One Stop Systems OSS-PCIe-4U-EXP-2022-400
Page 5
2.c. Host Adapter Specifications
Dimensions: (H x L): 2.2 x 4.5 inches (55 x 114mm)
Front Panel Connectors: One PCIe x8 cable connector
Front Panel Indicators: Power On / Cable Present LEDs
Power Consumption (designed to meet the following conditions) 3.75W typical, 3.3@ 1.3A
Operating Environment (designed to meet the following conditions)
Temperature Range: 0° to 50°C (32° to 122°F)
Relative Humidity: 10 to 90% non-condensing
Shock: 30g acceleration peak (11ms pulse)
Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration.
2.d. Expansion Link Board Specifications
Dimensions (H x L) 3.973 x 6.299 in (100 x 161 mm), 1 slot wide
Switch: PLX PEX8532 32 lane switch
External Interface Two x4 PCIe Cable Rev, 0.4 ports
Downstream Interface: 16 lanes of PCI Express on the backplane connectors are auto configurable on the card edge
connectors as: Two x8 PCIe links, Four x4 PCIe links
Front Panel Connectors: Molex 75586-0010
Front Panel Indicators: Bank of 4 upstream lane active indicators (green), Bank of 8 downstream link active indicators (green)
Internal Indicators: Power In-range Indicators for +12V, +3.3V & VTT (red/green), Power on indicator for +1V (green), Bank of
5 board status indicators (red)
Power Consumption: 10W typical +12V @ .5, 3.3V @ 1.25A, 5Vaux @ 2.5mA
Temperature Range: 0° to 70°C (32° to 122°F)
Relative Humidity: 10 to 90% non-condensing
Shock: 30g acceleration peak (11ms pulse)
Vibration: 5-17 Hz 0.5: double amplitude displacement; 7-2000Hz, 1.5g acceleration
2.e. Backplane Specifications
20-Slot Configuration: One system host slot, 17 PCI Express x4 slots with x16 connectors, 2 PCI Express x8 slots with x16
connectors.
Power Connections: Two 24-pin ATX, Two 8-pin auxiliary power.
Industry Specification: PICMG 1.3 System Host Board PCI Express Specification
Power Indicators: +5V, -5V, +12V and +3.3V
Backplane I/O Connectors: 2 Ethernet ports, up to 4 USB ports, 8 fan tach inputs, 8 LED outputs, 4 general purpose outputs,
8 general purpose inputs.
Temperature Sensors: 3 near rear of chassis on backplane, 1 near front of chassis on backplane, 4 external temperature
sensor headers.
Temperature Range: Operating temp 0° to 60°C (32° to 140°F) ambient. Short-term (30min) operating temp 5°C to 55°C
ambient. Storage temp -40°C to 70°C
Relative Humidity: Operating humidity 10-90% @ 40°C (non-condensing) Non-operating humidity 0-95% @ 40°C (non-
condensing)
Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration.
