PASCO OS-8525A Manual de usuario

Laser Light Avoid

Direct Eye Exposure

Laser Diode

DANGER

Lazer Light Avoid

Direct Eye Exposure

Lazer Diode

DANGER

BASIC OPTICS

DIODE LASER

Instruction Sheet

for the PASCO

Model OS-8525A

Basic Optics Diode Laser

012-07892A

6/01

$1.00

This instruction sheet written/edited by:

Mary Ellen Niedzielski

➂Turn the Laser Diode power on.

If necessary, the beam location can be adjusted by

turning the Horizontal and Vertical Adjust screws on

the back of the Laser.

Aligning laser using the OS-8517 Light

Source and OS-8515 Optics Bench.

➀Mount the Light Source and the Laser at opposite ends

of the Optics Bench.

➁Turn the Light Source so the crosshair image is facing

the Laser.

➂Turn the Laser on and turn the Horizontal and Vertical

Adjust screws until the Laser spot is centered on the

crosshair image.

Equipment

Basic Optics

Laser Diode

9VDC

Adapter

Introduction

The PASCO Model OS-8525A Basic Optics Diode Laser

includes a laser diode and mount, and a 9 VDC AC

adapter. The Basic Optics Diode Laser was designed as

an accessory to the Model

OS-8515 Basic Optics System. The laser is permanently

mounted in a freestanding holder which allows it to be

used with other optics systems.

Specifications

Class: II Laser

Wavelength: 650 nm

Max. Output: < 1mW

Setup Procedure

➀Attach the Basic Optics Diode Laser to the OS-8515

Optics Bench by gently squeezing the base and insert-

ing it into the bench. The base will snap into place.

➁Plug the AC Adapter phone plug connector into recep-

tacle on the back of the Laser.

Vertical

Adjustment

Horizontal

Adjustment

Beam Adjustments

better

teach science

ways to

Phone (916) 786-3800 • FAX (916) 786-8905 • email: [email protected]

10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA

Basic Optics Diode Laser 012-07892A

Feed-Back

If you have any comments about this product or this

manual please let us know. If you have any suggestions

on alternate experiments or find a problem in the manual

please tell us. PASCO appreciates any customer feed-back.

Your input helps us evaluate and improve our product.

To Reach PASCO

For Technical Support call us at 1-800-772-8700 (toll-free

within the U.S.) or (916) 786-3800.

Internet: [email protected]

Tech Support Fax: (916)786-3292

Contacting Technical Support

Before you call the PASCO Technical Support staff it

would be helpful to prepare the following information:

• If your problem is computer/software related, note:

Title and Revision Date of software.

Type of Computer (Make, Model, Speed).

Type of external Cables/Peripherals.

• If your problem is with the PASCO apparatus, note:

Title and Model number (usually listed on the label).

Approximate age of apparatus.

A detailed description of the problem/sequence of

events. (In case you can't call PASCO right away, you

won't lose valuable data.)

If possible, have the apparatus within reach when call-

ing. This makes descriptions of individual parts much

easier.

• If your problem relates to the instruction manual, note:

Part number and Revision (listed by month and year on

the front cover).

Have the manual at hand to discuss your questions

Limited Warranty

PASCO scientific warrants this product to be free from

defects in materials and workmanship for a period of one

year from the date of shipment to the customer. PASCO

will repair or replace, at its option, any part of the product

which is deemed to be defective in material or workman-

ship. This warranty does not cover damage to the product

caused by abuse or improper use. Determination of

whether a product failure is the result of a manufacturing

defect or improper use by the customer shall be made

solely by PASCO scientific. Responsibility for the return

of equipment for warranty repair belongs to the customer.

Equipment must be properly packed to prevent damage

and shipped postage or freight prepaid. (Damage caused

by improper packing of the equipment for return shipment

will not be covered by the warranty.) Shipping costs for

returning the equipment, after repair, will be paid by

PASCO scientific.

Otros manuales de Instrumento de medición de PASCO

PASCO

PASCO ES-9077 Manual de usuario

PASCO

PASCO PASPORT PS-2131 Manual de usuario

PASCO

PASCO OS-8526A Manual de usuario

PASCO

PASCO PS-3215 Manual de usuario

PASCO

PASCO PS-3211 Manual de uso y cuidado

PASCO

PASCO PS-3320 Manual de usuario

PASCO

PASCO SF-9568A Manual de usuario

PASCO

PASCO PS-3521 Manual de usuario

PASCO

PASCO PASPort PS-2128 Manual de usuario

PASCO

PASCO PASPort Xplorer PS-2000 Manual de usuario

PASCO

PASCO PS-3237 Manual de usuario

PASCO

PASCO Pasport PS-2152 Manual de usuario

PASCO

PASCO TD-8564 Manual de usuario

PASCO

PASCO OS-8525A Manual de usuario

PASCO

PASCO TD-8513 Manual de usuario

PASCO

PASCO PS-3234 Manual de usuario

PASCO

PASCO ME-9837 Manual de usuario

PASCO

PASCO PASPORT PS-2152 Manual de usuario

PASCO

PASCO PASPORT PS-2204 Manual de usuario

PASCO

PASCO ME-9495A Manual de usuario

PASCO

PASCO SP-9285 Manual de usuario

PASCO

PASCO PS-3234 Manual de usuario

PASCO

PASCO PASPORT PS-2148 Manual de usuario

PASCO

PASCO Pasport PS-2600 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario