Paradox Paradox Digiplex DGP-610 Manual de usuario
Digiplex LED Keypads
User’s Manual
TABLE OF CONTENTS
INTRODUCTION .......................................................6
1.1 Legend ....................................................................6
BASIC OPERATION .................................................7
2.1 Auditory Feedback (Beep Tones) ...........................8
2.2 Keypad Indicator Lights .........................................8
2.3 LED Keypads ..........................................................8
2.4 Partitioned System..................................................10
2.5 Area Status Display ...............................................11
ARMING ...................................................................12
3.1 Exit Delay Timer ...................................................12
3.2 Regular Arming .....................................................12
3.3 Stay Arming ...........................................................13
3.4 Instant Arming .......................................................14
3.5 Force Arming .........................................................15
3.6 One-Touch Buttons ................................................16
3.7 Keyswitch Arming .................................................17
3.8 Auto-Arming ..........................................................18
3.9 Bypass Programming .............................................19
DISARMING .............................................................22
4.1 Entry Delay Timer .................................................22
4.2 Disarming an Armed System .................................22
4.3 Alarm Memory Display .........................................24
ACCESS CODES .....................................................25
5.1 Keypad Lock-out.....................................................25
5.2 Erasing Access Codes.............................................25
5.3 System Master Code ..............................................25
5.4 User Access Codes .................................................27
TROUBLE DISPLAY ................................................32
ADDITIONAL FEATURES .......................................38
7.1 Panic Alarms ..........................................................38
7.2 Programming Chime Zones ...................................39
7.3 Quick Function Buttons .........................................41
7.4 Programmable Outputs (PGMs) .............................41
FIRE AND BURGLAR ALARMS .............................42
8.1 Standard Fire Zone .................................................42
8.2 Delayed Fire Zone ..................................................42
8.3 Fire Safety Tips...................................................... 44
8.4 Minimizing Home Fire Hazards ............................45
8.5 Burglar Alarm ........................................................45
TESTING AND MAINTENANCE ..............................46
9.1 Burglar Alarm Testing ...........................................46
9.2 Fire Alarm Testing .................................................46
9.3 System Maintenance ..............................................46
9.4 System Test ............................................................47
SYSTEM CHECKLIST .............................................48
10.1 Zone Description .................................................48
10.2 Access Codes .......................................................51
10.3 Special Buttons and Features ...............................55
10.4 Other Information ................................................56
6User’s Manual
1.0 INTRODUCTION
Your Digiplex™ Security System is an advanced technology security
system that will provide you with reliable security protection and powerful
features that are easy to use.
Since you will communicate your instructions to your system through the
keypad, please read this manual carefully and have your installer explain
basic system operation.
1.1 LEGEND
Indicates a warning or an important note.
Indicates useful information or tip.
[WORD]
[NUMBER] Indicates information that must be entered on the keypad.
Italics Indicates references to features, options or sections.
Digiplex LED Keypads 7
2.0 BASIC OPERATION
Your security system communicates by illuminating the “AC” Light, the “Status”
Light, and the various symbols on the screen as explained in Figure 2-1.
Figure 2-1: Basic Overview
8User’s Manual
2.1 AUDITORY FEEDBACK (BEEP TONES)
When you enter information on the keypad, the keypad will guide you with
beep tones to communicate acceptance or rejection of your entries.
Confirmation Beep: When an operation (i.e. arming/disarming) is
successfully entered or when the system switches to a new status/menu, the
keypad emits an intermittent beep tone (“BEEP-BEEP-BEEP-BEEP-BEEP”).
Half Beep: When a step of an operation is successfully entered on the
keypad, the keypad emits a short intermittent beep tone (“BEEP-BEEP-BEEP”).
Rejection Beep: When reverting to a previous status, or when an operation
is incorrectly entered, the keypad emits a continuous beep (“BEEEEEEEEP”).
2.2 KEYPAD INDICATOR LIGHTS
On all Digiplex LED Keypads, the state of the “STATUS”, “AC” Lights, and Action
Symbols (see Figure 2-1 page 7) represents a specific condition in your system.
2.3 LED KEYPADS
There are three versions of the LED Keypads: the 10-zone, the 20-zone,
and the 48-zone keypads. Each keypad can be assigned to one area or
many areas in a Partitioned System. The three keypads function in the
same way and any reference to one keypad applies to each of the LED
Keypads. The only difference between the versions is the number of zones
that each can display.
Digiplex LED Keypads 9
2.3.1 Normal Mode
When no actions are being performed on the keypad, the keypad will remain in
Normal Mode. In Normal mode the LED keypad will illuminate:
• The “AC” Light if power is present
• The Numerical Symbols representing any open zones
• The Area Symbols if any areas are armed
• The [MEM]Symbol if any alarms have occurred
• The [TRBL]Symbol if any troubles are occurring
• The [BYP]Symbol if zones are bypassed
and show the status of the “Status” Light (see Figure 2-1,page 7)
2.3.2 Confidential Mode
The installer can program the keypads not to display the status of your system
automatically by changing the LED keypad from Normal Mode to Confidential
Mode. In Confidential Mode all the Symbols and Keypad Indicator Lights are
extinguished. Depending on how your keypad was programmed by the
installer, you must either press a button or enter your User Access Code to
activate Normal Mode.
2.3.3 Multiple-action
If your installer has enabled this feature, the LED Keypad will permit you to
complete more than one action without having to re-enter your User
Access Code. Press the button to exit the User Menu.
10 User’s Manual
2.3.4 Backlight
The illumination behind the buttons can be modified to suit your needs.
2.4 PARTITIONED SYSTEM
Your installer can design your system to recognize up to four separate
protected areas. A separated system is called a Partitioned System, which
can be useful in situations where shared security systems are more
practical. For example, a company that has both an office area and a
warehouse area can arm and disarm each area separately and control the
access to each area. Therefore, one person may have access to only one
area, whereas another person may have access to all areas. Access to the
areas is determined by the User Access Code.
How do I modify the Backlight?
1) Enter your [ACCESS CODE].
The keypad will emit a Confirmation Beep. The [ACCESS] Symbol will flash.
2) Press the button.
The keypad will emit a Confirmation Beep, the [PRG] Symbol will illuminate,
and the Numerical Symbol for the current setting will illuminate.
3) Use the and buttons to increase or decrease the illumination.
The range is between zero (Numerical Symbol [10]) and seven (Numerical
Symbol [7]) with seven being the brightest.
4) Press the button to save and exit.
Digiplex LED Keypads 11
2.5 AREA STATUS DISPLAY
In Area Status Display you will be able to see the status of the individual
areas in a Partitioned System (see section 2.4).
In Area Status Display the following will illuminate for the area selected:
• The Area Symbol (A1, A2, A3, and A4) if the area is armed. For example,
if you press , and Area 3 is armed, [A3] will illuminate.
• The Numerical Symbols representing any open zones. For example, if
zone 6 was open, then the Numerical Symbol [6] would illuminate.
•The [MEM]Symbol if any alarms have occurred
•The [TRBL]Symbol if any troubles are occurring
•The [STAY]Symbol if the area is Stay or Instant Armed
•The [FORCE]Symbol if the area is Force Armed
•The [BYP]Symbol if zones are bypassed
•The state of the “Status” Light
How do I see the status of the zones?
1) Enter your [ACCESS CODE]
2) Press the numbered button corresponding to the desired area:
= Area 1 = Area 3
= Area 2 = Area 4
3) The keypad will emit a Confirmation Beep and will remain that Area’s
status for two minutes then return to Normal or Confidential Mode. You
can perform the next desired action from Area Status Display.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Teclado de Paradox
Paradox
Paradox TM40 Manual de usuario
Paradox
Paradox Esprit 636 Manual de usuario
Paradox
Paradox K32LCD+ Manual de usuario
Paradox
Paradox Grafica DNE-K07 Instrucciones de funcionamiento
Paradox
Paradox Esprit 639 Manual de usuario
Paradox
Paradox Spectra 1641 Instrucciones de montaje
Paradox
Paradox Digiplex Manual de usuario
Paradox
Paradox Imperial Digiplex Evo R915 Manual de usuario
Paradox
Paradox DGP2-641 Guía del usuario
Paradox
Paradox K32LCD+ Manual de usuario
Paradox
Paradox Magellan K636 Manual de usuario
Paradox
Paradox Spectra 1641 Manual de usuario
Paradox
Paradox REM3 Manual de usuario
Paradox
Paradox K32+ Manual de usuario
Paradox
Paradox Esprit 616 Manual de usuario
Paradox
Paradox Grafica Manual de usuario
Paradox
Paradox Spectra 1689 Manual de usuario
Paradox
Paradox TM50 Touch Manual de usuario
Paradox
Paradox Spectra 1689 Manual de usuario
Paradox
Paradox 1686V Manual de usuario
