerial conversion cable USB cable identifica-

tion labels

Notes

!(*1) The figure shown is an example. The main

unit and panel shapes vary depending on the

vehicle type. (For certain vehicle types, the

face panel is initially attached to the main

unit.)

!(*2) Connect the control cable between the

face panel and the main unit. (For certain ve-

hicle types, it is initially connected.)

!(*3) The figure shown is an example. The

cable shape varies depending on the vehicle

type. (For certain vehicle types, there is no

terminal cover.)

<CRD4965-A>7

Engb 7

English

Section

Connection

Black plate (8,1)

Connecting the power cord

4'#4

#7&+1

17 6

#7:





Power cord

Main unit

Fuse (10 A)

To auto-aerial relay control terminal or aerial booster

power control terminal (max. 300 mA 12 V DC).

Power supply

RGB input

30 cm

50 cm

1.5 m

DVD player

(sold separately)

Fuse (10 A)

To vehicle connector

Vehicle adapter

RGB output

Power supply

RGB cable

(supplied with the optional DVD player)

Power supply

Blue/white

<CRD4965-A>8

Engb

Section

02 Connection

Black plate (9,1)

Description of the coloured cables

Multiple coloured cables are bound together in a bundle. The function of each coloured cable is as follows.

Colour Functions

Yellow Back-up

Red Accessory

Orange/White Illumination

Black (earth) Earth

White Front speaker (left, +)

White/black Front speaker (left, –)

Grey Front speaker (right, +)

Grey/black Front speaker (right, –)

Green Rear speaker (left, +)

Green/black Rear speaker (left, –)

Violet Rear speaker (right, +)

Violet/black Rear speaker (right, –)

Pink This product is connected here to detect the distance the vehicle travels.

Light green Used to detect the ON/OFF status of the handbrake.

Violet/white

This cable has to be properly connected so that this product can detect whether the

vehicle is moving forwards or backwards. Check whether the voltage of this cable

changes when the reverse gear is engaged.

When you use a rear view camera, proper connection of this lead is necessary. Other-

wise, you cannot switch to the rear view camera image.

WARNING

IMPROPER CONNECTION OF PINK LEAD MAY

RESULT IN SERIOUS DAMAGE OR INJURY IN-

CLUDING ELECTRICAL SHOCK, AND INTERFER-

ENCE WITH THE OPERATION OF THE VEHICLE´

S ANTILOCK BRAKING SYSTEM, AUTOMATIC

GEARBOX AND SPEEDOMETER INDICATION.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS

DESIGNED TO DETECT PARKED STATUS AND

MUST BE CONNECTED. IMPROPER CONNEC-

TION OR USE OF THIS LEAD MAY VIOLATE AP-

PLICABLE LAW AND MAY RESULT IN SERIOUS

INJURY OR DAMAGE.

<CRD4965-A>9

Engb 9

English

Section

Connection

Black plate (10,1)

Connecting the system

4'#4

#7 &+1

17 6

#7:





3.55 m

Vehicle aerial

Microphone

3 m

WARNING

· To avoid the risk of accident and the potential violation of applicable laws, this product should

never be used while the vehicle is being driven except for navigation purposes. And, also rear

displays should not be in a location where it is a visible distraction to the driver.

· In some countries, the viewing of images on a display inside a vehicle even by persons other than

the driver may be illegal. Where such regulations apply they must be obeyed and this product’s

video source should not be used.

GPS aerial

For improved Digital Radio reception, make sure

a Digital Radio aerial with phantom power input

(active type) is used. Pioneer recommends

using AN-DAB1 or CA-AN-DAB.001 (sold

separately). Current consumption of the Digital

Radio aerial should be 100 mA or less.

CAUTION:

DAB aerial input

To aerial conversion cable

Blue/white

Power cord

Power supply

GPS aerial input

Aerial conversion cable

Aerial jack

Main unit

<CRD4965-A>10

Engb

Section

02 Connection

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Sistema de navegación para automóviles de Pioneer

Pioneer

Pioneer AVIC-X950BH Manual de usuario

Pioneer

Pioneer AVIC-S1 Manual de usuario

Pioneer

Pioneer AVIC-505 Manual de usuario

Pioneer

Pioneer AVIC U310BT - Navigation System With CD... Manual de usuario

Pioneer

Pioneer CNDV-50MTP Manual de usuario

Pioneer

Pioneer AVIC-F60BT Manual de usuario

Pioneer

Pioneer AVIC N2 - Navigation System With DVD player Manual de usuario

Pioneer

Pioneer AVIC-Z1 Manual de usuario

Pioneer

Pioneer AVIC-F910BT Manual de funcionamiento

Pioneer

Pioneer AVIC-D1 Manual de usuario

Pioneer

Pioneer AVIC-HD3 Manual de usuario

Pioneer

Pioneer AVIC N2 - Navigation System With DVD player Manual de usuario

Pioneer

Pioneer AVIC-Z2 - Navigation System With DVD player Manual de usuario

Pioneer

Pioneer AVIC-F88DAB Manual de funcionamiento

Pioneer

Pioneer AVIC-F60DAB Manual de usuario

Pioneer

Pioneer AVIC-N3 Manual de usuario

Pioneer

Pioneer AVIC-X1BT Manual de usuario

Pioneer

Pioneer Super Tuner IIID AVIC-F700BT Manual de usuario

Pioneer

Pioneer AVIC-F60BT Manual de usuario

Pioneer

Pioneer AVIC-Z110BT Manual de usuario

Pioneer

Pioneer AVIC-F77DAB Manual de usuario

Pioneer

Pioneer AVIC-D1 Manual de usuario

Pioneer

Pioneer CNSD-110FM Guía de inicio rápido

Pioneer

Pioneer AVIC-Z1 Manual de usuario

Manuales populares de Sistema de navegación para automóviles de otras marcas

Clarion

Clarion Navigation In-Car Entertainment Manual de usuario

Rosen

Rosen DP-1001 Manual de usuario

Alpine

Alpine INE-W970HD Manual de usuario

Skoda

Skoda AMUNDSEN+ Manual de usuario

Blaupunkt

Blaupunkt TravelPilot DX-N Manual de usuario

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Manual de usuario

Kenwood

Kenwood DNN991HD Manual de usuario

AvMap

AvMap Geosat 2C Manual de usuario

Eonon

Eonon GE01B Manual de usuario

Nextar

Nextar M3-MX - Automotive GPS Receiver Manual de usuario

Furrion

Furrion NV2200 Manual de usuario

Mio

Mio MOOV 200-Series Manual de usuario

Prestigio

Prestigio GeoVision 5150 Manual de usuario

Hummer

Hummer 2006 H3 Manual de usuario

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Guía de configuración

Garmin

Garmin StreetPilot c510 Manual de usuario

Garmin

Garmin nüvi 2200 Manual de usuario

Garmin

Garmin 2610/2650 Manual de usuario