Panasonic KX-TD308 Manual de usuario

Thank you for purchasing this Panasonic Model

KX-TD308, Digital Super Hybrid System.

System Components

Service Unit

Telephone

Optional

Equipment

Model

KX-TD308

KX-T7220

KX-T7230

KX-T7235

KX-T7250

KX-T7130

KX-T7020

KX-T7030

KX-T7050

KX-T7055

KX-TD30870

KX-TD3089 1

____________________------

KX-T30865

Description

Digital Super Hybrid System (Main Unit)

Digital proprietary telephone

Digital proprietary telephone with display

Digital proprietary telephone with large display

Digital proprietary telephone

Proprietary telephone with display

Proprietary telephone

Proprietary telephone with display

Proprietary telephone

4-SLT Extension Expansion Card

Caller ID

DISA

FAX Detection Card

-------------------------------------------------------------

Doorphone

System Components Table

Attention

Keep the unit away from heating appliances and electrical noise generating devices such

as fluorescent lamps, motors and televisions. These noise sources can interfere with the

performance of the Digital Super Hybrid System.

This unit should be kept free of dust, moisture, high temperature (more than 40°C

104°F) and vibration, and should not be exposed to direct sunlight.

Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.

If there is any trouble, disconnect the unit from the telephone line. Plug the telephone

directly into the telephone line. If the telephone operates properly, do not reconnect the

unit to the line until the trouble has been repaired. If the telephone does not operate

properly, chances are that the trouble is in the telephone system, and not in the unit.

Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet.

Wipe it with a soft cloth.

WARNING

THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE

PERSONNEL.

WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS

BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD

IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.

DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THE

POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT, AND

RECONNECT THE POWER FIRST.

THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY

REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHING CONTACT

SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO REGULATIONS.

THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE,

ENSURE THAT THE SOCKET-OUTLET IS LOCATED

INSTALLED NEAR THE

EQUIPMENT AND IS EASILY ACCESSIBLE.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

The serial number of this product may be found on the label affixed to the bottom of

the unit.

You should note the model number and the serial number of this unit in the

space provided and retain this book as a permanent record of your purchase to aid in

identification in the event of theft.

MODEL NO.:

SERIALNO.:

Attention

When you ship the product

Carefully pack and send it prepaid, adequately insured and preferably in the original

carton. Attach a postage-paid letter, detailing the symptom, to the outside of the

carton. DO NOT send the product to the Executive or Regional Sales offices. They

are NOT equipped to make repairs.

Product service

Panasonic Servicenters for this product are listed in the servicenter directory. Consult

your authorized Panasonic dealer for detailed instructions.

DATE OF PURCHASE

NAME OF DEALER

DEALER’S ADDRESS

For your future reference

Important Safety Instructions

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury to

persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water, for example, near a bathtub, wash

bowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool.

5. Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided

for ventilation, to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked by

placing the product on the bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or heat

This product should not be placed in a built-in installation

unless proper ventilation is provided.

7. This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your dealer or local power

company.

8. This product is equipped with a three wire grounding type plug, a

plug having a third (grounding) pin. This plug will only fit into a

grounding type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose of the

grounding type plug.

9. Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be abused by people walking on it.

Important Safety Instructions

10. Do not overload wall outlets and extension cords as this can result in

the risk of fire or electric shock.

11.

Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock. Never spill liquid of

any kind on the product.

12. To reduce the risk of electric shock, do not disassemble this product,

but take it to a qualified serviceman when some service or repair

work is required. Opening or removing covers may expose you to

dangerous voltages or other risks. Incorrect reassembly can cause

electric shock when the appliance is subsequently used.

13. Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A.When

the power supply cord or plug is damaged or frayed.

B.If liquid has been spilled into the product.

C.If the product has been exposed to rain or water.

D.If

the product does not operate normally by following the

operating instructions. Adjust only those controls, that are

covered by the operating instructions because improper

adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the

product to normal operation.

