Panasonic KX-TG4111CB Manual de usuario

Unauthorized copying and distribution is a violation

of law.

ORDER NO. KM41103329CE

Telephone Equipment

Model No. KX-TG4111CB

KX-TG4112CN

KX-TG4113CB

KX-TG4114CB

KX-TGA410CB

KX-TGA410CN

Digital Cordless Phone

B: Black Version

N: Champagne Gold Version

(for Canada)

Call Display Compatible

Model No

Base Unit Handset

Charger Unit

Expandable

KX-TG4111

1 (TG4111) 1 (TGA410)

Up to 6

KX-TG4112

1 (TG4111) 2 (TGA410) 1

Up to 6

KX-TG4113

1 (TG4111) 3 (TGA410) 2

Up to 6

KX-TG4114

1 (TG4111) 4 (TGA410) 3

Up to 6

KX-TGA410

* 1 (TGA410) 1

Configuration for each model

Information for optional accessories

You can expand your phone system by registering optional

handsets (KX-TGA660C / KX-TGA659C) to a single base unit.

Optional handsets and the supplied handset are different model

so that some functions may not be available.

Refer to each Operating Instruction for details.

*KX-TGA410 is also an optional accessory, which contains a

handset and a charger.

(Handset)

KX-TGA410CB/CN KX-TG4111CB/CN

(Base Unit)

(Charger Unit)

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general

public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting

to service a product. Products powered by electricity should be serviced or repaired only by experienced professional

technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone

else could result in serious injury or death.

IMPORTANT SAFETY NOTICE

There are special components used in this equipment which are important for safety. These parts are marked by

in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that

these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

Do not modify the original design without permission of manufacturer.

IMPORTANT INFORMATION ABOUT LEAD FREE, (PbF), SOLDERING

If lead free solder was used in the manufacture of this product, the printed circuit boards will be marked PbF.

Standard leaded, (Pb), solder can be used as usual on boards without the PbF mark.

When this mark does appear, please read and follow the special instructions described in this manual on the

use of PbF and how it might be permissible to use Pb solder during service and repair work.

LWhen you note the serial number, write down all 11 digits. The serial number may be found on the bottom of the unit.

LThe illustrations in this Service Manual may vary slightly from the actual product.

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

TABLE OF CONTENTS

PAGE

1 Safety Precautions----------------------------------------------- 4

1.1. For Service Technicians --------------------------------- 4

2 Warning -------------------------------------------------------------- 4

2.1. Battery Caution--------------------------------------------- 4

2.2. About Lead Free Solder (PbF: Pb free)-------------- 4

2.3. Discarding of P. C. Board-------------------------------- 5

3 Specifications ----------------------------------------------------- 6

4 Location of Controls and Components ------------------- 7

5 Installation Instructions ---------------------------------------- 7

6 Operating Instructions------------------------------------------ 7

7 Schematic Diagram ---------------------------------------------- 8

7.1. For Schematic Diagram---------------------------------- 8

7.2. Schematic Diagram (Base Unit_Main) --------------10

7.3. Schematic Diagram (Handset_Main) ----------------12

7.4. Schematic Diagram (Charger Unit) -----------------14

8 Exploded View and Replacement Parts List -----------15

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

1 Safety Precautions

1.1. For Service Technicians

•Repair service shall be provided in accordance with repair technology information such as service manual so as to

prevent fires, injury or electric shock, which can be caused by improper repair work.

1. When repair services are provided, neither the products nor their parts or members shall be remodeled.

2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.

3. FASTON terminals shall be plugged straight in and unplugged straight out.

•ICs and LSIs are vulnerable to static electricity.

When repairing, the following precautions will help prevent recurring malfunctions.

1. Cover plastic parts boxes with aluminum foil.

2. Ground the soldering irons.

3. Use a conductive mat on worktable.

4. Do not grasp IC or LSI pins with bare fingers.

2Warning

2.1. Battery Caution

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

2.2. About Lead Free Solder (PbF: Pb free)

Note:

In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that

contains lead.

We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),

Silver (Ag), and Copper (Cu).

This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair

work we suggest using the same type of solder.

Caution

• PbF solder has a melting point that is 50 °F ~ 70 °F (30 °C ~ 40 °C) higher than Pb solder. Please use a soldering iron with

temperature control and adjust it to 700 °F ± 20 °F (370 °C ± 10 °C).

• Exercise care while using higher temperature soldering irons.:

Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.

• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 °F (600 °C).

• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the

opposite side (See the figure below).

Component

Solder

Remove all of the

excess solder

(Slice View)

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

2.2.1. Suggested PbF Solder

There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper

(Sn+Ag+Cu), you can also use Tin and Copper (Sn+Cu), or Tin, Zinc, and Bismuth (Sn+Zn+Bi). Please check the

manufacturer's specific instructions for the melting points of their products and any precautions for using their product with other

materials.

The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3 mm, 0.6 mm and 1.0 mm.

2.3. Discarding of P. C. Board

When discarding P. C. Board, delete all personal information such as telephone directory and caller list or scrap P. C. Board.

0.3 mm X 100 g 0.6 mm X 100 g 1.0 mm X 100 g

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

3 Specifications

Note:

• Design and specifications are subject to change without notice.

Note for Service:

•Operation range: Up to 300 m outdoors, Up to 50 m indoors, depending on the condition.

•Analog telephone connection: Telephone Line

Power source

Receiving Method

Oscillation Method

Detecting Method

Tolerance of OSC Frequency

Modulation Method

ID Code

Ringer Equivalence No. (REN)

Dialing Mode

Redial

Speed Dialer

Power Consumption

Operating Conditions

Dimensions (H x W x D)

Mass (Weight)

AC Adaptor

(PNLV226Z, 120 V AC, 60 Hz)

Super Heterodyne

PLL synthesizer

Quadrature Discriminator

13.824 MHz ± 100 Hz

Frequency Modulation

40 bit

0.1

Standby: Approx. 0.7 W

Maximum: Approx. 3.5 W

0 °C - 40 °C (32 °F – 104 °F)

20 % – 80 % relative air humidity

(dry)

Approx. 77 mm × 126 mm × 90 mm

Approx. 140 g

Rechargeable Ni-MH battery

AAA (R03) size (1.2 V 550 mAh)

Super Heterodyne

PLL synthesizer

Quadrature Discriminator

13.824 MHz ±100 Hz

Frequency Modulation

40 bit

Tone (DTMF)/Pulse

Up to 48 digits

Up to 24 digits (Phonebook)

11 days at Standby,

13 hours at Talk

0 °C - 40 °C (32 °F – 104 °F)

20 % – 80 % relative air humidity

(dry)

Approx. 159

49 mm

Approx. 130 g

Base Unit Handset Charger

AC Adaptor

(PNLV226Z, 120 V AC, 60 Hz)

Standby: Approx 0.1 W

Maximum: Approx 2.0 W

0 °C - 40 °C (32 °F – 104 °F)

20 % – 80 % relative air humidity

(dry)

Approx. 43 mm × 73 mm × 76 mm

Approx. 50 g

Duplex procedure:

TDMA (Time Division Multiple Access)

Channel spacing:

1.728kHz

Bit rate:

1.152 kbit/s

Modulation:

GFSK (Gaussian Frequency Shift Keying)

RF transmission power:

115 mW (max)

Voice coding:

ADPCM 32 kbit/s

Tone (DTMF)/Pulse

Up to 48 digits

■

■Standard:

DECT 6.0 (Digital Enhanced Cordless

Telecommunications 6.0)

■Number of channels:

60 Duplex Channels

■Frequency range:

1.92 GHz to 1.93 GHz

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

4 Location of Controls and Components

Refer to the Operating Instructions.

Note:

You can download and refer to the Operating Instructions (Instruction book) on TSN Server.

5 Installation Instructions

Refer to the Operating Instructions.

Note:

You can download and refer to the Operating Instructions (Instruction book) on TSN Server.

6 Operating Instructions

Refer to the Operating Instructions.

Note:

You can download and refer to the Operating Instructions (Instruction book) on TSN Server.

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

7 Schematic Diagram

7.1. For Schematic Diagram

7.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

7.1.2. Handset (Schematic Diagram (Handset_Main))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.

2. The schematic diagrams may be modified at any time with the development of new technology.

7.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

Important Safety Notice:

Components identified by mark have special characteristics important for

safety. When replacing any of these components, use only the manufacture's

specified parts.

Important Safety Notice:

Components identified by mark have special characteristics important for

safety. When replacing any of these components, use only the manufacture's

specified parts.

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

Memo

KX-TG4111CB/KX-TG4112CN/KX-TG4113CB/KX-TG4114CB/KX-TGA410CB/KX-TGA410CN

7.2. Schematic Diagram (Base Unit_Main)

NC: No Components

JTAG_TMS

JTAG_TDI

JTAG_TDO

JTAG_TCK

JTAG_RTCK

JTAG_TDI

JTAG_TMS

JTAG_TCK

JTAG_RTCK

JTAG_TDO

URX

UTX

MSG_LED

ANS_LED

LCD_BLTR

LCD_BLTL

SPI2_CLK

SPI2_DO

LCD_CD

LCD_CS

LCD_RST

KEYS_E

KEYS_C

KEYIN2

KEYS_D

KEYIN3

KEYIN1

GND

RA502

10k

C859

2.2p

C825

10p

TXn

C663 NC

RA501 33

VBAT

GND

C826

10p

C811

10p

ANT1

C896

2.2p

GND

VDDC

SPP

C477 10p

STM/CKM/P15

C820

1.5p

CL1

C478 10p

GND

RXn

GND

DA802

C892

+3.0V

C810

2.4p

GND

ANT2

C515

K1u

GND

R891

470

C827

10p

RXn

LCD_BLT2

VBAT

GND

R807

470

GND

C518 0.1u

GND

R892

470

CL2

NC2

RXON

C813

GND

TXn

RSTN

C822

10p

GND

RXON

TXON

TXp

GND

C665 NC

GND

LCD_BLT1

RXp

GND

C664 NC

C863

1.5p

C662 NC

C806

2.7p

C812

0.9p

GND

+3.0V

ANT1

C891

L809

7.5n

ANT2

GND

R512

C517 0.1u

C661 NC

TXp

C895

1.2p

SPN

DA801

GND

C516 0.1u

C805

2.7p

GND

TXON

R806

470

RXp

LCD_CS

LCD_VDD

LCD_RST

LCD_CD

LCD_SCL

LCD_SIO

LCD_GND

*WBX02

AP1

10pin

PARALLEL WIRE

R502

TCK

URX

TDI

RTCK

TMS

UTX

TDO

UGND

C670

*WBX01

AP1

10pin

PARALLEL WIRE

C652 NC

*SW1

LOCATOR

KEYIN2

KEYS_C

C660 NC

KEYS_D

C653 NC

KEYS_E

C654 NC

ANS_LED

MSG_LED

LED_VDD

VBAT

C655 NC

KEYIN3

KEYIN1

C656 NC

C651 NC

L661 NC

L662 NC

L663 NC

L664 NC

*R651 NC

*R652 NC

L665 NC

+3.0V

*R507

*C666 NC

*Q651 NC

*Q652

D473 NC

D472 NC

A K

ANT1

ANT2

1 2 1 2

45 TXp

46 RXp

47 RXn

48 GND_RF

49 TRSW_p

50 ANT_n

51 ATST_n

52 ATST_p

53 TEST

54 RSTN

55 NC

56 VCC_VCO

57 GPIO[27]

58 VDDUSB

59 DM_USB/GPI28

60 DP_USB/GPI29

61 VDDC1

62 JTAG_TDO

63 JTAG_TDI

64 JTAG_TCK

65 JTAG_TMS

66 JTAG_RTCK

C894

10p

C893

10p

W 0.2mm

L mm

1st layer

W 0.2mm

L 10mm

1st layer

W 0.15mm

L 5.0mm

1st layer

W 0.2mm

L mm

1st layer

W 0.15mm

L 5.0mm

1st layer

W 0.15mm

L 20mm

3rd layer

TO RF BLOCK

W 0.2mm

L 10mm

1st layer

W 0.2mm

L 10.0mm

1st layer

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

* BBIC initialization

stand-by status

* When "SFR" command

is executed, 13.824MHz

frequency will be output.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema telefónico de Panasonic

Panasonic

Panasonic KX-TA1232 Manual de usuario

Panasonic

Panasonic KX-TD612CE Manual de usuario

Panasonic

Panasonic KX-NS700 Manual del propietario

Panasonic

Panasonic KX-TS105W Manual de usuario

Panasonic

Panasonic KX-TD816 Manual de usuario

Panasonic

Panasonic KX-TS20W Manual de usuario

Panasonic

Panasonic KX-TD612E Manual de usuario

Panasonic

Panasonic KX-TD816E Manual de usuario

Panasonic

Panasonic DBS Guía de inicio rápido

Panasonic

Panasonic KX -T61630 Manual de usuario

Panasonic

Panasonic KX-F3500 Manual de usuario

Panasonic

Panasonic Easa-Phone VA-30910 Manual de usuario

Panasonic

Panasonic KX-TD1232E Manual de usuario

Panasonic

Panasonic KX-TS208 Manual de usuario

Panasonic

Panasonic KX-TDA50 Manual de usuario

Panasonic

Panasonic KXT3250 - Integrated Telephone System Manual de usuario

Panasonic

Panasonic KX-TD208 Manual de usuario

Panasonic

Panasonic KX-TA1232 Manual de usuario

Panasonic

Panasonic KX-TS2388RUB Manual de usuario

Panasonic

Panasonic WX-CC2010 Series Manual de usuario

Panasonic

Panasonic KX-TSC11AGW Manual de usuario

Panasonic

Panasonic Easa-Phone KX-T3281W Manual de usuario

Panasonic

Panasonic KX-TDA5450 Manual de usuario

Panasonic

Panasonic KX-TS105W Manual de usuario

Manuales populares de Sistema telefónico de otras marcas

Teleco

Teleco Perfect Voice Tis 16 Manual de usuario

AT&T

AT&T Network Adapter 25 Manual de usuario

AVE

AVE AF902R-CE Manual de usuario

Tynetec

Tynetec Advent xt Manual de usuario

Ericsson

Ericsson DCT1800-S Manual de usuario

NEC

NEC Electra Elite 192 Manual de usuario

Alcatel

Alcatel EASY REFLEXES 4200 Manual de usuario

Bticino

Bticino PABX 28D Manual de usuario

NEC

NEC SL 2100 Manual de usuario

Sonifex

Sonifex Phone In 6 Manual de instrucciones

TransTel Communications

TransTel Communications TD-824i Instrucciones de montaje

Nortel

Nortel BCM50 Manual del producto

ASCOM

ASCOM TD 92375GB Manual del propietario

Karel

Karel MS26S Hoja de información del producto

EnGenius

EnGenius DuraFon PRO Manual de usuario

Teledat

Teledat X130 DSL Manual de usuario

SpectraLink

SpectraLink MOG400 Manual de usuario

LG-Nortel

LG-Nortel 300 Series Instrucciones de funcionamiento y seguridad