Parker D31FBxEE Series Manual de usuario
Bulletin MSG11-5715-706/UK
Pilot Operated
Proportional DC Valve
Operating instructions
Series D*1FB*EE
Design series 13
II 2 G c T4 Gb
-20 °C ≤Ta≤+40 °C
D*1FB*EEXG371
-20 °C ≤Ta≤+60 °C
Parker Hannifin
Manufacturing Germany GmbH & Co. KG
Industrial Systems Division Europe
Gutenbergstr. 38
41564 Kaarst, Germany
Tel.: (+49) 181 99 44 43 0
E-mail: valvesisde@parker.com
Copyright © 2018, Parker Hannifin Corp.
2
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
WARNING - USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection
of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects
of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
system options based upon data or specifications provided by the user, the user is responsible for
determining that such data and specifications are suitable and sufficient for all applications and
reasonably foreseeable uses of the components or systems.
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
3Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
Contents Page
0. EC declaration of conformity 4
1. Introduction 8
Ordering code 9
Technical data 10
Characteristic curves 11
Pilot oil 12
Dimensions 13
Name plate 15
2. Safety instructions 15
Symbols 15
Marking, name plates 15
Work on the valve 15
3. Important information 16
Correct use 16
Common instructions 16
Liability 16
Storage 16
4. Installation 17
Scope of delivery 17
Installation 17
Electrical connection 17
Operation limits 17
Pressure fluids 17
5. Operating instructions 20
Electronic control system 20
Air bleeding of hydraulic system 20
Filter 20
Flushing 20
6. Maintenance 20
Coil replacement 20
7. Troubleshooting 22
A1 Extract from standards/directives 23
A2 User guide – Solenoid 25
A3 Type-examination certificate – Solenoid 26
A4 Declaration of conformity – Solenoid 40
A5 Mounting instruction cable gland 41
4
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
0. EC declarations of conformity
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
5Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
6
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
7Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
8
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
1. Introduction
The new series of pilot operated proportional direc-
tional valves D*1FB*EE comes in 4 sizes:
D31FB*EE – NG10 (CETOP 05)
D41FB*EE – NG16 (CETOP 07)
D91FB*EE – NG25 (CETOP 08)
D111FB*EE – NG32 (CETOP 10)
The D*1FB*EE series with explosion proof so-
lenoids is based on the standard D*1FB series.
The specific solenoid design allows the usage in
hazardous environments.
The explosion proof class is
Ex e mb IIC T4 Gb
for use in zone 1 and 2 (conform to ATEX).
Additionally the solenoids are IECEx compliant.
The parameters can be saved, changed and dupli-
cated in combination with the digital power ampli-
fier PWD00A-400 (to be used in an explosion proof
cabinet or outside of the hazardous area).
The valve parameters can be edited with the com-
mon ProPxD software.
Features
• Progressive flow characteristics for sensitive
adjustment of flow rate
• High flow capacity
• Optional: coil to permit ambient temperature up
to +60 °C, modification XG371
D31FB
D91FB*EE
D91FB D111FB
D91VW
D41FB
a 0 b
A B
PT
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
9Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
Ordering code
Code Spool type
E01
E02
B31
QB= QA /2
B32
QB= QA /2
Code Spool position
C
E
K
Code Seals
N NBR
V FPM
Code Nominal size
3 NG10 / CETOP 05
4 NG16 / CETOP 07
9 1) NG25 / CETOP 08
11 NG32 / CETOP 10
Code Flow [l/min]
at Dp = 5 bar per metering edge
D31 D41 D91 D111
B – 100 2) – –
C 75 2) 130 2) – –
D 90 – – –
E 120 – 250 2) –
F – 200 – –
H – – 400 –
L – – – 1000
Code Inlet Drain
1 Internal External
2 External External
4 Internal Internal
5 External Internal
1) With enlarged connections Ø 32 mm
2) Not for spool type B31 and B32
DC
valve
Flow Valve
accessories
Solenoid
description
Pilot
connection
Dynamics
standard
NG06
pilot
Spool
type
Size Design
series
(not required
for ordering)
SealProportional
control
Spool
position
Explosion
proof
Connection
Explosion proof
with cable glands
Ex e mb IIC T4 Gb
+ IECEx
conformity
B1 F E 0D EE
Modi-
fication
Code Modification
omit Standard
XG371 Coil to permit ambient
temperature up to +60 °C
Code Solenoid
description
K 12 V / 2.3 A
J 24 V / 1.15 A
J*XG371 24 V / 1.0 A
10
Pilot Operated Proportional DC Valve
Series D*1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D_1FB-EE 5715-706UK.indd 11.01.19
Technical data
General
Design Pilot operated DC valve
Actuation Proportional solenoid
Size NG10 (CETOP05) NG16 (CETOP07) NG25 (CETOP08) NG32 (CETOP10)
Mounting interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPA
Mounting position unrestriced
Ambient temperature [°C] -20...+40; XG371: -20...+60
MTTFDvalue [years] 75
Weight [kg] 9.4 12.8 20.3 69.3
Hydraulic
Max. operating pressure [bar]
[bar]
Pilot drain internal: P, A, B, X 350; T, Y 185
Pilot drain external: P, A, B, T, X 350; Y 185
Fluid Hydraulic oil as per DIN 51524...535, other on request
Fluid temperature [°C] -20...+40; XG371: -20...+60
Viscosity
permitted [cSt] /
recommended [cSt] /
[mm2/s]
[mm2/s]
20...400
30...80
Filtration ISO 4406; 18/16/13
Nominal flow at Dp=5 bar
per control edge * [l/min] 75/90/120 130/200 250/400 1000
Leakage at 100 bar [ml/min] 100 200 600 1000
Pilot supply pressure [bar]
[bar]
min. 30 (+ T/Y pressure), max. 350
optimal dynamics at 50
Pilot flow at 100bar [l/min] <0.5 <1.2 <1.2 <1.2
Pilot flow, step response [l/min] 2.0 1.9 4.5 18
Static / Dynamic
Step response at 100% step [ms] 50 75 100 180
Hysteresis [%] <5
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
* Flow rate for different Dp per control edge: Qx= QNom. · √Dpx
DpNom.
Electrical characteristics
Duty ratio [%] 100
Protection class , Ex e mb IIC T4 Gb, IP66 (plugged and mounted correctly)
Solenoid Code K J J*XG371
Supply voltage [V] 12 24 24
Current consumption [A] 2.3 1.15 1.0
Resistance [Ohm] 3.0 12.0 12.0
Solenoid connection Box with M20x1.5 entry for cableglands. Solenoid identificationas per ISO 9461.
Wiring min. [mm²] 3 x 1.5 recommended
Wiring lenght max. [m] 50 recommended
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Unidad de control de Parker
Parker
Parker D1FB EE Series Manual de usuario
Parker
Parker D1FV EE Series Manual de usuario
Parker
Parker PID00A-40X Series Manual de usuario
Parker
Parker CK5-DN Manual de usuario
Parker
Parker GC Series Guía del usuario
Parker
Parker 7121Z028 Instrucciones de montaje
Parker
Parker IOTA ONE Series Manual de usuario
Parker
Parker TFP Series Manual de usuario
Parker
Parker TPQ Series Manual de usuario
Parker
Parker PA Series Instrucciones de montaje
Parker
Parker PWD Series Manual de usuario
Parker
Parker TDP Series Manual de usuario
Parker
Parker 8902/LS Manual de usuario
Parker
Parker Vansco VMM1210 Manual de usuario
Parker
Parker SciLog DINCon Instrucciones de montaje
Parker
Parker C2 Series Instrucciones de instalación y mantenimiento
Parker
Parker 20K Manual de usuario
Parker
Parker PA Series Instrucciones de montaje
Parker
Parker PACHC Series Manual de usuario
Parker
Parker PID00A-40 Series Manual de usuario
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