E.If

the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance.

14. Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock from

lightning.

15. Do not use the telephone to report a gas leak in the vicinity of the

leak.

SAVE THESE INSTRUCTIONS

Telephone Company and F.C.C.

Requirements and Responsibilities

1. Notification to the Telephone Company

Customers, before connecting terminal equipment to the telephone network, shall

upon request of the Telephone Company, inform the Telephone Company of the

particular line(s) to which such connection is made, the F.C.C. registration number

(see the label on the bottom of the

.unit)

and ringer equivalence number (REN) of the

registered terminal equipment.

The REN is useful in determining the quantity of devices you may connect to your

telephone line and still have all of those devices ring when your telephone number is

called. In most, but not all areas, the sum of the

REN’s

of all devices connected to

one line should not exceed five (5.0). To be certain of the number of devices you

may connect to your line, as determined by the REN, you should contact your local

telephone company to determine the maximum REN for your calling area.

2. Connection to Telephone Line

This unit must not be connected to a coin operated line. If you are on a party line,

check with your local telephone company.

3. Incidence of Harm to the Telephone Lines

Should terminal equipment cause harm to the telephone network, the telephone

company shall, where practical, notify the customer that temporary discontinuance of

service may be required.

However, where prior notice is not practical, the telephone company may temporarily

discontinue service forthwith, if such action is reasonable in the circumstances. In

case of such unnotified temporary discontinuance of service, the telephone company

shall:

(a)

Promptly notify the customer of such temporary discontinuance of service.

(b) Afford the customer the opportunity to correct the situation which gave rise to

the temporary discontinuance.

(c)

Inform the customer of the right to bring a complaint to the Federal

Communication Commission pursuant to the procedures set out in Subpart E of

Part 68 of FCC Telephone Equipment Rules.

4. Compatibility of the Telephone Network and Terminal Equipment

(a) Availability of telephone interface information.

Technical information concerning interface parameters and specifications not

specified in FCC Rules, including the number of Ringers which may be connected to

a particular telephone line, which is needed to permit Terminal Equipment to operate

in a manner compatible with Telephone Company communications facilities, shall be

provided by the Telephone Company upon customer’s request.

Telephone Company and F.C.C.

Requirements and Responsibilities

(b) Changes in Telephone Company Communications Facilities, Equipment, Operations

and Procedures.

The Telephone Company may make changes in its communications facilities,

equipment, operations or procedures, where such action is reasonably required in the

operation of its business and is not inconsistent with the rules and regulations in FCC

Part 68.

If such changes can be reasonably expected to render any customer Terminal

Equipment incompatible with Telephone Company Communications Facilities, or

require modification or alteration of such Terminal Equipment, or otherwise

materially affect its use or performance, the customer shall be given adequate notice

in writing, to allow the customer an opportunity to maintain uninterrupted service.

Notify the Telephone Company

Installation must be performed by a qualified professional installer.

Before connecting this equipment to any telephone, call the telephone company and

inform them of the following:

Telephone numbers to which the system will be connected

Make

...............................................................

Panasonic

Model

..............................................................

KX-TD308

FCC Registration No.

....................................

found on the bottom of the unit

Ringer Equivalence No.

................................. 0.4B

Facility Interface Code

...................................

02LS2

Service Order Code

........................................

9.OF

Required Network Interface Jack..

.................

14 C

Note :

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

Telephone Company and F.C.C.

Requirements and Responsibilities

Caution:

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this device.

When programming emergency numbers and/or making test calls to emergency

numbers:

Remain on the line and briefly explain to the dispatcher the reason for the call

before hanging up.

2. Perform such activities in the off-peak hours, such as early morning hours or late

evenings.

Introduction

This Installation Manual provides technical information for the Panasonic Digital Super

Hybrid System, KX-TD308. It is designed to serve as an overall technical reference for

the system and includes a description of the system, its hardware and software, features

and services and environmental requirements.

This manual contains the following sections:

Section 1, System Outline.

Provides general information on the system including system capacity and

specifications.

Section 2, Installation.

Contains the basic system installation and wiring instructions, as well as how to install

the optional cards and units.

Section 3, Features.

Describes all the basic, optional and programmable features in alphabetical order. It

also provides information about the programming required, conditions, connection

references, related features and operation for every feature.

Section 4, System Programming.

Provides step-by-step programming instructions for a proprietary telephone.

Section 5, List.

Lists tone/ring tone and default values of system programming.

Section 6, ‘Ikoubleshooting.

Provides information for system and telephone troubleshooting.

NOTE

The following documents may be used in conjunction with this manual:

User Manual for KX-TD308 System, DIGITAL Proprietary Telephones and Standard

Telephones.

Programming Tables

The programming tables are designed to be used as a hard copy reference for entering

user-programmed data.

Otros manuales para KX-TD308

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema telefónico de Panasonic

Panasonic

Panasonic KX-T77 Series Manual de usuario

Panasonic

Panasonic DBS 824 Manual de usuario

Panasonic

Panasonic KX-TG6700BXB Manual de usuario

Panasonic

Panasonic KX-TG6051BXM Manual de usuario

Panasonic

Panasonic VB-44210G Manual de usuario

Panasonic

Panasonic KX-TG4771B Manual de usuario

Panasonic

Panasonic KX-T3186 Manual de usuario

Panasonic

Panasonic KX-TVS90 Manual de usuario

Panasonic

Panasonic EASA-PHONE KX-T2310 Manual de usuario

Panasonic

Panasonic KX-TSC12W Manual de usuario

Panasonic

Panasonic KX-TDA50 Manual de usuario

Panasonic

Panasonic KX-TVM50 Manual de usuario

Panasonic

Panasonic KX-TS108W Manual de usuario

Panasonic

Panasonic KX-TVS80 Manual de usuario

Panasonic

Panasonic TDA-600 Manual de usuario

Panasonic

Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008... Manual de usuario

Panasonic

Panasonic KX-TS2365RUB Manual de usuario

Panasonic

Panasonic KX-TE82461X Manual de usuario

Panasonic

Panasonic KX-TVS50 - 2 Port Voicemail System Manual de usuario

Panasonic

Panasonic KX-TSC14B Manual de usuario

Panasonic

Panasonic KX-TG6440PK Manual de usuario

Panasonic

Panasonic Easa-Phone VA-208 Manual de usuario

Panasonic

Panasonic KX-TD1232E Manual de usuario

Panasonic

Panasonic KX-TSC11 Manual de usuario

Manuales populares de Sistema telefónico de otras marcas

Teleco

Teleco Perfect Voice Tis 16 Manual de usuario

AT&T

AT&T Network Adapter 25 Manual de usuario

AVE

AVE AF902R-CE Manual de usuario

Tynetec

Tynetec Advent xt Manual de usuario

Ericsson

Ericsson DCT1800-S Manual de usuario

NEC

NEC Electra Elite 192 Manual de usuario

Alcatel

Alcatel EASY REFLEXES 4200 Manual de usuario

Bticino

Bticino PABX 28D Manual de usuario

NEC

NEC SL 2100 Manual de usuario

Sonifex

Sonifex Phone In 6 Manual de instrucciones

TransTel Communications

TransTel Communications TD-824i Instrucciones de montaje

Nortel

Nortel BCM50 Manual del producto

ASCOM

ASCOM TD 92375GB Manual del propietario

Karel

Karel MS26S Hoja de información del producto

EnGenius

EnGenius DuraFon PRO Manual de usuario

Teledat

Teledat X130 DSL Manual de usuario

SpectraLink

SpectraLink MOG400 Manual de usuario

LG-Nortel

LG-Nortel 300 Series Instrucciones de funcionamiento y seguridad