Parker AC30V Series Manual de usuario

AC30V series

Fan Control Application

HA502134U002 Issue 2

Technical Manual

aerospace

climate control

electromechanical

ﬁltration

ﬂuid & gas handling

hydraulics

pneumatics

process control

sealing & shielding

ENGINEERING YOUR SUCCESS.

www.comoso.com

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS

CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannin Corporation, its subsidiaries and authorized distributors provide product or

system options for further investigation by users having technical expertise.

The user, through its own analysis and testing, is solely responsible for making the nal selection of the system and components

and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user

must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in

the current product catalogue and in any other materials provided from Parker Hannin Corporation or its subsidiaries or authorized

distributors.

To the extent that Parker Hannin Corporation or its subsidiaries or authorized distributors provide component or system options based

upon data or specications provided by the user, the user is responsible for determining that such data and specications are suitable

and sufcient for all applications and reasonably foreseeable uses of the components or systems.

The above disclaimer is being specically brought to the user’s attention and is in addition to and not in substitution to the Exclusions

and Limitations on Liability which are set out in the terms and conditions of sale.

www.comoso.com

Fan Control Application

HA502134U002 Issue 2



All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any form or by any means to persons not employed by a Parker Hannifin

Manufacturing Limited company without written permission from Parker Hannifin Manufacturing Ltd. Although every effort has been taken to ensure the accuracy of this document it

may be necessary, without notice, to make amendments or correct omissions. Parker Hannifin Manufacturing Limited cannot accept responsibility for damage, injury, or expenses

resulting therefrom.

WARRANTY

Refer to Parker Hannifin Manufacturing Limited Terms and Conditions of Sale. These documents are available on request at www.parker.com.

Parker Hannifin Manufacturing Limited reserves the right to change the content and product specification without notice.

www.comoso.com

2Fan Control Application Manual

AC30V series Variable Speed Drive

Fan Control Application Manual

Description

The fan application provides speed control using a speed reference from either an analogue input terminal, a preset speed selected by digital

terminals or, if a Real Time Clock (RTC) option is fitted, a preset speed selected by built-in time of day / day of week programmer.

Features

•Automatic belt breakage detection (abnormal load)

•Timed run function. Start/stop events can be programmed with different running speeds.*

•Skip frequencies to enable resonant points on the fan to be avoided

•Fire Mode. Run to destruction if commanded to do so.

•Preset speeds

•Power-up start

•Auto Start on non-zero setpoint

•Separate Manual Run and Auto Run digital inputs

•Catching a spinning load when fan is free-wheeling

* 7004-01-00 or 7004-03-00 option required

Requirements

To use the AC30V for fan control as described in this manual, the application RA502134U002 must be loaded into an AC30V series drive with

firmware 1.3.2 or newer.

www.comoso.com

Fan Control Application Manual 3

AC30V series Variable Speed Drive

www.comoso.com

4Fan Control Application Manual

AC30V series Variable Speed Drive

Inputs Terminal Function Comment

ANIN 01 (X11/01)

SPEED SETPOINT

Speed Reference used when MANUAL RUN

ANIN 02 (X11/02)

Not used

DIGIN 01 (X13/02)

MANUAL RUN*

Run command for using the Analog Input as Setpoint

DIGIN 02 (X13/03)

AUTO RUN*

Run command for using the selected Preset Speed as Setpoint

DIGIN 03 (X13/04)

PRESET SELECT 1

These 3 digital input select the active Preset Speed if the Time Of Day Timer

feature is not being used

DIGIN 04 (X12/01)

PRESET SELECT 2

DIGIN 05 (X12/02)

PRESET SELECT 3

DIGIN 06 (X12/03)

NOT COAST STOP

When FALSE the Drive does not control Fan. The Fan will freewheel.

DIGIN 07 (X12/04)

NOT FIRE MODE

When FALSE activates Fire Mode

* If both Run inputs are TRUE, than MANUAL RUN has the highest priority.

www.comoso.com

Fan Control Application Manual 5

AC30V series Variable Speed Drive

Outputs Terminal Function Comment

ANOUT 01 (X11/03)

FAN SPEED DEMAND

Speed demand as % of maximum Fan speed

ANOUT 02 (X11/04)

FAN LOAD

Calculated fan load as % of maximum fan load

RELAY 01

(X14/01 & X14/02)

RUNNING When closed the Fan is being driven

RELAY 02

(X14/03 & X14/04)

NOT TRIPPED When closed the Drive is not tripped

DIGOUT 01 (X12/01)

Terminal used as DIGIN 04

DIGOUT 02 (X12/02)

Terminal used as DIGIN 05

DIGOUT 03 (X12/03)

Terminal used as DIGIN 06

DIGOUT 04 (X12/04)

Terminal used as DIGIN 07

RELAY 11

(X23/01 & X23/02)

FIRE MODE ACTIVATED When closed Fire Mode is currently Activated

RELAY 12

(X23/03 & X23/04)

FIRE MODE READY When closed Fire Mode is Ready for Activation

DIGOUT 11 (X20/01)

LOAD WARNING

Abnormal load detection low warning (belt slipping)

DIGOUT 12 (X20/02)

LOAD FAULT

Abnormal load detection low fault (belt broken)

DIGOUT 13 (X20/03)

Not used

DIGOUT 14 (X20/03)

Not used

www.comoso.com

6Fan Control Application Manual

AC30V series Variable Speed Drive

Graphical Keypad (GKP) Application Customisation

The fan application adds parameters and menus to the GKP. It also modifies behavior of the and set-up wizard.

Wizard

Under Quick Setup Application:

1960: Power Up Start

1958: Use Auto Timer

1959: Run When Non Zero SP

1962: Fire Mode Level

1961: Fire Mode Setpoint

2038: Setpoint Input Max

2039: Setpoint Input Min

Quick Setup

0486: Acceleration Time

0487: Deceleration Time

1916: Preset Speed 0

1917: Preset Speed 1

1918: Preset Speed 2

1919: Preset Speed 3

1920: Preset Speed 4

1921: Preset Speed 5

1922: Preset Speed 6

1923: Preset Speed 7

1958: Use Auto Timer

1959: Run When Non Zero SP

1006: Run Setup?

1141: View Level

www.comoso.com

Fan Control Application Manual 7

AC30V series Variable Speed Drive

Quick Monitor

1997: Load Monitor State

0682: Reference

1924: Selected Preset

0500: Ramp Speed Output

0399: Actual Torque

1964: Fire Mode Activated

1965: Fire Mode Ready

Setup::Application and Monitor::Application

Include all parameters listed in the table at the end of this manual.

www.comoso.com

8Fan Control Application Manual

AC30V series Variable Speed Drive

Abnormal Load Detect

Setup::Application::Abnormal Load Detect

Monitor::Application::Abnormal Load Detect*

When used in the Fan Control Application this feature is used to detect low load indicating belt break or belt slip.

PNO

Parameter Descriptions

1968 Enable Load Monitor

Set TRUE to enable this feature.

1969 Startup Delay

This sets the duration from when the motor is started until the load monitoring is started. This allows for inaccurate speed/load

characterisation and load estimation during start-up period.

1970 Fault Delay

This sets the duration from when the load monitor detects a LOAD FAULT until the sequencers stops the motor. This allows for

inaccurate speed/load characterisation and load estimation during start-up period.

1973 Low Warning Level

This specifies the deviation of the actual load below the expected load which will cause a LOAD LOW WARNING to be reported.

1974Low Fault Level

This specifies the deviation of the actual load below the expected load which will cause a LOAD LOW FAULT to be reported.

1976

1977

1978

1979

Speed 1

Speed 2

Speed 3

Speed 4

These 4 parameters specify together with the 4 Load parameters below are used to characterise the expected load ‘curve’ for the

actual Speed.

1987

1988

1989

1990

Load 1

Load 2

Load 3

Load 4

See above Speed parameters.

www.comoso.com

Otros manuales para AC30V Series

Tabla de contenidos

Otros manuales de Controladores de Parker

Parker

Parker 690+ series Manual de usuario

Parker

Parker ACR8000 Manual de usuario

Parker

Parker A4WO Manual de usuario

Parker

Parker AC890PX Series Manual de instrucciones

Parker

Parker Hauser COMPAX-M Series Manual de usuario

Parker

Parker ADAPTOMODE A4AO Guía

Parker

Parker A4W Series Instrucciones de funcionamiento e instalación

Parker

Parker 650V series Manual de usuario

Parker

Parker ER032 Hoja de datos

Parker

Parker Lucifer EPP4 Series Instrucciones de uso

Parker

Parker 6K Series Manual

Parker

Parker Compax3 Fluid T40 Manual de usuario

Parker

Parker ACR7000 Series Manual de usuario

Parker

Parker ADAPTOMODE A4A Series Guía

Parker

Parker 890CS Manual de usuario

Parker

Parker Compumotor 6000 Series Manual de usuario

Parker

Parker AC30V Series Manual de usuario

Parker

Parker HAUSER HPLA Series Manual de usuario

Parker

Parker ADAPTOMODE A4AS Guía

Parker

Parker 890 Series Manual de instrucciones

Parker

Parker Sporlan S3C Manual de usuario

Parker

Parker A4AT-DN Instrucciones de funcionamiento e instalación

Parker

Parker CHELSEA Manual de usuario

Parker

Parker XLR Series Hoja de datos

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario