Olympus U-APT Manual de usuario

INSTRUCTIONS

U-APT

ARROW POINTER

This instruction manual is for the Olympus Arrow Pointer Model U-APT. To ensure the safety, obtain

optimum performance and to familiarize yourself fully with the use of this attachment, we recommend that

you study this manual thoroughly before operating the microscope. Retain this instruction manual in an

easily accessible place near the work desk for future reference.

A X 9 8 9 7

Optical Microscope Accessory

In accordance with European Directive on Waste Electrical and Electronic Equipment, this

symbol indicates that the product must not be disposed of as unsorted municipal waste, but

should be collected separately.

Refer to your local Olympus distributor in EU for return and/or collection systems available in

your country.

For Korea only

ࣾ匏ࣜ匶匶ࣜࣜࣤ儆洛殯ࣜ愯暧皻柦匶沖沲ࣥ

決ࣜ匶匶垚ࣜ儆洛殯ࣤࣾ匏ࣥࣜ洊沖砒洇穯匶匶嵢昢ࣜ渂嵢ࣜ儆洛櫖昢ࣜ斲殯穞垚ࣜ冉汊

徯洇求嵢ࣜ穞彶ࣨࣜ微姦ࣜ滆櫳櫖昢ࣜ斲殯穦ࣜ朞ࣜ沎枻城埪࣪

This product is applied with the requirements of standard IEC/EN61326-1 concerning

electromagnetic compatibility.

- Immunity Applied to industrial and basic environment requirements.

U-APT

CONTENTS

Correct assembly* and adjustments are critical for the arrow pointer to exhibit its full performance. If you are going to assemble the

attachment yourself, please carefully read Chapter 4, “ASSEMBLY” (pages 10 to 11).

IMPORTANT — Be sure to read this section for safe use of the equipment. — 1-4

1 CONTROLS 5

2 OPERATION 6-8

2-1 Focus Adjustment of the Arrow Pointer.......................................................................................................................................................................... 6

2-2 Pointer Operation ............................................................................................................................................................................................................................................ 7

2-3 Notes on Photomicrography .......................................................................................................................................................................................................... 8

3 SPECIFICATIONS 9

4 ASSEMBLY 10-11

1Adjusting the Pointer Brightness; 2 Selecting the Pointer Color;

3Moving the Pointer

PROPER SELECTION OF THE POWER SUPPLY CORD ........................................................................................................................ 12-15

IMPORTANT

This system employs a UIS (Universal Infinity System) optical design, and should be used only with UIS micro-

scopes, eyepieces, objectives and condensers for the BX2 series. (Some of the modules designed for the BX

series are also usable. For details, please consult Olympus or the catalogues.) Less than optimum performance

may result if inappropriate accessories are used.

1Getting Ready

1. This manual pertains only to the arrow pointer. Before using this attachment together with the microscope and associated

options, make sure that you have carefully read and understood their manuals, and understand how the system should

be operated together.

2. This system has a field number of 22. When the arrow pointer is combined with a superwide-field observation tube, the

pointer cannot be moved around the entire range of the field of view. Also note that a ghost of pointer may be observed

in such a case.

3. If the eyepiece in use incorporates a micrometer, ghost may be observed with dark specimens.

4. Always use the power cord and AC adapter provided by Olympus. If no power cord is provided, please select the proper

power cord by referring to the section “PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of this instruction

manual. If the proper power cord is not used, product safety and performance cannot be guaranteed.

5. To ensure safety, disconnect the power plug of the AC adapter from the power outlet after operation.

6. The AC adapter cord should be fixed with the provided stoppers at a position that does not come in the way of operation.

Take special care so that the cord does not contact the lamp housing.

U-APT

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment in

the safest possible manner.

Supply DC current (from the provided AC adapter).

Indicates an input jack.

Indicates a pointer.

Symbol Meaning

2 Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).If a lens is stained with fingerprints or oil smudges, wipe it gauze

slightly moistened with commercially available absolute alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully. Be sure to keep it away from open

flames or potential sources of electrical sparks —— for example, electrical equipment that is being switched on or

off. Also remember to always use it only in a well-ventilated room.

2. With any part of the arrow pointer other than glass components gets dirty, do not use organic solvents. If a plastic part gets

dirty, use a cloth moistened with a diluted neutral detergent.

3. Do not disassemble any part of the arrow pointer. This could result in malfunctions or reduced performance.

4. When the arrow pointer is not used, make sure to put the dust cover on it.

Observation tube

Arrow pointer

U-APT

Drawing

attachment

U-DA

Magnification

changer

U-CA

U-ECA

Intermediate

tube

for AN360

U-OPA

Polarizing

intermediate

tube

U-CPA

Reflected

illuminator

U-RLA

Universal

illuminator

BX-URA2

Fluorescence

illuminator

BX-RFA

Microscope frame

BX40

BX50

Microscope frame

BX41

BX51

BX52

Microscope frame

BX45

BX46

BX60

Universal

illuminator

U-URA

Microscope frame

BX43

BX53

Universal

reflected

illuminator

BX3-URA

Coded

fluorescence

illuminator

BX3-RFAS

5. When the arrow pointer is used with the BX40, BX41, BX43, BX45, BX46, BX50, BX51, BX52, BX53, BX60 microscope frame,

only one intermediate attachment can be mounted in a 2-level configuration.

However, the usable intermediate attachment is restricted depending on whether it is mounted above or below the arrow

pointer.

· The only intermediate attachments that can be used on top of the arrow pointer is the U-EPA or U-EPA2 eyepoint adjuster.

For the intermediate attachments that can be used below the arrow pointer, consult the following sketch and select the

optimum one.

U-APT

If the system is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the

system equipment may also be damaged. Always use the system as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

3Caution

CONTROLS

Arrow Pointer U-APT Pointer control lever (Page 6)

AC adapter input connector

Pointer brightness control (Page 6)

OFF/Continuously variable

Pointer color switch lever (Page 6)

Up: Red. Middle: Shielded. Down: Green.

Tube mounts

Output plug

Input connector

AC Adapter

U-APT

Fig. 1

Fig. 2

OPERATION

2-1 Focus Adjustment of the Arrow Pointer (Figs 1 & 2)

}For use in focusing of the pointer, one of the eyepiece sleeves should be

equipped with a helicoid (or a focusing mask).

1. Turn the pointer brightness control @ of the arrow pointer clockwise to

turn on the pointer ( ).

}Set the pointer color switching lever ² to other position than the middle

position. If the pointer cannot be seen in the field of view, move the pointer

at the center of field using the pointer control lever ³.

2. Looking into the eyepiece sleeve without the diopter adjustment ring, turn

the helicoid | of the eyepiece to focus on the pointer.

3. Looking into the eyepiece sleeve with the diopter adjustment ring, turn the

diopter adjustment ring ƒ to focus on the pointer.

4. Turn the coarse and fine focus adjustment knobs of the microscope to

focus on the specimen.

2-2 Pointer Operation

}Light intensity alignment range of the pointer has been set to comply with

a dark specimen, such as the case of fluorescence observation. For this

reason, in case of brightfield observation with high light illumination, you

may feel it difficult to identify the pointer even by rotating the pointer bright-

ness control dial which is not defect of this product.

1. While looking into the eyepiece, turn the pointer brightness control @

clockwise to vary the brightness continuously.

2. Turning the control to the fully counterclockwise position switches it off.

Using the pointer color switching lever ² select a color which is clearly

distinguishable from the specimen color.

· Top position: Red

· Middle position: Light shielded.

· Down position: Green

Fig. 3

1Adjusting the Pointer Brightness (Fig. 3)

2Selecting the Pointer Color (Fig. 3)

Fig. 4

3Moving the Pointer (Fig. 4)

Move the pointer to the desired location in the field of view by operating

the pointer control lever @ on the front of the arrow pointer.

}When the pointer is not used, move it away from the field of view or set the

pointer color switching lever to the middle position.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Olympus

Olympus

Olympus BH-NRE Manual de usuario

Olympus

Olympus U-PCD2 Manual de usuario

Olympus

Olympus SZX-SDO2 Manual de usuario

Olympus

Olympus OER-Elite Manual de usuario

Olympus

Olympus RollerFORM Manual de usuario

Olympus

Olympus SZX-RFL3 Manual de usuario

Olympus

Olympus OER-Pro Manual de usuario

Olympus

Olympus SZX2 Series Manual de usuario

Olympus

Olympus U-AFA2M-VIS Manual de usuario

Olympus

Olympus U-RFLT50 Manual de usuario

Olympus

Olympus CKX-CCSW Manual de usuario

Olympus

Olympus SZX-RFL2 Manual de usuario

Olympus

Olympus U-DO3 Manual de usuario

Olympus

Olympus SZ2-ILLC Manual de usuario

Olympus

Olympus 72DL PLUS Manual de usuario

Olympus

Olympus HysteroFlow Manual de usuario

Olympus

Olympus U-SRG Manual de usuario

Olympus

Olympus SZX-DO Manual de usuario

Olympus

Olympus SZX2-ILR66 Manual de usuario

Olympus

Olympus OMCL-TR800PSA Manual de usuario

Olympus

Olympus BioLever mini Manual de usuario

Olympus

Olympus CX-DO Manual de usuario

Olympus

Olympus CIX100 Manual de usuario

Olympus

Olympus AL120-6 Series Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario