PAB FIRE 05 Manual de usuario
PAB FIRE 05
THERMOPLASTIC
· user manual ·
Helmet for structural firefighting
CERTIFICATES: EN 443 | EN 14458
www.pab.hr
3
SAFETY NOTICE
5
NOMENCLATURE OF PARTS
6
TECHNICAL DATA
8
CERTIFICATIONS AND MARKINGS
8
INSTRUCTIONS FOR USE AND CARE
12
CLEANING AND DISINFECTION
14
SERVICING AND MAINTENANCE
14
STORAGE AND TRANSPORT
15
SERVICE LIFE AND DISCARD
15
WARRANTY
16
PAB FIRE 05
www.pab.hr
Thank you for choosing a PAB Akrapović product.
PAB Fire 05 helmet is a safety helmet for the head
intended for firefighting in buildings and other
structures, as for other typical tasks and
interventions of fire brigades.
The PAB Fire 05 is in conformity with Regulation
(EU) 2016/425, with reference to harmonised
standard EN 443:2008.
Made of impact and high-temperature resistant
thermoplastic, this helmet offers an optimal
protection and maximum wear comfort. The
helmet is very light and can be equipped with a
wide range of accessories.
5
OVERVIEW
SAFETY NOTICE
Warning:
Read these instructions carefully before using the helmet.
For adequate protection, this helmet must fit or be adjusted to the size of the user’s head.
Inappropriate use, maintenance or servicing can affect the function of the helmet and can
seriously endanger the user’s life. The helmet’s operability must be checked and verified before
each use. The helmet is not to be used if the operability test is unsuccessful, if the helmet is
damaged, if proper servicing or maintenance has not been made, or if PAB Akrapović original
spare parts have not been used.
The length of the useable life of this helmet will be affected by the types of materials used in its
construction and the environments in which the helmet is used and stored. Recommendations
on this topic should be sought from the manufacturer.
The intended protection provided by the helmet can only be ensured when it is properly
assembled and correctly fitted. Any removable part must not be worn separately.
When fitted with another item of personal protective equipment or with an accessory (other than
as supplied by the helmet manufacturer for use with this helmet) a helmet marked as complying
with EN 443 might no longer satisfy all clauses of the standard. Refer to information provided by
the helmet manufacturer.
The helmet provides protection of the head and face against shock, sharp objects, splatters of
corrosive chemicals (Sulphuric acid, Sodium hydroxide, p-Xylene, Butan-1-ol, n-Heptane), molten
metals, radiating heat, flames, electric current. The user’s protection is not guaranteed in
situations where the conditions exceed those described in the specifications above.
This helmet complies with the retention requirements of standard EN 443:2008, only when the
chin strap supplied by PAB Akrapović is worn and adjusted in accordance with these
instructions.
The helmet absorbs the energy of a blow by partial destruction of, or damage to, the helmet.
Even though such damage may not be readily apparent, any helmet subjected to severe impact
should be replaced.
Replace any damaged parts only with original PAB Akrapović parts, as only these original parts
are authorised and ensure the performance of the helmet.
PAB FIRE 05
www.pab.hr
The user’s attention is also drawn to the danger of modifying or removing any of the original
component parts of the helmet, other than as recommended by PAB Akrapović. Helmets should
not be adapted for fitting attachments in a way not recommended by PAB Akrapović.
NOMENCLATURE OF PARTS
①Shell
② Visor (face guard) PAB Fire 05
Clear, Gold or Silver
③ Goggles (eye guard) model
Goggles 05
④ Lamp holder
⑤ SCBA mask attachment
⑥ Headband with ratchet
knob for size adjustment
⑦ Chin strap with quick
release buckle
⑥ Headband with ratchet knob
for size adjustment
⑧ Chin strap with quick release
buckle
⑨Headband with leather/fabric
padding
7
⑥Headband with ratchet knob
for size adjustment
⑨ Neck protector (ALU)
⑩ Holland type neck protector
PAB FIRE 05
www.pab.hr
TECHNICAL DATA
Helmet sizes For head sizes from 52 to 64 cm (20.5 to 25.2 inches)
Weight
(helmet with face shield and without
optional accessories)
1445 g ± 30 g
The weight may vary depending on the shell colour and helmet
configuration.
HELMET MARKING
CE conformity marking
0497 Notified body number
EN 443:2008 European standard for “Helmets for firefighting in buildings and other
structures “
B3b Indicates the protection zone assured by the helmet
(protects the dome of the skull and the frontal chin region)
*** Indicates protection at low temperatures down to -30°C
E2/E3 Indicates the electrical insulation of the wet helmet
C Indicates resistance to liquid chemicals (Sulphuric acid,
Sodium hydroxide, p-Xylene, Butan-1-ol, n-Heptane)
♺Recyclable
52–64 Size range (head circumference in cm)
See manufacturer’s information
PA 6.6 Shell material –Polyamide 6.6
PAB FIRE 05 Model identification
2021Year of manufacture
1 2 3 4 5 6 7 8 9 10 11 12 Month of manufacture
Manufacturer’s trademark
Marking of conformity with DIRECTIVE 2014/90/EU OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 23 July 2014 on marine equipment
9
ACCESSORIES MARKINGS
Visor PAB FIRE 05 CLEAR
CE conformity marking
0497
Notified body number
EN 14458:2018
European standard for Personal eye-equipment –High performance visors
intended only for use with protective helmets
Manufacturer’s trademark
PAB Akrapović d.o.o.
Name of the manufacturer
Most 26, 52420 Buzet,
Croatia
Address of the manufacturer
PAB FIRE 05 CLEAR
Model identification
2021
Year of manufacture
1 2 3 4 5 6 7 8 9 10 11 12
Month of manufacture
+
Increased thermal performance use
😐
Visor type - face guard
R1
Radiant heat protection level for increased thermal performance
BT
Resistance to high speed particles (medium energy impact) at extremes of
temperature
E1/E3
Electrical properties (conductive headform and surface resistance)
(−30 °C/ + 50 °C)
Extremes of temperature to which the visor has been tested
See manufacturer’s information
PC
Material - Polycarbonate
Recyclable
10
Visor PAB FIRE 05 GOLD
CE conformity marking
0497
Notified body number
EN 14458:2018
European standard for Personal eye-equipment –High performance visors
intended only for use with protective helmets
Manufacturer’s trademark
PAB Akrapović d.o.o.
Name of the manufacturer
Most 26, 52420 Buzet,
Croatia
Address of the manufacturer
PAB FIRE 05 CLEAR
Model identification
2021
Year of manufacture
1 2 3 4 5 6 7 8 9 10 11 12
Month of manufacture
+
Increased thermal performance use
😐
Visor type - face guard
R2
Radiant heat protection level for increased thermal performance
AT Resistance to high speed particles (high energy impact) at extremes of
temperature
E1/E3
Electrical properties (conductive headform and surface resistance)
(−30 °C/ + 50 °C)
Extremes of temperature to which the visor has been tested
See manufacturer’s information
PC
Material - Polycarbonate
Recyclable
Otros manuales para FIRE 05
1
Tabla de contenidos
Otros manuales de Accesorios para motocicletas de PAB
Manuales populares de Accesorios para motocicletas de otras marcas
SRC
SRC B-TRK502-01-01-SL Manual de usuario
3M
3M Speedglas 9100 MP Manual de usuario
hepco & becker
hepco & becker 6307520 00 01 Manual de usuario
HOMCOM
HOMCOM AA0-077 Manual de usuario
hepco & becker
hepco & becker 6307558 00 01 Manual de usuario
Wunderkind Custom
Wunderkind Custom 106503-F15 Guía del usuario
