Olympus VS120 Manual de usuario
User’s Manual
[Simple Operation]
VS120
Virtual Slide System
Notice
This manual describes simple operating procedures so as the person who uses it for the
first time can use with use.
For detail information, refer to [Hardware] of the attached Instructions and [Online Manual]
of software
After reading this manual carefully, keep it in a safe place.
A X 8 0 3 6
CAUTION
Reproduction, copying or duplication of a part or all of this software and manual is prohibited.
Registered Trademarks
Microsoft, Microsoft Windows are registered trademarks of Microsoft Corporation.
Adobe, Adobe Flash Player are registered trademarks of Adobe Systems Incorporated.
Other brand names and product names are trademarks or registered trademarks of their
respective owners.
Contents
Contents
Contents i
1 Acquiring Images 1
1-1 VS120-L100·························································································· 1
1-2 VS120-S5 ··························································································· 11
1-3 VS120-S1 ··························································································· 19
1-4 Setting Focus Logic ········································································· 29
1-5 Changing the Save Location for Acquired Images ······················· 30
2 Databases 31
2-1 Opening Database ············································································ 31
2-2 Registering Images··········································································· 32
2-2-1 2-2-1 Registering Image Files on a Hard Disk Drive ······································ 32
2-2-2 Registering Image Files after Viewing ···························································· 33
2-3 Setting Permission for Images························································ 34
2-4 Viewing Images················································································· 35
3 Using Scan Projects 36
3-1 Saving Scan Projects ······································································· 36
3-2 Roading Scan Projects····································································· 36
Acquiring Images / VS120-L100
1
Page
1 Acquiring Images
1-1 VS120-L100
This section describes how to acquire images of several slide glasses by using the automatic transport function.
For this purpose, the following modes are available:
Quick Batch: It is to acquire images automatically without making precise settings.
When this mode is selected, follow procedures in the sections whitch carry (Quick Batch) marks
on top of the sections.
Expert Batch:It is to acquire images by setting the scanning area (XY) and focus.
When this mode is selected, follow procedures in the sections whitch carry (Expert Batch)
marks on top of the sections.
1 Starting Up the System (Quick Batch) (Expert Batch)
First, turn on the monitor , followed by the
microscope control box , slide loader , and
controller to start up the system.
After the system has started up, double click the
[VS-ASW] icon on the desktop to start up the
software and begin adjustment of the stage.
Acquiring Images / VS120-L100
2 Page
2 Placing a Slide Glass (Quick Batch) (Expert Batch)
Place slide glasses in the cassette.
Before placing slide glasses in the cassette,
wipe the glasses free of dust, etc.
Open the cassette cover of the slide loader.
Place the cassette in the designated part of the
loader.
Close the cassette cover of the slide loader.
1
25
26
50
Acquiring Images / VS120-L100
3
Page
3 Selecting Scan Mode (Quick Batch) (Expert Batch)
Select on the upper right of the screen.
Click or .
After clicking the button, do not open or close
the cassette cover.
The locations where the slide glasses have been
placed are detected.
Acquiring Images / VS120-L100
4 Page
4 Setting Slide Glass Information (Quick Batch) (Expert Batch)
Set information for each slide glass if necessary. It is possible to acquire the image
without setting any information.
Click the slide.
If you do not need to set slide glass information for
the slide, go to step .
Enter slide glass information.
Click to select the next slide.
Repeat steps and for all the slides for
which you need to set slide glass information.
Click .
Acquiring Images / VS120-L100
5
Page
5 Selecting the Objective Lens (Quick Batch) (Expert Batch)
Click the Objective Lens button that you want to
use.
(The check mark appears on the selected
objective lens button.)
To change the optional settings, go to step below.
If you do not need to change the optional settings, go to
step .
To capture the image in Z mode, click (Scan one
Z plane) button and then click [Virtual Z].
For more information, refer to the online help.
If you are using a database, you can set the location for
saving captured images to the hard disk drive (default)
or database.
To save captured images to the database, refer to
Section “1-5 Changing the Save Location for Acquired
Images” (page 30).
Click .
The [More Options] window appears.
Change the necessary settings in the [More
Options] window and click .
Click (Apply settings to all slides of all
cassettes).
The slides to which the settings have been
assigned turns yellow.
Acquiring Images / VS120-L100
6 Page
6 Acquiring an Overview Image (Expert Batch)
When setting is complete, click
.
(The 2x objective lens is used for scanning.)
Avoid movement or vibration of the system
during scanning of overview images.
Otros manuales para VS120
1
Tabla de contenidos
Otros manuales de Microscopio de Olympus
Olympus
Olympus FH Manual de usuario
Olympus
Olympus IX70 Manual de usuario
Olympus
Olympus U-MDOB3 Manual de usuario
Olympus
Olympus AH3 Instrucciones de funcionamiento
Olympus
Olympus U-UVF248 Manual de usuario
Olympus
Olympus BX51 Manual de usuario
Olympus
Olympus SZ61 Manual de usuario
Olympus
Olympus CH2 Series Instrucciones de funcionamiento
Olympus
Olympus BX53 Manual de usuario
Olympus
Olympus BH2-6RE Manual de usuario
Olympus
Olympus STM7 Manual de usuario
Olympus
Olympus MX61 Manual de usuario
Olympus
Olympus CX41 Manual de usuario
Olympus
Olympus PM10SP Guía de instalación
Olympus
Olympus CX43 Manual de usuario
Olympus
Olympus CK2 Manual de usuario
Olympus
Olympus BX51 Manual de usuario
Olympus
Olympus VANOX Instrucciones de funcionamiento
Olympus
Olympus Fluoview-1000 Manual de usuario
Olympus
Olympus BH2-CH Substage Manual de usuario
