Philips GC3100 SERIES Manual de usuario

GC3100 SERIES

ENGLISH 4

 11

 20

 28

 35

 43

 51

 60

 68

 76

 84

 92

 101

 109

 117

 125

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet

from the support that Philips offers, register your product at www.philips.

com/welcome.

Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

Never immerse the iron in water.

Warning

Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

Do not use the appliance if the plug, the mains cord or the appliance

itself shows visible damage, or if the appliance has been dropped

or leaks.

If the mains cord is damaged, you must have it replaced by Philips, a

service centre authorised by Philips or similarly qualied persons in

order to avoid a hazard.

Never leave the appliance unattended when it is connected to the

mains.

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with the

appliance.

Do not let the mains cord come into contact with the hot soleplate of

the iron.

Caution

Only connect the appliance to an earthed wall socket.

Check the mains cord regularly for possible damage.

The soleplate of the iron can become extremely hot and may cause

burns if touched.

When you have nished ironing, when you clean the appliance, when

you ll or empty the water tank and also when you leave the iron even

for a short while: set the steam control to position 0, put the iron on

its heel and remove the mains plug from the wall socket.

Always place and use the iron on a stable, level and horizontal surface.

Do not put perfume, vinegar, starch, descaling agents, ironing aids or

other chemicals in the water tank.

This appliance is intended for household use only.



This Philips appliance complies with all standards regarding electromagnetic

elds (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientic evidence

available today.

ENGLISH



1 Remove any sticker or protective foil from the soleplate.

2 Let the iron heat up to maximum temperature and pass the iron

over a piece of damp cloth for several minutes to remove any

residues from the soleplate.





Do not put perfume, vinegar, starch, descaling agents, ironing aids,

chemically descaled water or other chemicals in the water tank.

Never immerse the iron in water.

1 Switch off the appliance and unplug it.

2 Set the steam control to position 0 (= no steam).

3 Openthecapofthellingopening.

4 Tilt the iron backwards.

5 Fill the water tank with tap water up to the maximum level with the

llingcup.

Do not ll the tank beyond the MAX indication.

Note: If the tap water in your area is very hard, we advise you to use distilled

water.

6 Closethecapofthellingopening(‘click’).



1 Put the iron on its heel.

2 To set the required ironing temperature, turn the temperature dial

to the appropriate position.

Check the laundry care label for the required ironing temperature:

1Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

1Silk

2Wool

3Cotton, linen

If you do not know what kind or kinds of fabric an article is made of,

determine the right ironing temperature by ironing a part that is not visible

when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to

prevent shiny patches. Avoid using the spray function to prevent stains.

Start ironing the articles that require the lowest ironing temperature, such

as those made of synthetic bres.

3 Put the mains plug in an earthed wall socket.

ENGLISH 5

4 When the temperature light goes out, wait a while before you start

ironing.

During ironing, the temperature light goes on from time to time.This

indicates that the iron is heating up to the set temperature.



Note: The iron may give off some smoke when you use it for the rst time. This

stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water tank.

2 Settherecommendedironingtemperature(seechapter‘Preparing

foruse’,section‘Settingthetemperature’).

3 Set the appropriate steam setting. Make sure that the steam setting

you select is suitable for the ironing temperature selected:

1 - 2 for moderate steam (temperature settings 2to 3)

3 - 4 for maximum steam (temperature settings 3 to MAX)

Note:The iron starts to produce steam as soon as it has reached the

set temperature.



1 Set the steam control to position 0 (= no steam).

2 Settherecommendedironingtemperature(seechapter‘Preparing

foruse’,section‘Settingthetemperature’).



Spray function

You can use the spray function at any temperature to moisten the article

to be ironed.This helps remove stubborn creases.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be

ironed.



A powerful steam boost helps remove stubborn creases.

The steam boost function can only be used at temperature settings

between 2 and MAX.

ENGLISH6

1 Press and release the steam boost button.



1 The steam boost function can also be used when you hold the iron

in vertical position.

This is useful for removing creases from hanging clothes, curtains etc.

Never direct the steam at people.



This iron is equipped with a drip-stop function: the iron automatically stops

producing steam when the temperature is too low to prevent water from

dripping out of the soleplate.When this happens you may hear a sound.



1 The built-in Anti-Calc system reduces the build-up of scale and

guarantees a longer life for the iron.



The automatic shut-off function automatically switches off the iron if it

has not been moved for a while.

The red auto-off light ashes to indicate that the iron has been

switched off by the automatic shut-off function.

To let the iron heat up again:

1 Pick up the iron or move it slightly.

The red auto-off light goes out.

If the temperature of the soleplate has dropped below the set

ironing temperature, the temperature light goes on.

ENGLISH 7

2 If the temperature light goes on after you have moved the iron, wait

for it to go out before you start ironing.

Note: If the temperature light does not go on after you move the iron, the

soleplate still has the right temperature and the iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the plug from the wall

socket and let the iron cool down.

2 Wipeakesandanyotherdepositsoffthesoleplatewithadamp

cloth and a non-abrasive (liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal objects.

Never use a scouring pad, vinegar or other chemicals to clean the

soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty the water tank

after cleaning.



You can use the Calc-Clean function to remove scale and impurities.

Use the Calc-Clean function once every two weeks. If the water in your

area is very hard (i.e. when akes come out of the soleplate during ironing),

use the Calc-Clean function more frequently.

1 Set the steam control to position 0, remove the plug from the wall

socket and let the iron cool down.

2 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents in the water tank.

3 Set the temperature dial to the maximum temperature.

4 Put the mains plug in an earthed wall socket.

5 Unplug the iron when the temperature light goes out.

6 Hold the iron over the sink, press and hold the Calc-Clean button

and gently shake the iron to and fro.

Steam and boiling water come out of the soleplate. Impurities and

akes(ifany)areushedout.

7 Release the Calc-Clean button when all the water in the tank has

been used up.

8 Repeat the Calc-Clean process if the iron still contains a lot of

impurities.



1 Put the plug in the wall socket and let the iron heat up to allow the

soleplate to dry.

2 Unplug the iron when the temperature light goes out.

ENGLISH8

3 Move the hot iron gently over a piece of used cloth to remove any

water stains that may have formed on the soleplate.

4 Let the iron cool down before you store it.

Storage

1 Set the steam control to position 0, remove the plug from the wall

socket and let the iron cool down.

2 Empty the water tank.

3 Wind the mains cord round the cord storage facility.

4 Store the iron on its heel in a safe and dry place.

Environment

Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an ofcial collection point for

recycling. By doing this, you help to preserve the environment.



If you need service or information or if you have a problem, please visit

the Philips website at www.philips.com or contact the Philips Consumer

Care Centre in your country (you nd its phone number in the worldwide

guarantee leaet). If there is no Consumer Care Centre in your country, go

to your local Philips dealer.



This chapter summarises the most common problems you could

encounter with the appliance. If you are unable to solve the problem with

the information below, contact the Consumer Care Centre in your country.

ENGLISH 9

Problem Possible cause Solution

The iron is plugged

in, but the soleplate

stays cold.

There is a connection

problem. Check the mains cord, the plug and the wall

socket.

The temperature dial is set

to MIN. Set the temperature dial to the required

position

The iron does not

produce any steam. There is not enough water in

the water tank. Fill the water tank (see chapter ‘Preparing for

use’, section ‘Filling the water tank).

The steam control is set to

position 0. Set the steam control to a position between 1

and 4 (see chapter ‘Using the appliance’, section

‘Steam ironing’).

The iron is not hot enough

and/or the drip-stop function

has been activated (specic

types only).

Set an ironing temperature that is suitable for

steam ironing ( 2 to MAX). Put the iron on its

heel and wait until the temperature light goes

out before you start ironing.

Water droplets

drip onto the fabric

during ironing.

You have put an additive in

the water tank. Rinse the water tank and do not put any additive

in the water tank.

You have not closed the cap

of the lling opening

properly.

Press the cap until you hear a click.

Flakes and impurities

come out of the

soleplate during

ironing.

Hard water forms akes

inside the soleplate. Use the Calc-Clean function one or more times

(see chapter ‘Cleaning and maintenance’, section

‘Calc-Clean function’).

The red auto-off light

ashes. The automatic shut-off

function has switched off the

iron (see chapter ‘Features’).

Move the iron slightly to deactivate the

automatic shut-off function.The red auto-off light

goes out.

Water drips from

the soleplate after

the iron has cooled

down or has been

stored (specic

types only).

You have put the iron in

horizontal position while

there was still water in the

water tank.

Always set the steam control to position 0 and

empty the water tank after use. Store the iron

on its heel.

The iron does not

produce a steam

boost.

You used the steam boost

function too often within a

short period.

Continue ironing in horizontal position and wait

a while before you use the steam boost function

again.

The iron is not hot enough. Set an ironing temperature at which the steam

boost function can be used (temperature

settings 2 to MAX). Put the iron on its heel

and wait until the temperature light goes out

before you use the steam boost function.

ENGLISH10

Tabla de contenidos

Idiomas:

Otros manuales de Hierro de Philips

Philips

Philips Azur GC4340 Manual de usuario

Philips

Philips GC2900 series Manual de usuario

Philips

Philips PerfectCare Elite Plus Manual de usuario

Philips

Philips Azur GC4532 Manual de usuario

Philips

Philips PerfectCare PSG6042/20 Manual de usuario

Philips

Philips Steam&Go GC320 Series Manual de usuario

Philips

Philips Perfect Care Aqua Pro GC9400 Series Manual de usuario

Philips

Philips GC7710/20 Manual de usuario

Philips

Philips GC4420 Manual de usuario

Philips

Philips GC3331 Manual de usuario

Philips

Philips GC6700 series Manual de usuario

Philips

Philips PerfectCare Aqua GC8600 Series Manual de usuario

Philips

Philips Azur Performer Plus GC4500 Series Manual de usuario

Philips

Philips HI5910/25 Manual de usuario

Philips

Philips InstantCare GC7500 Series Manual de usuario

Philips

Philips PERFECT CARE GC7800 Series Manual de usuario

Philips

Philips GC2040 series Manual de usuario

Philips

Philips GC4900 Manual de usuario

Philips

Philips HI418/20 Manual de usuario

Philips

Philips EasySpeed Plus GC2040 Series Manual de usuario

Philips

Philips GC7717/80 Manual de usuario

Philips

Philips GC2652 Manual de usuario

Philips

Philips GC4800 series Manual de usuario

Philips

Philips GC7020/02 Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

dyras

dyras ESI-2400AC Manual de usuario

GE 169061 Manual de usuario

Gorenje

Gorenje SIH 2200 GC Manual de usuario

AEG

AEG DBS 5591 Manual de usuario