One Forall DVD EXPERT URC-4041 Manual de usuario

DVD EXPERT

Universal Remote Control

URC-4041

User’s Guide

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 1

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . 9

Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Programming A Master Power Macro . . . . . . . . . . . . . . . . 12

Programming The Power Key For The Master Power Macro . . . 12

Operating The Master Power Macro . . . . . . . . . . . . . . . . . . . . 12

Clearing The Master Power Macro . . . . . . . . . . . . . . . . . . . . . 13

Using Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Programming Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Restoring Keymoved Keys To Default Settings. . . . . . . . . . . . . 14

Restoring A Single Keymoved Key . . . . . . . . . . . . . . . . . . . . . . 14

Restoring All Keymoved Keys In A Single Mode . . . . . . . . . . . . . 14

Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Programming Favorite Channel Scan . . . . . . . . . . . . . . . 16

Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Locking Volume Control To One Mode

(Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Unlocking Volume Control For A Single Device

(Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Unlocking All Volume Control

(Restoring Default Setting ) . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setup Codes For Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 18

Setup Codes For Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 19

Setup Codes For Cable Boxes. . . . . . . . . . . . . . . . . . . . . . . . . 20

Setup Codes For DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 20

Setup Codes For Home-Theater-In-A-Box Devices. . . . . . . . . . 22

Setup Codes For PVRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setup Codes For Satellite Receivers . . . . . . . . . . . . . . . . . . . . 22

Setup Codes For Satellite Receiver/PVR Combos . . . . . . . . . . 23

Setup Codes For TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setup Codes For TV/DVD Player Combos. . . . . . . . . . . . . . . . . 27

Setup Codes For TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 27

Setup Codes For VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Setup Codes For VCR/DVD Player Combos . . . . . . . . . . . . . . . 30

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 2

INTRODUCTION

The One For All DVD Expert Universal Remote Control

(URC-4041) is designed to remotely operate up to four

home entertainment devices and features intuitive and

easy-to use buttons to operate a DVD component.Its

sophisticated technology will allow you to consolidate

your original home entertainment remote controls into

one easy-to-use product. Advanced features include:

• Intuitive buttons to allow easy access to functions

and menus on your DVD player and Home-Theater-

In-A-Box (HTIB) devices

• Direct code setup for easy device programming

• Step-and-Set code setup and Code Verification for an

alternate way to program devices

• Power macro for master on/off control of all of your

equipment with a single keystroke

• Volume Lock/Unlock feature to lock or unlock the

volume control to one mode or individual modes

• Device Key Re-Assignment to remotely control

a second (duplicate) device

• Favorite Channel Scan for easy channel surfing

• Color-coded keys to quickly locate popular functions

• Glow keys to aid operation when the ambient light

conditions are low

• Extensive code library for popular video and audio

devices including DVD players, PVR/DVRs, and

HTIB (Home-Theater-In-A-Box) devices.

The URC-4041 remote control requires two (2) new

AAA alkaline batteries (not included) and some easy

programming to control your devices. For best results,

please read and perform all instructions listed here.

Also, keep these instructions for future reference.

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 3

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the

One For All DVD Expert Universal Remote Control

(URC-4041) and then study the Key Charts (on the next

two pages) to learn how they function.

To find out what type of devices can be controlled by

each device key after programming, see the Device

Tab le on page 7.

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 4

Key Charts

When the LED (red light) blinks,the

remote control is working and (after

programming) is sending signals.

Press DVD/VCR,AUX,CBL/SAT,orTV

once to select a desired home

entertainment device to control.

Also see the Device Table on page 7.

Press POWER once to turn on or off

the selected device.For master

power control, see Programming

A Master Power Macro on page 12.

Use the keypad (1~ 9and 0) to

directly select channels (e.g., 009

or 031).

Use TV/VID to switch the TV’s input

to view TV or video programs.

Press ENTER once after entering

the channel numbers on some TVs.

Use GUIDE to display your selected

device’s program guide or setup

menu.

Press MENU once to display your

selected device’s main menu.

Use INFO/OSD to display the current

channel and program information

or on-screen directory.

Use EXIT to exit from your selected

device’s guide or menu.

Use the Cursor Keys to move the

cursor in the program guide and

menu screens.

Use SELECT to choose options from

your selected device’s menu or guide.

Press LAST once to recall the last

channel. For PVRs, use LAST to

select live or recorded video.

Use FAV to scan through all channels,

or after programming,to scan

through 10 favorite channels.

continued on next page...

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 5

FEATURES AND FUNCTIONS

Key Charts (continued)

Use CH▲(or CH▼) to select the

next higher (or lower) channel.

Press MUTE once to turn the sound

off or on.

In the DVD mode, press REPEAT

once to replay a selected chapter

(after pressing TITLE - see below).

Use VOL▲(or VOL▼) to raise (or

lower) the sound volume.

Use SLEEP to set the sleep timer on

a selected device if equipped with

this feature.

Use ANGLE to perform the angle

function on your DVD player.

Use AUDIO to select an alternate

audio channel (e.g., Spanish), if

available on your cable/satellite

service or DVD.

Press TITLE once to display (or turn

off) a DVD’s title information (e.g.,

chapters, settings, etc.) if available.

In the DVD mode, press ZOOM once

to zoom in on (or out of) a viewed

picture, if the function is available

on your DVD device.

Press SUBTITLE/CC once to display

(or turn off) subtitles or closed

captions, if available on your DVD

or cable/satellite service.

Use REW,PLAY,FWD,F.REW,PAUSE,

F.FWD,orSTOP to control your VCR,

PVR, DVD player, or VOD (Video

On Demand) if available on

your cable/satellite service.

Press REC twice to record a PVR or

VCR program.

Use SET for all programming

sequences.

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 6

Device Table

NOTE: Please refer to the table below when performing the

instructions in “Programming Device Control” on page 9.

After programming, the One For All DVD Expert

Universal Remote Control will be able to control the

following types of devices:

DEVICE KEY CONTROLS THESE TYPES OF DEVICES

DVD Players, TV/DVD Player Combos,VCRs,

TV/VCR Combos,VCR/DVD Player Combos,

Home-Theater-In-A-Box devices, or

PVR/DVRs (Personal or Digital Video

Recorders)

Audio Amplifiers or Receivers; also use for

second VCR or DVD player (see page 14,

Re-Assigning Device Keys

Cable Boxes (Converters), Satellite Receivers,

or Satellite/PVR Combos

Te l e v i s i o ns

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 7

INSTALLING BATTERIES

1. On the remote control’s back, push the tab

and lift off the battery cover.

2. Obtain two (2) new AAA alkaline batteries.

Match the + and – marks on the batteries

to the + and – marks in the battery case,

then insert the new batteries.

3. Press the battery cover back into place.

The tab should click when the cover is

locked.

4. Test the remote control by pressing

any mode key (e.g., TV). If the batteries are

inserted correctly, the LED (red light) will

blink once.

NOTE: When batteries need replacement, the remote control

will stop operating. Remove the old batteries and insert new

ones within 10 minutes to ensure all of your programming

information is restored.

❶

❸

❷

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 8

PROGRAMMING DEVICE CONTROL

The One For All DVD Expert Universal Remote Control

is preprogrammed at the factory to operate an RCA TV,

a Toshiba DVD player, a Motorola cable box, and a

Pioneer audio receiver/amplifier. To control devices other

than the default brands, perform the following steps;

otherwise skip this section:

1. Turn on a desired device (e.g.,VCR or

DVD player) and, if applicable, insert

media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely

before proceeding. Highlight or write down the

codes and device you wish to program before

starting step 2.

2. On the remote control,press a device key

once (i.e., DVD/VCR,AUX,CBL/SAT,orTV).

NOTE: To program control of a DVD device,

VCR, PVR (or DVR), VCR/DVD Combo, or

Home-Theater-In-A-Box device, press

DVD/VCR once.

NOTE: To program control of an Audio

Amplifier or Receiver, press AUX once.

NOTE: To program control of a Cable Box,

Satellite Receiver, or a Satellite Receiver/PVR

(or DVR) Combo, press CBL/SAT once.

NOTE: To program control of a TV/VCR Combo,

press DVD/VCR once. After programming, you

will be able to control channel selection, volume,

and VCR functions.

NOTE: To program control of a TV/DVD Player

Combo, press DVD/VCR once. After program-

ming,you will be able to control channel

selection, volume, and DVD functions.

3. Press and hold SET until the LED (red light)

blinks twice, then release SET.

4. Use the Manufacturer’s Codes (starting on

page 18) to locate the type of device and

brand name and then enter the first four-

digit code for your device. If performed

correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps

2 through 4 and enter the same code again.

continued on next page...

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 9

PROGRAMMING DEVICE CONTROL

(continued)

5. Aim the remote control at the device and

press POWER once. The device should turn

off. If it does not, repeat steps 2 through 5

(starting on the previous page), trying

each code for your brand until you find

one that works.If it still doesn’t work, try

Searching For Your Code below.

NOTE: If the device does not have a POWER

key, press the (Play) key.

6. Repeat steps 1 through 5 (starting on the

previous page) for each device you want to

control. For future reference, write down

each working device code in the following

boxes:

DVD/VCR Code:

Device Type:____________________

AUX Code:

Device Type:____________________

CBL/SAT Code:

Device Type:____________________

TV Code:

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control

after trying all codes listed for your brand, or if your

brand is not listed at all, try searching for your code.

NOTE: Before performing a code search for a CD or DVD player

or a VCR, turn on the device and insert the required media.

For example, to search for a code for your TV:

1. On the remote control, press TV once.

2. Press and hold SET until the LED (red light)

blinks twice, then release SET.

3. Enter 9- 9- 1.TheLED will blink twice.

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Control remoto universal de One Forall

One Forall

One Forall URC-7940 Manual de usuario

One Forall

One Forall Kameleon URC-9964B00 Manual de usuario

One Forall

One Forall URC-8350 Manual de usuario

One Forall

One Forall URC8820N Manual de usuario

One Forall

One Forall URC-7781 Manual de usuario

One Forall

One Forall Home Producer URC 9800 Manual de usuario

One Forall

One Forall URC-6231 Manual de usuario

One Forall

One Forall URC-7730 Manual de usuario

One Forall

One Forall URC-7556 Manual de usuario

One Forall

One Forall URC-3720 Manual de usuario

One Forall

One Forall Universal remote Manual de usuario

One Forall

One Forall URC-3445 Guía del administrador

One Forall

One Forall URC-6210 Manual de usuario

One Forall

One Forall Xsight Colour Manual de usuario

One Forall

One Forall KAMELEON 5 Manual de usuario

One Forall

One Forall ONE FOR ALL Manual de usuario

One Forall

One Forall SPORT Manual de usuario

One Forall

One Forall URC 1635 Manual de usuario

One Forall

One Forall URC-4063 EASY 4 Manual de usuario

One Forall

One Forall Zapper URC-6512 Manual de usuario

One Forall

One Forall URC-7556 Manual de usuario

One Forall

One Forall URC-6230 Manual de usuario

One Forall

One Forall URC-7556 Manual de usuario

One Forall

One Forall URC-2981 Manual de usuario

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario