Omron EQUO Series Guía del usuario

・To directly connect KM-N1-FLK, KM-N2-FLK and

KM-N3-FLK to ZN-KMX21-□, please purchase a

separately sold dedicated connection cable

ZN9-KMC30-N.

Communications Setup for KM-N1 (e.g. configuring communication speed as 38400bps)

After the power is turned on, press and hold the MODE key to enter the "Setting Mode". In the Common Setting, configure the communication speed as 38.4kbps. The

communication address of the enabled circuit must be a serial number from the circuit A and must not be the same as those of other circuits and/or connected KM series

units.

Communications Setup for KM-N2/N3 (e.g. configuring communication speed as 38400bps)

After the power is turned on, press and hold the MODE key to enter the "Setting Mode". Type the password ("0001" by default) In the Common Setting, configure the protocol

as CompoWay/F, communication speed as 38.4kbps, data length as 7 bits, and stop bits as 2 bits. The communication address of the enabled circuit must be a serial number

from the circuit A and must not be the same as those of other circuits and/or connected KM series units.

Terminal names may differ depending on the model type.

See below to make communication setting of the KM series.

Unit No.: A consecutive number starting from 1.

To change the starting number (other than 1), other setting is required.

Baud rate: 38400 bps

Data bit length: 7-bit

Stop bit length: 2-bit

Vertical parity: even

Power Monitor KM-N1-FLK,KM-N2-FLK,

KM-N3-FLK

For further information, refer to the Instruction Sheet in the package

and a user's manual.

Recommended SD card:

HMC-SD291(2GB)/HMC-SD491(4GB)

Recommended SD card:

HMC-SD291(2GB)/HMC-SD491(4GB)

User’ s Manual is downloaded in a PC from following URL.

http://www.fa.omron.co.jp/products/family/3080/download/manual.html

Installing the software Multi Data Viewer Light

Visit the following link and download the installation ﬁle.

http://www.fa.omron.co.jp/multi-d-v-e

First, you need to install the software Multi Data Viewer Light to your computer.

Multi Data Viewer Light comprises the following: summary/display tool, setting/logging tool and instant value display tool.

■System Requirements

■Installation

OS: Windows 7 SP1/Windows 10

* .NET Framework 3.5 SP1 or later is required.

CPU: Intel(x86)-compatible processor, 1.5GHz or higher

Memory: 2GB (32-bit OS)/3GB (64-bit OS), 3GB or higher recommended

Extract the installation ﬁle to any folder, and run Setup.exe in the folder. The screen on the right appears.

For installation, you must log in with Administrator permissions.

.NET Framework 3.5 SP1 in your computer to install the software must be enabled.

For how to install and use Multi Data Viewer Light, refer to Multi Data Viewer Light software manual in the

installation ﬁle.

HDD: 1GB or more free disc space required

Display: Resolution of 1024x768 or higher, 65536 colors (16-bit color) or more

LAN port: 10BASE-T/100BASE-TX supported (for network connection)

SD card reader/SD card slot: For loading data from the unit

Authorized Distributor:

In the interest of product improvement,

specifications are subject to change without notice.

OMRON Corporation Industrial Automation Company

OMRON ELECTRONICS LLC

2895 Greenspoint Parkway, Suite 200

Hoffman Estates, IL 60169 U.S.A.

Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69, 2132 JD Hoofddorp

The Netherlands

Tel: (31)2356-81-300/Fax: (31)2356-81-388

Contact: www.ia.omron.com

Kyoto, JAPAN

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road # 05-05/08 (Lobby 2),

Alexandra Technopark,

Singapore 119967

Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

PuDong New Area, Shanghai, 200120, China

Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Otros manuales para EQUO Series

Este manual sirve para los siguientes modelos

Otros manuales de Instrumento de medición de Omron

Omron

Omron K3MA-L Manual de usuario

Omron

Omron K3NX Manual de usuario

Omron

Omron K3NP Manual de usuario

Omron

Omron EQUO Series Manual de usuario

Omron

Omron KM50 Manual de uso y cuidado

Omron

Omron ZN-DPX21-S Series Manual de usuario

Omron

Omron Sti G9SX-SM032 Series Manual de usuario

Omron

Omron K3GN Manual de usuario

Omron

Omron K3TJ Manual de usuario

Omron

Omron K7DD Manual de usuario

Omron

Omron K7GE-MG Manual de usuario

Omron

Omron SYSMAC Series Manual de uso y cuidado

Omron

Omron M16 - Manual de usuario

Omron

Omron HEM-CS24 Manual de usuario

Omron

Omron K3NH Manual de usuario

Omron

Omron K3HB-R Manual de usuario

Omron

Omron F3UV Series Manual de usuario

Omron

Omron Sti G9SX-LM224-F10 Series Manual de usuario

Omron

Omron Z500 Series Manual de usuario

Omron

Omron G9SX-SM Manual de usuario

Omron

Omron K3GN Manual de usuario

Omron

Omron Supergate 8615 Manual de usuario

Omron

Omron K3NC Manual de usuario

Omron

Omron G9SX-LM Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario