Panduit RT2HT Manual de usuario

E-mail:

[email protected]

For Technical Support:

1-800-777-3300

RT2HT

MLT TENSIONING TOOL OPERATION INSTRUCTIONS

INTRODUCTION

The RT2HT Tool installs anduit an-Steel coated and

uncoated MLTEH (Extra Heavy Cross Section), MLTEH15

(Extra Heavy Cross Section .015” Thick Body), and

MLTSH (Super Heavy Cross Section .015” and .025”

Thick Body) stainless steel ties.

Note: This tool is not intended for other uses such as

cutting or tensioning other types of fastening

devices.

TOOL FEATURES

A. Rear Handle

B.* Tension awl Release - Knob pointing towards the front

of tool for pawl engagement and to rear of tool for

disengagement.

C.* Anti-Backup awl Release - Lever up against tool for

pawl engagement and pulled down to disengage pawl.

D.* Detent Lock ins - For controlled tension, pull both pins

forward; for manual tension, push both pins backward.

E. Cutter Handle - Cuts tie when tie is tensioned properly.

F. Cutter Blade

G. Tensioning Mandrel

H.* Tension Indicator Window - Located on the back of front

handle.

I.* Adjustment Knob - Adjust tension of tie application and

lock to desired tension with tension locking screw.

J. Tension Locking Screw

K. Front Handle - With ratchet controlled tensioning.

* See Page 2 for Feature Detail

FIGURE 1

TOOL OPERATION

1. Loop tie around bundle, thread tie into nose of tool and

through slot of tensioning mandrel.

2. ull front handle to tension tie. Under controlled tension,

the front handle will break free when pre-determined

tension is attained.

3. ush cutter lever downward to cut tie.

4. Remove cut-off portion of tie from tool.

A25757A01

Rev: 02 5-2017

FIGURE 2

age: 1 of 2

www.panduit.com

PUSH BACK ARD

FOR MANUAL

TENSION

PULL FOR ARD

FOR CONTROLLED

TENSION

TROUBLESHOOTING

TO RELEASE AND REMOVE TIE

FROM TOOL BEFORE CUTTING,

DISENGAGE BOTH KNOB AND

LEVER.

MULTI- OSITION HANDLE

ALLOWS ACCESS TO TIGHT AREAS.

TOOL MAINTENANCE

TO INHIBIT CORROSION AND MAINTAIN ERFORMANCE OF THE TOOL, KEE THE METAL SURFACES COATED

WITH A LIGHT OIL (WD-40®OR EQUIVALENT).

OPERATION INSTRUCTIONS

age: 2 of 2

RT2HT

Tabla de contenidos

Otros manuales de Herramientas eléctricas de Panduit

Panduit

Panduit CT-2980/L Manual de usuario

Panduit

Panduit GTH Manual de usuario

Panduit

Panduit PBTMT Manual de usuario

Panduit

Panduit CA-800EZ Manual de usuario

Panduit

Panduit BlackFin CT-2920 CCP Series Manual de usuario

Panduit

Panduit CT-1701 Manual de usuario

Panduit

Panduit CT-260 Manual de usuario

Panduit

Panduit CT-720 Manual de usuario

Panduit

Panduit BT2HT Manual de usuario

Panduit

Panduit GS2B Manual de usuario

Panduit

Panduit BlackFin CT-2980 Manual de usuario

Panduit

Panduit CP-881/E Manual de usuario

Panduit

Panduit GS4EH Manual de usuario

Panduit

Panduit PTS Manual de usuario

Panduit

Panduit ST2MT Manual de usuario

Panduit

Panduit PA24849A01 Manual de usuario

Panduit

Panduit CT-1700 Manual de usuario

Panduit

Panduit PN433 Manual de usuario

Panduit

Panduit CT-2930/L Manual de usuario

Panduit

Panduit GTH Manual de usuario

Panduit

Panduit ST-100 Manual de usuario

Panduit

Panduit CT-400 Manual de usuario

Panduit

Panduit CP-991 Manual de usuario

Panduit

Panduit CT-2940 Series Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual