Phrozen SONIC MIGHTY 8K Manual de usuario
Z- axis Calibration
Z-axis calibration is essential for every 3D printer. Run this test to make sure that the
building plate is leveled to the LCD screen. This is to ensure that models and prints
will adhere to the building plate.
SONIC MIGHTY 8K
Step 1: Remove the Resin Vat
Make sure to remove any objects present on the machine's platform.
Step 2: Install the Building Plate
Attach the building plate to the printer. Screw and tighten the building plate.
Step 3: Loosen the Screws
Use the Allen wrench to loosen all 4 screws on the sides of the building plate. After
loosening it, double-check to see if the plate is loose and movable.
Step 4: Place a piece of paper on the LCD
Prepare a piece of A4 paper (roughly 0.07-0.10 mm) and lay it flat on the LCD screen. This
piece of paper will be used for leveling the building plate.
Step 5: Settings
On the touch panel, click TOOLS, then click Z CALIB on your touch panel to begin the
calibration process. Click NEXT and wait for 1-2 minutes as the building plate extends to the
LCD screen.
Step 6: Apply Pressure on the Building Plate
Once the plate has touched down, press down tightly on the sides of the building plate and
adjust it to ensure it is lying tight against the sheet of paper.
Step 7: Tighten all Screws
Tighten all 4 screws on the sides of the building plate, with the other hand still pressing the
building plate down.
Step 8: Click DONE on the touch screen and wait for the building plate to retract.
Step 9: Done
Once the plate has retracted, remove the A4 paper, and you’re ready to begin your 3D
printing journey!
Tabla de contenidos
Otros manuales de Impresora 3D de Phrozen
Phrozen
Phrozen Transform Manual de usuario
Phrozen
Phrozen Sonic Mega 8K Manual de usuario
Phrozen
Phrozen SONIC 4K Manual de uso y cuidado
Phrozen
Phrozen Sonic Mini Series Manual de usuario
Phrozen
Phrozen MegaCure Manual de usuario
Phrozen
Phrozen SONIC MIGHTY 4K Manual de usuario
Phrozen
Phrozen SONIC MINI 8K Manual de uso y cuidado
Phrozen
Phrozen SONIC MINI 8K S Guía de instalación y uso
Phrozen
Phrozen SONIC MINI 4K Manual de usuario
Phrozen
Phrozen Shuffle 2019 Manual de usuario
