Panduit BT2HT Manual de usuario

E-mail:

[email protected]

Technical upport:

1-800-777-3300

FIGURE 1

Page: 1 of 4

INTRODUCTION

The BT2HT Tool installs Panduit Pan-Steel coated and

uncoated S Series strap and buckles in widths of 3/8” X

.015” thick (9.5mm), 1/2” X .015” thick (12.7mm); and 5/8” X

.015” and .025” thick (15.9mm).

Note: This tool is not intended for other uses such as cutting

or tensioning other types of fastening devices.

TOOL FEATURE

A. Rear Handle

B.* Tension Pawl Release - Knob pointing towards the front

of tool for pawl engagement and to rear of tool for disen-

gagement.

C.* Anti-Backup Pawl Release - Lever up against tool for

pawl engagement and pulled down to disengage pawl.

D.* Detent Lock Pins - For controlled tension, pull both pins

forward; for manual tension, push both pins backward.

E. Cutter Handle - Cuts tie when strap is tensioned properly.

F. Cutter Blade

G. Tensioning andrel

H.* Tension Indicator Window - Located on the back of front

handle.

I.* Adjustment Knob - Adjust tension of strap application.

J. Tension Locking Set Screw

K. Front Handle - With ratchet controlled tensioning.

* ee Page 2 for Feature Detail

FIGURE 2

TOOL OPERATION

ee teps 1 - 8 on Pages 3 and 4.

PA25758A01

Rev: 03 5-2017

M TRAPPING TOOL OPERATION IN TRUCTION

BT2HT

www.panduit.com

Page: 2 of 4

PU H BACKWARD

FOR ANUAL

TENSION

PULL FORWARD

FOR CONTROLLED

TENSION

TROUBLE HOOTING

TO RELEASE AND RE OVE STRAP

FRO TOOL BEFORE CUTTING,

DISENGAGE BOTH KNOB AND LEVER.

ULTI-POSITION HANDLE

ALLOWS ACCESS TO TIGHT AREAS.

TOOL MAINTENANCE

TO INHIBIT CORROSION AND AINTAIN PERFOR ANCE OF THE TOOL, KEEP THE ETAL SURFACES COATED

WITH A LIGHT OIL (WD-40®OR EQUIVALENT).

BT2HT

Page: 3 of 4

TEP 1 TEP 2

Slide in buckle and bend the end of strap. Loop strap around bundle.

Thread strap into nose of tool

and through slot of tensioning mandrel.

TEP 3 TEP 4

Pull front handle to tension strap and rotate the tool

to touch the buckle (as shown).

Under controlled tension, the front handle will

break free when pre-determined tension is attained.

Push cutter lever downward to cut strap.

Remove cut-off portion of strap from tool.

BT2HT

Page: 4 of 4

TEP 5 TEP 6

Bend cut-off end of strap down. Position tab of the tool inside the buckle slot.

TEP 7 TEP 8

Bend the buckle lock down as shown. Strap correctly installed.

BT2HT

Otros manuales de Herramientas eléctricas de Panduit

Panduit

Panduit GTH Manual de usuario

Panduit

Panduit PBTMT Manual de usuario

Panduit

Panduit ST2MT Manual de usuario

Panduit

Panduit CT-720 Manual de usuario

Panduit

Panduit CP-881 Manual de usuario

Panduit

Panduit GS4EH Manual de usuario

Panduit

Panduit CT-1700 Manual de usuario

Panduit

Panduit PA24849A01 Manual de usuario

Panduit

Panduit GS2B Manual de usuario

Panduit

Panduit CT-400 Manual de usuario

Panduit

Panduit ST-100 Manual de usuario

Panduit

Panduit CT-2940 Series Manual de usuario

Panduit

Panduit CA-800EZ Manual de usuario

Panduit

Panduit CTFP-40 Manual de usuario

Panduit

Panduit RT2HT Manual de usuario

Panduit

Panduit CT-1090 Manual de instrucciones

Panduit

Panduit PTS Manual de usuario

Panduit

Panduit CT-2980/L Manual de usuario

Panduit

Panduit PDM Manual de usuario

Panduit

Panduit CT-260 Manual de usuario

Panduit

Panduit BlackFin CT-2920 CCP Series Manual de usuario

Panduit

Panduit CT-1701 Manual de usuario

Panduit

Panduit CP-881/E Manual de usuario

Panduit

Panduit CT-1525 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual