Olympus DSX1000 Manual de usuario
Contents
(1) Introduction
(2) Preparation for observation
(3) Selection of observation modes
(4) Image processing method
(5) Image acquisition
(6) Saving acquired images
Basic
Quick Reference Guide
Digital Microscope
DSX1000
AX9342 02
Introduction
Reference information
Operating procedure
Basic
1
Introduction User interface
Software Console
[2D Acquisition] button
Performs the snapshot
acquisition.
[3D Acquisition] button
Performs the quick scan
acquisition.
Image processing button
Executes various image
processings.
[◄/►] button
Changes the observation
modes sequentially.
[▲/▼] button
Moves up and down the
zoom head.
[Joystick]
Moves the motorized stage.
1
[Move focus] button
Moves up and down the
zoom head.
[Observation mode] button
Changes the observation mode.
[Image processing] panel
Used to correct the image.
[Move] button
Moves the motorized stage.
[Image acquisition] panel
Used to perform image
acquisition.
Operating procedure
Reference information
Introduction
Basic
2
Preparation for observation Sample set
1. Start the system (in a state of bright-field observation).
2. Set a sample on the stage.
3. Move the zoom head to bring the sample into focus.
4. Move the stage back/forth and left/right to place the
position desired to be observed on the center.
* For “Up/Down movement of zoom head”, “Back/Forth and Left/Right movement of stage”, and “Usage of Focus assist bar”, please refer to the Instruction Manual.
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Software Console
Useful
operation * Pulling out the Focus assist bar helps
you to roughly find the focus point.
3. [▲/▼] button
Moves up and down the
zoom head.
4. [Joystick]
Moves the motorized stage.
Preparation for
observation
2
4. [Move] button
Moves the motorized stage.
3. [Move focus] button
Moves up and down the
zoom head.
3
Select the best image
1. Click the [Best image] button.
2. Click the [ALL MODES] button from the [Find best image] tab.
3. Select the desired image on the best image screen.
4. Click the [Apply] button.
Software
Useful
operation
[◄/►] button
Changes the observation modes
sequentially.
* Direct observation mode is also available.
Console
[Observation mode] button
Changes to the appropriate
observation mode.
Operating procedure
Reference information
Introduction
Basic
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Preparation for
observation
3
Selection of observation modes
3. Best image screen
Select the desired image
on the best image screen.
2.
[ALL MODES] button
4. [Apply] button
1. [Best image] button
4
Image processing method
Live image processing is available
1.
Select an appropriate image processing method from among four modes on the [Image processing] panel.
When the image processing is enabled, the corresponding button is highlighted.
Software Console
Image processing button
Executes various image processings.
When the image processing is enabled, the
corresponding LED lights up.
* Clicking the [Accessory] tab - [Live
measurement] button enables you to
perform the measurement during the
live operation. For details, please refer
to the Instruction Manual.
Useful
operation
Texture enhancement
Enhances the uneven state.
Anti-halation
Curbs various reflections.
Contrast UP
Enhances the contrast.
Depth of focus UP
Deepens the focusable
distance.
Operating procedure
Reference information
Introduction
Basic
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Preparation for
observation
4
[Image processing] panel
Adjusts the image quality
to optimal level.
5
Image acquisition 2D Acquisition and 3D Acquisition
can be easily conducted
1. Click [2D Acquisition] button.
Once the image acquisition is completed, the analysis application will be started to display
the acquired image.
[2D Acquisition] button
Performs the snapshot
acquisition.
2D
Acquisition
1.
Select from the [3D] from the [Image acquisition] panel and click the [3D Acquisition] button.
Once the image acquisition is completed, the analysis application will be started to display
the acquired 3D image.
3D
Acquisition
Software Console
[3D Acquisition] button
Performs the quick scan
acquisition.
Operating procedure
Reference information
Introduction
Basic
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Preparation for
observation
5
[3D Acquisition] button
[2D Acquisition] button
6
Saving acquired images
1. Select [Save As] from the [File] menu.
The [Save as] screen will appear.
2. Select the format of the file to be saved from the [File type]
drop-down list.
3. Select a location to save the file.
4. Enter the file name in the [File name] field.
5. Click the [Save] button.
The file will be saved.
Saving the image data
Analysis application
Operating procedure
Reference information
Introduction
Basic
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Preparation for
observation
6
Useful
operation
● Desire to display [Save As] dialog
on every acquisition
Advanced settings > Image
acquisition > [Save As]
●
Desire to designate the name of a
file desired to be automatically saved
Advanced settings > Image
acquisition > [Auto save]
DSX1000 basic software
DSX1000 basic software
[File] menu
7
Contents
(1) Operation of tilt observation
(2) Operation of Rotatable stage
(3) Replacement of objective and option unit
(4) List of objectives and corresponded
observation modes
(5) Objectives and attachment management
(6)
Items often referred in the Instruction Manual
(7) Configuration of the Instruction Manual
Advanced
Quick Reference Guide
Digital Microscope
DSX1000
Operating procedure
Reference information
Introduction
Advanced
1
Operation of tilt observation
1. Press the [Tilt Position] button on the GUI or [Tilt Position] button on the console.
2. Adjust the focus with the Focusing knob
3. Rotate the Tilting lock lever to release the tilting lock.
4. Tilt the head holding the Rotation-release knob on the head arm.
5. Stop the head at an arbitrary position and release your hand from
Rotation-release knob.
Operation of tilt
observation
Operation of
Rotatable stage
Replacement of
objective and
option unit
List of objectives
and corresponded
observation modes
Objectives and
attachment
management
Items often
referred in the
Instruction Manual
Configuration of the
Instruction Manual
Software Console
1.
[Tilt Position] button
* Aligning the upper surface of the sample to the horizontal
line helps you to roughly adjust the focusing.
9
2. Focusing knob
4.
Rotation-release
knob
3. Tilting lock
lever
1. [Tilt Position]
button
Otros manuales para DSX1000
1
Tabla de contenidos
Otros manuales de Microscopio de Olympus
Olympus
Olympus bx40 Manual de usuario
Olympus
Olympus BX43 Manual de usuario
Olympus
Olympus DSX1000 Manual de usuario
Olympus
Olympus FLUOVIEW FV300 Guía de instalación
Olympus
Olympus BX60 Manual de usuario
Olympus
Olympus IX81 Manual de usuario
Olympus
Olympus CHD Manual de usuario
Olympus
Olympus BHTP Manual de usuario
Olympus
Olympus Fluoview FV1000 Manual de usuario
Olympus
Olympus DSX510 Manual de usuario
Olympus
Olympus U-CBS Manual de usuario
Olympus
Olympus SZX10 Manual de usuario
Olympus
Olympus BX-URA2 Manual de usuario
Olympus
Olympus BX3-URA Manual de usuario
Olympus
Olympus CHA-P Manual de usuario
Olympus
Olympus DP22 Manual de usuario
Olympus
Olympus BX51 Manual de usuario
Olympus
Olympus MX50A/T Manual de usuario
Olympus
Olympus K Instrucciones de funcionamiento
Olympus
Olympus SZX7 Manual de usuario
