Panasonic AK-HRP1000G Manual de usuario

DVQP1627ZA

W0817MN0 -PS

ENGLISH

For details of operating Remote Operation Panel AK-HRP1000G, please

visit the Panasonic website (http://pro-av.panasonic.net/en/manual/index.

html), and refer to the Operating Instructions (HTML or PDF).

Read this document when using the AK-HRP1000G Remote Operation Panel in

conjunction with AW-HR140 or AW-HE130 Series HD Integrated Cameras.

Operating Guide

Remote Operation Panel

Model No. AK-HRP1000G

Connecting the Unit to AW-HR140/AW-HE130

Series Cameras 3

Connection examples 3

Connections 5

Compatible Functions List 6

ROP Menu (when AW-HR140/AW-HE130 is

connected) 10

ROP menu list 10

01 SHUTTER SPEED 15

02 PEDESTAL 16

03 CHROMA 17

04 GAIN 18

05 WHITE BALANCE 19

06 GAMMA 20

07 KNEE 21

08 WHITE CLIP 22

09 DETAIL 23

10 MATRIX 24

11 COLOR CORRECTION 25

12 DNR 28

13 DIGTAL HAZE CLEAR 29

14 HOUSING 30

15 BRIGHTNESS 31

16 LENS CONTROL 32

17 SYSTEM CAM 33

18 CAMERA MENU CONTROL 34

19 ROP SETTING 35

20 CONNECT SETTING 36

21 ROP IP SETTING 37

22 CAMERA IP SETTING 37

- 2 -

Table of Contents

Connecting the Unit to AW-HR140/AW-HE130 Series

Cameras

Connection examples

Serial connection with AW-HR140

External DC

power supply

<RS-422> connector

HD Integrated Camera

AW-HR140

* Prepare a cable that is in accordance

with the following serial connection

cable specifications.

PoE compatible

switching hub or injector

IP connection with AW-HR140

LAN cable (straight cable)

External DC

power supply

<LINK/ACT> connector

HD Integrated Camera

AW-HR140

LAN cable (straight cable)

Switching hub with

PoE support

- 3 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Serial connection with AW-HE130

External DC

power supply

<RS-422> connector

HD Integrated Camera

AW-HE130

* Prepare a cable that is in accordance

with the following serial connection

cable specifications.

PoE compatible

switching hub or injector

IP connection with AW-HE130

HD Integrated Camera

AW-HE130

<LINK/ACT> connector

Switching hub with

PoE support

LAN cable (straight cable)

External DC

power supply

Serial connection cable specifications

ヒヤモヮチチュモヵユドラナ⾺⾺⾼⾼ビヤヰヮチチュモヵユドロナピヤヰヮチチヤヰワヵドラナフヤヰヮチチヤヰワヵドロナヤモヮēチンヰヱヤモヮēチンヰヱンヰヱチēチヤモヮンヰヱチēチヤモヮブヤヰヮチチワㄐハチモプヤヰヮチチワㄐハチャヘヤヰヮチチワㄐハチヤベヤヰヮチチワㄐハチュペ

ヒビチヷ

ヒパヨワュヒヨンュヵモロロヺンヹュノヵヹュノヵヹュヌンヹュヌチ⾼チ⾼ビピフブプヘベラㄊㄓㄐㄔㄆホチランヒパモノヒパヱノヒパブドヘピナAW-HR140/AW-HE130

<RS-422> connector side (RJ45)

AK-HRP1000G

[CCU] connector side

Pin No. Function Polarity Flow of signal

- 4 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Connections

Set the connection setting to [Serial(AW2)] or [LAN(AW2)] in the [CONNECT SETTING] menu.

ヤヰワワユヤヵチヴユヵヵリワヨ

ヒチバチヒヒ

ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ

ワヰワワヰワ

ヤモヮベヤモヮペ

ヴㄆㄓㄊ㄂ㄍドモヸビナロモワドモヸビナワヰワワヰワワヰワワヰワ

ヤモヮフ

ワヰワ

ヤモヮヘヤモヮビヤモヮピヤモヮヒヤモヮブヤモヮプ

NOTE

To connect with the AW-HR140/AW-HE130, upgrade the system version of the unit to 4.30-00-0.00 or later.

When connecting, observe the following points.

Serial connection

Use a dedicated cable to connect the [CCU] connector of this unit to the <RS-422> connector of the AW-HR140/AW-

HE130.

Use a PoE power supply for the power supply.

LAN connection

Connect the [LAN] connector on this unit to the <LINK/ACT> connector on the AW-HR140/AW-HE130 using a LAN

cable (sold separately).

