Aritech CS-175 Series Manual de usuario
CS-175-275-575 Series
LCD User Guide
98/482/EC Declaration
(Applies to products that have CE mark attached)
This equipment has been approved in accordance with Council Decision 98/ 82/EC for Pan-European single
terminal connection to the public switched telephone network (PSTN). However, due to differences between
the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination point.
Aritech is an Interlogix company.
© 2001 Interlogix B.V.
All rights reserved. Interlogix B.V. grants the right to reprint this manual for internal use only.
Interlogix B.V. reserves the right to change information without notice.
3CS-175-275-575 Series • LCD User Guide
Contents
LCD keypad ........................................................... 4
Preparing your syste .......................................... 6
Turning on your syste ......................................... 7
Turning off your syste ........................................ 8
Turning off your syste in case of alar .............. 9
Bypassing (excluding) one or ore zones............ 10
Life safety functions ............................................ 12
Resetting fire detectors ....................................... 13
Changing user codes........................................... 14
Deleting user codes............................................. 15
Setting the keypad tone ..................................... 16
Setting the syste clock ..................................... 17
Viewing zone status ........................................... 19
Viewing alar e ory ...................................... 20
Reading the event log ........................................ 21
Adjusting view/brightness
of the LCD (text display) ..................................... 22
Service essages display .................................... 23
Glossary of ter s ............................................... 26
CS-175-275-575 Series • LCD User Guide 4
LCD keypad
Power (green): When lit, the
system is connected to the mains
power.
Stay: Press to arm perimeter
protection when on the premises.
Bypass: Press to bypass (exclude) a
zone (or zones) in the event of a
zone fault.
Navigation: Press to scroll through
menu on LCD display.
Star: Used to enable certain
functions.
Ready (green): When lit, the
system is ready to be turned on.
ire (red): When lit, the fire zone
has been activated.
LCD display: Messages.
Away: Press to arm complete
system when leaving the premises.
Chime: Press to turn the chime on
and off.
5CS-175-275-575 Series • LCD User Guide
LCD keypad
aPower (green). The power light is on if the system is
connected to the mains and if the battery is okay. The
power light will flash if the system has a low battery condition
or when the battery is not connected. The power light is off if
the mains is cut.
bReady (green). The ready LED is on when the system is
ready to arm, and flashes when the system is ready to
force arm. If the LED is off, the system cannot be armed,
generally because there is a zone fault.
cFire (red). When the fire LED is lit, a fire zone has been
activated. A rapidly flashing fire LED means that there is a
problem with the fire zone.
gStay. This function key part arms your system. Pressing it
disarms all interior zones but leaves the perimeter
protected.
hAway. Press to arm all zones before leaving.
iBypass. Press to bypass (exclude) zones.
jkNavigation keys. These allow you to scroll
through lists and options on the LCD display.
lChime. Press to turn the chime on and off.
@Hash key. Used to access modules and locations.
$Star. Used to access tasks and enter data.
6CS-175-275-575 Series • LCD User Guide
Preparing your system
LCD Message: Your system is NOT ready to be turned on,
doors or windows might be open.
User Action: Use the up/down arrow.
LCD Message: Zone information.
User Action: Press the bypass key if you want to bypass (exclude)
a zone, so you can arm part of your system.
LCD Message: Zone information.
User Action: Press #.
LCD Message: Your system is ready to be turned on.
System Not Ready
For help, press
System Ready
Type code to arm
jor k S
i S
@ S
X Fault
Zone X
X Bypass
Zone X
or
X Fault Bypass
Zone X
X Okay
Zone X
or
7CS-175-275-575 Series • LCD User Guide
Turning on your system
LCD Message: Your system is ready to be turned on.
User Action: For stay mode, push the stay button,
for away mode push the away button.
LCD Message: Your system is either protected
partially or completely.
LCD Message: Your system is ready to be turned on.
User Action: Type your user code for arming.
LCD Message: Your system is turned on.
OPTION 1: Using the function keys (This feature must be programmed by the installer.)
e S
System Ready
Type code to arm
System Armed
All Zones Secure
System Ready
Type code to arm
OPTION 2: Typing your user code
g S h S
System Armed
Zone(s) Bypassed
System Armed
All Zones Secure
or
8CS-175-275-575 Series • LCD User Guide
Turning off your system
LCD Message:Your system is turned on.
User Action: Type your user code to turn off your system.
System Armed
All Zones Secure
e S
System Ready
Type code to arm LCD Message: Your system is ready to be turned on.
9CS-175-275-575 Series • LCD User Guide
Turning off your system in case of alarm
User Action: Type your user code to turn off your system.
LCD Message: The last alarm is shown on the LCD message
for verification.
User Action: Press #to leave this LCD message.
LCD Message: Your system is ready to be turned on.
X Alarm Mem.
Zone X
System Ready
Type code to arm
ALARM Zone X
e S
LCD Message: An alarm has occurred in zone X.
@ S
10CS-175-275-575 Series • LCD User Guide
Bypassing (excluding) one or more zones
LCD Message: Your system is NOT ready to be turned on.
User Action: Use the up/down arrow.
LCD Message: Shows the state of the first zone.
User Action: Use the up/down arrow.
LCD Message: Zone information.
User Action: Press the bypass key to toggle
between ‘Okay’ and ‘Bypass’.
or LCD Message: Zone information.
User Action: Press #to exit this menu.
System Not Ready
For help, press
2 Bypass
Zone 2
@ S
2 Okay
Zone 2
jk S
jk S
i S
1 Okay
Zone 1
2 Okay
Zone 2
2 Bypass
Zone 2
or
Otros manuales para CS-175 Series
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Teclado de Aritech
Aritech
Aritech CS450 Manual de usuario
Aritech
Aritech ATS4000 Manual de usuario
Aritech
Aritech CS-175-275-575 Series Manual de usuario
Aritech
Aritech ATS1155 Manual de usuario
Aritech
Aritech ACL805SUW-RDPX Instrucciones de montaje
Aritech
Aritech ATS1136 Instrucciones de montaje
Aritech
Aritech ACL599 Manual del propietario
Aritech
Aritech ATS1135 Instrucciones de montaje
Aritech
Aritech ATS111-N Series Instrucciones de montaje
Aritech
Aritech ATS1110 Manual de usuario
