Panasonic KX-HNK102C Manual de usuario

Operating Instructions

Home Network System

Keychain Remote

Model No. KX-HNK102C

Thank you for purchasing a Panasonic product.

This document explains how to operate the keychain remote properly.

For details about how to use the system, refer to the User’s Guide

(page 11).

Please read this document before using the unit and save it for future

reference.

For assistance, please visit our Support page:

www.panasonic.ca/english/support

In order to use this device:

RDownload the latest version of the [Home Network] app.

RUpdate your hub to the latest firmware version (version 5.50 or later).

For more information, refer to the User’s Guide (page 11).

Printed in China

HNK102C_(en_en)_0722_ver.011.pdf 1 2015/07/22 11:04:18

Important Information
Accessory information ...............3
About this system ......................4
For your safety ...........................4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions ..........7
LED indicator .............................7
Setup overview ..........................8
Inserting the battery ...................9
Attaching the key ring ................9
Registering the remote ............10
Wireless communication
range .......................................10
Appendix
Using the remote .....................11
Features available when using the
[Home Network] app ................11
Accessing the User’s Guide ....11
Specifications ..........................12
Industry Canada Notices and
other information ......................13
Warranty ..................................14
2
Table of Contents
HNK102C_(en_en)_0722_ver.011.pdf 2 2015/07/22 11:04:18

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

ABattery*11

BKey ring 1

*1 When replacing the battery, refer to the battery specifications noted under

“Power source” on page 12.

Other information

RDesign and specifications are subject to change without notice.

RThe illustrations in these instructions may vary slightly from the actual product.

Trademarks

RiPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other

countries.

RAndroid is a trademark of Google Inc.

RMicrosoft, Windows, and Internet Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

RAll other trademarks identified herein are the property of their respective owners.

For assistance, visit www.panasonic.ca/english/support 3

Important Information

HNK102C_(en_en)_0722_ver.011.pdf 3 2015/07/22 11:04:18

About this system

RThis system is an auxiliary system; it

is not designed to provide complete

protection from property loss.

Panasonic will not be held

responsible in the event that

property loss occurs while this

system is in operation.

RThe system’s wireless features are

subject to interference, therefore

functionality in all situations cannot

be guaranteed. Panasonic will not

be held responsible for injury or

damage to property that occurs in

the event of wireless communication

error or failure.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

RUse only the power source marked

on the product.

RDo not connect non-specified

devices.

Installation

RTo prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

RDo not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

Operating safeguards

RDo not disassemble the product.

Medical

RConsult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

RDo not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CR Lithium battery

RDo not recharge, disassemble,

remodel, heat or throw it into fire.

RDo not touch the terminals and

with metal objects.

RRisk of explosion if battery is

replaced by an incorrect type.

Dispose of used battery according to

local regulations.

RIf any electrolyte should come into

contact with your hands or clothes,

wash it off thoroughly with water.

RIf any electrolyte should come into

contact with your eyes, never rub

your eyes. Rinse your eyes

4For assistance, visit www.panasonic.ca/english/support

Important Information

HNK102C_(en_en)_0722_ver.011.pdf 4 2015/07/22 11:04:18

thoroughly with water, and then

consult a doctor.

CAUTION

CR Lithium battery

RUse only the battery noted on

page 3.

RInsert the battery correctly.

RDo not leave the battery in an

automobile exposed to direct

sunlight for a long period of time with

the doors and windows closed.

RRemove the battery if you do not

use the product for a long period of

time. Keep it in a cool, dark area.

RDo not replace a battery with wet

hands.

RKeep out of the reach of small

children. There is a risk of

swallowing. If the battery is

swallowed, seek medical attention

immediately.

RRemove the battery if it becomes

unusable. There is a risk of leakage,

overheating, and rupture. Do not

attempt to use a battery if it is

leaking.

RExercise care when handling the

batteries. Do not allow conductive

materials such as rings, bracelets, or

keys to touch the batteries,

otherwise a short circuit may cause

the batteries and/or the conductive

material to overheat and cause

burns.

Do not intentionally pour water on

the battery or allow it to get wet.

There is a risk of fire and smoke. If

the battery becomes wet, remove it

immediately and contact an

authorized service centre.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

2. Use only the batteries indicated in

this document. Do not dispose of

batteries in a fire. They may

explode. Check with local codes for

possible special disposal

instructions.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

RFor maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

For assistance, visit www.panasonic.ca/english/support 5

Important Information

HNK102C_(en_en)_0722_ver.011.pdf 5 2015/07/22 11:04:18

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

RIf the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

RKeep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

RThe product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

RThe product should not be exposed

to direct sunlight.

RDo not place heavy objects on top of

the product.

RThe product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

temperature is less than 0 °C (32 °F)

or greater than 40 °C (104 °F).

ROperating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Other information

CAUTION: Risk of explosion if battery

is replaced by an incorrect type.

Dispose of used batteries according to

the instructions.

Routine care

RWipe the outer surface of the

product with a soft moist cloth.

RDo not use benzine, thinner, or any

abrasive powder.

Information on Disposal in other

Countries outside the European

Union

These symbols are only valid in the

European Union. If you wish to discard

these items, please contact your local

authorities or dealer and ask for the

correct method of disposal.

Note for the battery removal

procedure

Refer to “Inserting the battery” on

page 9.

6For assistance, visit www.panasonic.ca/english/support

Important Information

HNK102C_(en_en)_0722_ver.011.pdf 6 2015/07/22 11:04:18

Part names and

functions

n Front view

n Rear view

LED indicator

(Arm: Away) button

Arms the alarm system using the

[Arm: Away] mode.

(disarm) button

Disarms the alarm system.

(smart) button

Used to turn on a smart plug,

trigger the alarm system, etc.

Battery cover lock

Battery cover

M N

Used to register the keychain

remote to the hub.

Key ring eyelet

Key ring

LED indicator

You can use the LED indicator to

confirm the remote’s status.

Indicator Status

Off Normal operation or

no power*1

Amber,

blinking

quickly

Signal is being sent

to the hub (you are

pressing a button)*2

Red, lit [Arm: Away] mode

selected (you

pressed the arm

button)*2

Green, lit [Disarm] mode

selected (you

pressed the disarm

button), or you

pressed the smart

button*2

For assistance, visit www.panasonic.ca/english/support 7

Setup

HNK102C_(en_en)_0722_ver.011.pdf 7 2015/07/22 11:04:19

Indicator Status

Red, blinking Remote is out of

range of the hub, or

could not

communicate with

the hub

Green,

blinking slowly

Registration mode

(you pressed and

held MN)

Repeating

pattern of

blinking green

and blinking

red

Low battery

*1 The LED lights for about 2

seconds after a button is pressed,

then turns off. If the LED indicator

does not light when you press a

button, the battery must be

replaced.

*2 The LED indicator does not

indicate remote’s status if the

remote has not been registered

(page 10).

Setup overview

1Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2Insert the battery

The remote is battery powered.

3Registration

Required only if the remote was

purchased separately (i.e., not as

part of a bundle).

4Confirm the usage area

Read the information in this

document to confirm that the

desired usage area is suitable to

proper operation.

8For assistance, visit www.panasonic.ca/english/support

Setup

HNK102C_(en_en)_0722_ver.011.pdf 8 2015/07/22 11:04:19

Inserting the battery

RUSE ONLY a CR2 Lithium battery.

RConfirm the polarities ( , ).

RUsing a metal object to open the

lock may scratch the lock.

1Remove the battery cover.

RInsert a thin, flat object into the

battery cover lock and rotate it

to the “unlocked” position, as

shown below.

Locked Unlocked

RGrasp the indented areas on

the sides of the battery cover

(A) and lift the cover up (B).

2Insert the battery.

3Attach and lock the battery cover.

RAfter attaching the battery

cover, rotate the lock to the

“locked” position.

Attaching the key

ring

Attach the key ring to the remote as

shown.

For assistance, visit www.panasonic.ca/english/support 9

Setup

HNK102C_(en_en)_0722_ver.011.pdf 9 2015/07/22 11:04:19

Registering the

remote

This procedure is not required for

devices that were included as part of

a bundle.

Before you can use the remote, it must

be registered to the hub.

If you purchased devices separately

(i.e., not as part of a bundle), you must

You can register each device by using

the registration buttons or the [Home

Network] app.

Using registration buttons

1Hub:

Press and hold M OTHER

DEVICEN until the LED indicator

blinks slowly in green.

2Remote:

Open the battery cover (page 9),

then use an object with a thin tip,

press and hold MN until the

LED indicator blinks slowly in

green (page 7).

RWhen registration is complete,

the hub sounds one long beep.

Note:

RTo cancel without registering the

remote, press MN on the hub and

on the remote again.

RIf registration fails, the hub sounds

several short beeps.

Using the app

When you register the remote by using

the [Home Network] app, you can

assign a name to your devices. For

more information, refer to the User’s

Guide (page 11).

Wireless

communication

range

The wireless communication range of

each device in the system from the hub

is approximately 50 m (160 feet)

indoors and approximately 300 m

(1,000 feet) outdoors. Wireless

communication may be unreliable

when the following obstacles are

located between the hub and other

devices.

RMetal doors or screens

RWalls containing aluminum-sheet

insulation

RWalls made of concrete or

corrugated iron

RDouble-pane glass windows

RMultiple walls

RWhen using each device on

separate floors or in different

buildings

10 For assistance, visit www.panasonic.ca/english/support

Setup

HNK102C_(en_en)_0722_ver.011.pdf 10 2015/07/22 11:04:19

Tabla de contenidos

Idiomas:

Otros manuales de Mando a distancia de Panasonic

Panasonic

Panasonic TY-RM50VW Manual de usuario

Panasonic

Panasonic AW-RP50E Manual de usuario

Panasonic

Panasonic EUR7702KE0 Manual de usuario

Panasonic

Panasonic OneRemote RMB4 Manual de usuario

Panasonic

Panasonic CZ-RTC5B Manual de usuario

Panasonic

Panasonic CZ-RTC6 Manual de usuario

Panasonic

Panasonic Palmcorder PV-DRC9 Manual de usuario

Panasonic

Panasonic CZ-RWSU3 Manual de usuario

Panasonic

Panasonic CZ-RWSU2 Manual de usuario

Panasonic

Panasonic EUR7603Z40 Manual de usuario

Panasonic

Panasonic AK-HRP200G Manual de usuario

Panasonic

Panasonic SH-MK390 Manual de usuario

Panasonic

Panasonic AW-CB400L Manual de usuario

Panasonic

Panasonic EUR7502XB0 - REMOTE GUIDE-SAHE200K Manual de usuario

Panasonic

Panasonic KX-HNK102 Manual de usuario

Panasonic

Panasonic CZ-RTC5A Manual de usuario

Panasonic

Panasonic AJRC10G - REMOTE CONTROL UNIT Manual de usuario

Panasonic

Panasonic EUR646464 Instrucciones de funcionamiento

Panasonic

Panasonic EUR511151 Manual de usuario

Panasonic

Panasonic AW-RP150G Manual de usuario

Panasonic

Panasonic CZ-RWSU2 Manual de usuario

Panasonic

Panasonic CZ-RTC6BL Manual de usuario

Panasonic

Panasonic WV-CU161 Manual de usuario

Panasonic

Panasonic TX-28DT4 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación

Invacare

Invacare G91S Manual de usuario