Configure the camera IP address and port number settings of the connection destinations in [CAMERA IP SETTING] as

well.

This unit can be powered using PoE. Use a switching hub with PoE support.

Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).

For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.

- 5 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Compatible Functions List

When the unit is used in conjunction with an AW-HR140 Series or AW-HE130 Series HD Integrated Camera, there will be functions that are

limited or disabled for some of the unit’s buttons, dials, and other controls. Be sure to refer to the following table.

Front panel 1

Front panel 2

Front panel 3

Front panel 4

Front panel 5

Front panel 6

Front panel 7

Front panel 8

Front panel 9

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 1

[POWER HEAD] button ✓

[POWER VF] button ×

[BARS/TEST] button ✓Only the ON/OFF for the color bar signal

output will function.

[REF. RECALL] button ×

[AUTO WHITE] button ✓

[AUTO BLACK] button ✓

[AUTO SET UP] button ×

[CHARA] button ×

[MATRIX] button ×

[SKIN DTL] button ×

[DRS] button ✓

[B.GAMMA] button ×

[ASSIGN] button ✓

- 6 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 2

[ASSIGN STATUS] button ✓

Buttons [1] to [5] (CONTROL/MODE) ✓

[CONTROL/MODE] button ✓

Front panel 3

LCD panel ✓

[MENU] dial ✓

[EXIT] button ✓

[UNDO] button ✓

[MENU] button ✓

Front panel 4

[ON] indicator (SCENE FILE) ✓This is always lit.

Scene file page switching button ×

[1/6], [2/7], [3/8], [4/EXT1], and [5/EXT2]

buttons (SCENE FILE)

✓Only scenes 1 to 4 are enabled.

[STORE] button ×

Front panel 5

[ND] indicator ✓

[ND] setting button ✓

[ND] display ✓

[CC] indicator ×

[CC] setting button ×

[CC] display ×

[HEAD] button ×

[ECC] button ×

[M.GAIN] indicator ✓

[M.GAIN] setting button ✓

[M.GAIN] display ✓

[VAR] button ×

Front panel 6

[SHUTTER] display ✓“----” is displayed on the [SHUTTER] display

when the synchro shutter is selected. Also,

the [SHUTTER] setting buttons cannot be

used.

When the shutter speed value is “10000”,

“9999” is displayed.

[ON] button (SHUTTER) ✓

[SYNC] button (SHUTTER) ✓

[SHUTTER] setting buttons ✓“----” is displayed on the [SHUTTER] display

when the synchro shutter is selected. Also,

the [SHUTTER] setting buttons cannot be

used.

- 7 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 7

[GAIN R] and [GAIN B] dials ✓

[GAIN G] dial ×

[BLACK R] and [BLACK B] dials ✓Only the pedestal can be adjusted.

[BLACK G] dial ×

[FLARE] button ✓Stabilized using the pedestal adjustment.

Flare adjustment cannot be performed.

[PAINT LOCK] button ✓

[DTL] dial ✓UHD detail adjustment cannot be performed.

[CAM SEL] indicator ✓

[SELECT] dial ✓[SYNC] and [M.FLR] adjustment cannot be

performed.

[TEMP] indicator ✓

[SYNC] indicator ×

[MFLR] indicator ×

[USER] indicator ✓

Front panel 8

[EXT] indicator ×

[D.EXT] indicator ✓

[IRIS] lever ✓

[M.PED] dial ✓

[RELATIVE] button ✓

[SENSE] dial ✓

[COARSE] dial ✓

[IRIS] display ×

[AUTO] button ✓When the auto iris function is enabled, the

iris gauge that appears at the bottom of the

LCD panel (status screen) will not operate.

[CLOSE] button ✓

[M.PED] display ✓When the setting value is -100 to -150 and

100 to 150, display is as follows because

there is a limit to the number of display digits.

150: F0

140 to 149: E0 to E9

130 to 139: d0 to d9

120 to 129: C0 to C9

110 to 119: b0 to b9

100 to 109: A0 to A9

-100 to -109: -A0 to -A9

-110 to -119: -b0 to -b9

-120 to -129: -C0 to -C9

-130 to -139: -d0 to -d9

-140 to -149: -E0 to -E9

-150: -F0

[IRIS LOCK] button ✓

[M.PED LOCK] button ✓

- 8 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 9

Camera number/tally display ✓

[ALM] indicator ✓

[OPT] indicator ×

[PANEL ACTIVE] button ✓

[CALL] button ×

[PREVIEW] button ✓

Memory card slot ✓

Memory card access indicator ✓

Torque adjustment screw ✓

- 9 -

Connecting the Unit to AW-HR140/AW-HE130 Series Cameras

ROP Menu (when AW-HR140/AW-HE130 is connected)

ROP menu list

When an AW-HR140/AW-HE130 HD Integrated Camera is connected, the ROP menu will be as follows. The setting values will vary

depending on the connected model. Depending on the model, unsupported functions will be displayed as [-].

For details on menu operations, refer to the following sections in the Operating Instructions.

“Displaying menus”

“Basic menu operations”

01 SHUTTER SPEED

MODE “MODE” (see page 15)

SPEED “SPEED” (see page 15)

02 PEDESTAL

M.PED “M.PED” (see page 16)

PED R “PED R” (see page 16)

PED B “PED B” (see page 16)

03 CHROMA LEVEL (%) “LEVEL (%)” (see page 17)

04 GAIN

SUPER GAIN “SUPER GAIN” (see page 18)

GAIN “GAIN” (see page 18)

AGC MAX GAIN “AGC MAX GAIN” (see page 18)

05 WHITE BALANCE

MODE “MODE” (see page 19)

COLOR TEMP “COLOR TEMP” (see page 19)

GAIN R “GAIN R” (see page 19)

GAIN B “GAIN B” (see page 19)

ATW SPEED “ATW SPEED” (see page 19)

ATW WIDTH “ATW WIDTH” (see page 19)

06 GAMMA

TYPE “TYPE” (see page 20)

GAMMA “GAMMA” (see page 20)

DRS “DRS” (see page 20)

07 KNEE

KNEE MODE “KNEE MODE” (see page 21)

KNEE POINT “KNEE POINT” (see page 21)

KNEE SLOPE “KNEE SLOPE” (see page 21)

08 WHITE CLIP

WHITE CLIP “WHITE CLIP” (see page 22)

WHITE CLP LV(%) “WHITE CLP LV(%)” (see page 22)

09 DETAIL

M.DTL “M.DTL” (see page 23)

V DTL LEVEL “V DTL LEVEL” (see page 23)

DTL BAND “DTL BAND” (see page 23)

NOISE SUPPRESS “NOISE SUPPRESS” (see page 23)

FLSHTN NIS SUP. “FLSHTN NIS SUP.” (see page 23)

SW “SW” (see page 23)

10 MATRIX

TYPE “TYPE” (see page 24)

R-G “R-G” (see page 24)

R-B “R-B” (see page 24)

G-R “G-R” (see page 24)

G-B “G-B” (see page 24)

B-R “B-R” (see page 24)

B-G “B-G” (see page 24)

- 10 -

ROP Menu (when AW-HR140/AW-HE130 is connected)

Otros manuales para AK-HRP1000G

Tabla de contenidos

Otros manuales de Mando a distancia de Panasonic

Panasonic

Panasonic CZ-RTC6BLW Manual de usuario

Panasonic

Panasonic EUR7722X90 Manual de usuario

Panasonic

Panasonic EUR501450 Manual de usuario

Panasonic

Panasonic EUR511155 Manual de usuario

Panasonic

Panasonic CZ-RTC3 Manual de usuario

Panasonic

Panasonic EUR511156 Manual de usuario

Panasonic

Panasonic 060-2331 Manual de usuario

Panasonic

Panasonic EUR511160 Manual de usuario

Panasonic

Panasonic EUR511151 Manual de usuario

Panasonic

Panasonic CZ - RD52CP-1 Manual de usuario

Panasonic

Panasonic CZ-RD516C Manual de usuario

Panasonic

Panasonic WV-CU50E Manual de usuario

Panasonic

Panasonic EUR511501 Manual de usuario

Panasonic

Panasonic CZ-RTC4 Manual de usuario

Panasonic

Panasonic AK-HRP1015G Manual de usuario

Panasonic

Panasonic AWCB400N - REMOTE OPERATION PANEL Manual de usuario

Panasonic

Panasonic AK-HRP1005G Manual de usuario

Panasonic

Panasonic EUR511112 Manual de usuario

Panasonic

Panasonic TY-RM09SL Manual de usuario

Panasonic

Panasonic WV-CU161 Manual de usuario

Panasonic

Panasonic CZ-RTC6BLW Manual de usuario

Panasonic

Panasonic WV-CU20E Manual de usuario

Panasonic

Panasonic EUR511111 Manual de usuario

Panasonic

Panasonic WVCU550CJ - SYSTEM CONTROLLER Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación

Invacare

Invacare G91S Manual de usuario