Overview
This document contains instructions necessary for the installation and operation of
the Perle Standalone PoE/PoE+ 10/100/1000 rate converting Media Converters (S-
1110P). These products have the ability to convert 10/100/1000Base-T cable
connections (copper) to 100/1000Base-X connections (fiber). The Perle media
converters function as a PoE switch, and support a variety of port configurations,
including single or dual UTP and fiber ports. These media converters function as
Power Sourcing Equipment (PSE) and can power either one or two Powered
Devices (PDs) using standard UTP cables that carry Ethernet data. The S-1110P
models are compatible with Powered Devices that comply with the IEEE 802.3af
standard and the S-1110PP models are compatible with Powered Devices that
comply with both the IEEE 802.3af and the 802at-2009 standard. The fiber
connection can be either single mode (SM) or multimode (MM) and can operate
over different wavelengths and distances, depending on the model selected (see
table below).
2 Port Models
PoE (P)
PoE+ (PP)
Connector
(xx) Mode
Distance Wavelength
(TX/RX)
S-1110P-M2xx05
S-1110PP-M2xx05 SC/ST MM
550 m/1804 ft. 850 nm
S-1110P-S2xx10
S-1110PP-S2xx10 SC/ST SM
10 km/6.2 mi. 1310 nm
S-1110P-S1SC10U
S-1110PP-S1SC10U SC SM
10 km/6.2 mi. 1310/1490 nm
S-1110P-S1SC10D
S-1110PP-S1SC10D SC SM
10 km/6.2 mi. 1490/1310 nm
S-1110P-S1SC20U
S-1110PP-S1SC20U SC SM
20 km/12.4 mi. 1310/1490 nm
S-1110P-S1SC20D
S-1110PP-S1SC20D SC SM
20 km/12.4 mi. 1490/1310 nm
S-1110P-S2xx40
S-1110PP-S2xx40 SC/ST SM
40 km/25 mi. 1310 nm
S-1110P-S1SC40U
S-1110PP-S1SC40U SC SM
40 km/25 mi. 1310/1490 nm
S-1110P-S1SC40D
S-1110PP-S1SC40D SC SM
40 km/25 mi. 1490/1310 nm
S-1110P-S2xx70
S-1110PP-S2xx70 SC/ST SM
70 km/43.5 mi. 1550 nm
S-1110P-S1SC80U
S-1110PP-S1SC80U SC SM
80 km/50 mi. 1510/1590 nm
S-1110P-S1SC80D
S-1110PP-S1SC80D SC SM
80 km/50 mi. 1590/1510 nm
S-1110P-S2xx120
S-1110PP-S2xx120 SC/ST SM
120 km/74.6 mi. 1550 nm
