Perle IDS-108FPP series Manual de usuario
Perle IDS-108FPP (XT)
Unmanaged 10/100 PoE/PoE+
Ethernet Switches with Fiber Ports
P/N 5500341-10 (Rev I)
Installation Guide
IDS-108FPP Installation Guide
2
Overview
This document contains instructions necessary for the
installation and operation of the Perle IDS-108FPP
unmanaged Ethernet switch. This Ethernet switch is a
8-port RJ-45 switch with PoE/PoE+ capabilities on
ports one through four. The PoE/PoE+ Ethernet ports
function as (PSE) Power Sourcing Equipment and can
each independently power a PD (Powered Device)
using standard UTP cables that carry Ethernet data.
Powered Devices must comply with the IEEE 802.3af
or the 802at-2009 standard for PoE or PoE+ devices.
The IDS-108FPP is available in various copper and
fiber configurations (see table below). The fiber ports
can be either single mode (SM) or multimode (MM)
depending on the model selected and can operate over
different wavelengths and distances. Visit the Perle
website for the most up to date installation guides,
models and specifications.
http://www.perle.com/
Note: xxxxxxxx(XT) indicates models numbers for this
product line.
TP = twisted pair
XT = Industrial Temperature models
Model Port 1-4 Port 5 - 8 Port 9 and 10
IDS-108FPP TP (RJ-45)
PoE/PoE+
TP (RJ-45) empty
IDS-108FPP-xxxxxxxx TP (RJ-45)
PoE/PoE+
TP (RJ-45) 1 or 2 fiber ports
(SC or ST)
IDS-108FPP-XT
(Industrial Temperature
Model)
TP (RJ-45)
PoE/ PoE+
TP (RJ-45) empty
IDS-108FPP-xxxxxxxx-XT
(Industrial Temperature
Model)
TP (RJ-45)
PoE/PoE+
TP (RJ-45) 1 or 2 fiber ports
(SC or ST)
IDS-108FPP Installation Guide
3
Features
•8 port 10/100Base-TX (RJ-45), with 1 or 2 fiber
ports (SC/ST), multi/single mode
•4 PoE/PoE+ PSE capable ports, fully compliant to
IEEE 802.3af/at
•Redundant DC power inputs 18-57 VDC
•Rugged, high strength IP30 aluminum case
•Industrial temperature models
•Din-rail or wall/panel mounting
Note – In this guide the various models will be referred to as
the IDS-108FPP
Getting to know your IDS-108FPP
Switch
Package Contents:
•IDS-108FPP
•DIN-rail mounting clip (pre-installed on the unit)
•This guide
Note – optional panel/wall mounting kits may be ordered for
the IDS-108FPP switch
IDS-108FPP Installation Guide
4
Front View of IDS-108FPP (8 port RJ-45)
IDS-108FPP Installation Guide
5
Front View of IDS-108FPP (
with one or two
fiber ports)
IDS-108FPP Installation Guide
6
Bottom view of the IDS-108FPP (with two ST
fiber ports installed)
Top view of the IDS-108FPP
The IDS-108FPP switch has two power inputs that can
be connected simultaneously. If one power source fails,
the other source acts as a backup, and automatically
powers the switch.
IDS-108FPP Installation Guide
7
Status LED
(with two fiber ports)
P1 / P2– Power (Green LED)
•On: Power present
•Off: No Power present
9 / 10 (Port 9 / 10 – Fiber) (Green LED)
•On: Link up
•Flashing: Link up and Ethernet activity detected
•Off: Link down
Ethernet Port Status
Port Link / Speed (Green and Yellow LEDs)
Port Link (Green LED)
•On: Link up
•Flashing: Link up and Ethernet activity detected
Port Speed (Yellow LED)
•On: communicating at 100 Mbps
•Off: communicating at 10 Mbps
IDS-108FPP Installation Guide
8
Views for the IDS-108FPP
IDS-108FPP Installation Guide
9
IDS-108FPP Installation Guide
10
Mounting the IDS-108FPP on a DIN-rail
1. The DIN-rail clip will be fixed to the back panel of
the IDS-108FPP switch when you receive the
product.
2. Position the IDS-108FPP such that the top of the
DIN rail fits into the slot on the top of the DIN-rail
clip, just below the DIN-rail hook and behind the
spring.
3. While pushing down on the unit to compress the
spring, rotate the bottom of the IDS-108FPP toward
the rail. This will snap the bottom of the rail into the
bottom of the clip. See diagram below.
Note: To remove the IDS-108FPP from the DIN-rail,
push down slightly on the IDS-108FPP unit while
pulling the bottom out.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cambiar de Perle
Perle
Perle IDS-409 Manual de usuario
Perle
Perle IDS-509C Manual de usuario
Perle
Perle IDS-105FE Series Manual de usuario
Perle
Perle IDS-509G Manual de usuario
Perle
Perle IDS-409-SFP Manual de usuario
Perle
Perle IDS-509-SFP Manual de usuario
Perle
Perle IDS-509-2SFP Manual
Perle
Perle IDS-710HP Manual de usuario
Perle
Perle IDS-305G Manual de usuario
Perle
Perle IDS-409-SFP Manual
Perle
Perle IOLAN SDG1 W Manual
Perle
Perle IDS-509G Manual
Perle
Perle IOLAN SDG2 W Manual de usuario
Perle
Perle 07013340 Manual
Perle
Perle IDS-306 Manual de usuario
Perle
Perle IDS-305F Manual de usuario
Perle
Perle RPS830 Manual de usuario
Perle
Perle IDS-409C Manual
Perle
Perle IDS-306 Manual
Perle
Perle IDS-409F Manual
