NXP Semiconductors PN7150 Manual de usuario

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

Rev. 1.2 — 25 July 2018

373112

Application note

COMPANY PUBLIC

Document information

Info

Content

Keywords

OM5578, PN7150, BeagleBone, NFC, P2P, Card Emulation, Linux,

Android

Abstract

This document gives a description on how to get started with the OM5578

PN7150 NFC Controller SBC Kit on BeagleBone Black platform.

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

2 of 16

Contact information

For more information, please visit:

http://www.nxp.com

Revision history

Rev

Date

Description

1.2

20180725

Updated weblinks

1.1

20170222

Updated demo images weblinks

1.0

20150518

First official release version

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

3 of 16

1. Introduction

This document gives a description on how to get started with the OM5578 PN7150 NFC-

Controller SBC Kit on BeagleBone Black platform. This document provides a step by

step guide to the installation procedure of the hardware and the software. Finally, it

shows PN7150 NFC Controller functionalities through demonstration application.

1.1 OM5578/PN7150BBB demo kit

OM5578/PN7150BBB kit is a high performance fully NFC compliant expansion board for

BeagleBone Black (refer to [1] for more details). It meets compliance with Reader mode,

P2P mode and Card emulation mode standards. The board features an integrated high-

performance RF antenna to insure high interoperability level with NFC devices.

The demo kit is comprised of a PN7150 NFC Controller Board, a dedicated interface

board, and a NFC Sample Card.

OM5578/PN7150S

PN7150 NFC Controller Board

OM29110BBB

BeagleBone Interface Board

NTAG216

NFC Sample Card

Fig 1. OM5578/BBB kit overview

The demo kit is fully described in UM10935 document [4].

1.2 Linux driver support

PN7150 NFC Controller is supported under GNU/Linux system using the NXP Linux

libnfc-nci software stack delivered through public GitHub repository

https://github.com/NXPNFCLinux/linux_libnfc-nci (for more details, refer to AN11697 [2]).

1.3 Android driver support

PN7150 NFC Controller is supported from the official Android Open Source Project (refer

to [5] for more details) with the addition of dedicated patches (refer to AN11690 [3]).

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

4 of 16

2. Quick Startup on BeagleBone

2.1 Required items

• BeagleBone Black [1]

• MicroSD card of at least 4 Gb (8 Gb for Android demo image)

• 5V adapter to power the BeagleBone (Note:Micro USB cable doesn’t provide the 5V

required by the antenna supply of the OM5578/PN7150S board. Without it no RF

field can be generated by the OM5578).

• USB Keyboard

• USB Mouse

• USB Hub to connect both Mouse and Keyboard to the BeagleBone

• HDMI cable to connect to a Monitor / TV

• Computer (running Windows, Linux or Mac OS X) for MicroSD card installation

• BeagleBone demo image file (see [6])

2.2 Hardware setup

First of all, assemble the PN7150 NFC Controller Board with the BeagleBone Interface

Board.

Fig 2. OM5578/PN7150S BeagleBone configuration

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

5 of 16

Then stacked together the boards with the BeagleBone.

Fig 3. OM5578/PN7150S and BeagleBone Black stacked together

2.3 Software setup

Prepare a MicroSD card, with the downloaded BeagleBone demo image (see [6]),

following the installation guidelines. First extract the “.img” file from the archive, then

flash it on the microSD card according to below guidelines.

2.3.1 On Windows

Insert the MicroSD card into your computer (note the device drive letter), and using

Win32 Disk Imager, write the image into it:

Fig 4. Win32 Disk Imager

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

6 of 16

2.3.2 On Linux

Insert the MicroSD card into your computer and determine the device node assigned to it

(ignore the device number; e.g. /dev/sdb, not sdb1):

$ sudo dmesg | tail -20

[95300.848154] usb 2-1: new high-speed USB device number 33 using ehci-pci

[95300.983859] usb 2-1: New USB device found, idVendor=14cd, idProduct=6d00

[95300.983872] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2

[95300.983880] usb 2-1: Product: USB 2.0 SD/MMC READER

[95300.983888] usb 2-1: Manufacturer: SDMMC M121

[95300.983895] usb 2-1: SerialNumber: 800340070270

[95300.984593] usb-storage 2-1:1.0: USB Mass Storage device detected

[95300.984882] scsi18 : usb-storage 2-1:1.0

[95301.985555] scsi 18:0:0:0: Direct-Access USB 2.0 SD/MMC Reader PQ: 0 ANSI: 0 CCS

[95301.986856] sd 18:0:0:0: Attached scsi generic sg2 type 0

[95301.988277] sd 18:0:0:0: [sdb] Attached SCSI removable disk

Fig 5. Identifying device number under Linux

Then, unmount the device node using following command:

sudo umount /dev/devicenode

Finally flash the image to the device node using following command:

sudo dd if=path_to_image_file.img of=/dev/devicenode bs=1M

2.3.3 On MAC OS X

Using PiFiller (see https://learn.adafruit.com/beaglebone-black-installing-operating-

systems/mac-os-x), select the image file then insert the MicroSD card into your computer

to flash it.

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

7 of 16

2.4 Linux NFC demo application

2.4.1 Application details

The demo application is part of the Linux libnfc-nci stack available on public GitHub

repository https://github.com/NXPNFCLinux/linux_libnfc-nci. The related source code can

then be found there (more details in document AN11697 [2]).

2.4.2 Starting Linux NFC demo

Insert the MicroSD card in the BeagleBone. Connect HDMI Display, mouse and

keyboard via the USB Hub. Finally supply the BeagleBone using 5V adapter.

The BeagleBone boots and displays the bone-debian GUI:

Fig 6. bone-debian GUI

Open a terminal and browse to the Linux libnfc-nci stack directory (refer to chapter 1.2 for

more details about the Linux NFC software stack).

$ cd ~/linux_libnfc-nci

The application requires parameters to run:

$ ./nfcDemoApp <OPTIONS>

You can get the parameters details by launching the application help menu:

$ ./nfcDemoApp –-help

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

8 of 16

Fig 7. Linux demo application commands

The demo application offers 3 modes of operation:

•Polling: continuously waiting for a remote NFC device (tag or peer device) and

displays related information

•Tag writing: allows writing NDEF content to a NFC tag

•Device push: allows pushing NDEF content to a remote NFC peer device

2.4.2.1 Polling mode

When in this mode, the application will display information of any discovered NFC tags or

remote NFC device.

It is reached starting the application with “poll” parameter:

$ ./nfcDemoApp poll

Fig 8. Linux demo application polling mode

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

9 of 16

2.4.2.2 Tag writing mode

This mode allows writing data to an NFC tag. It is reached using “write” parameter:

$ ./nfcDemoApp write <OPTIONS>

Fig 9. Linux demo application tag writing mode

You can get more information about the message format using “-h” or “--help” parameter:

$ ./nfcDemoApp write –-help

2.4.3 Device push mode

This mode allows pushing data to a remote NFC device (e.g. an NFC phone). It is

reached using “push” parameter:

$ ./nfcDemoApp push <OPTIONS>

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

10 of 16

Fig 10. Linux demo application device push mode

You can get more information about the message format using “-h” or “--help” parameter:

$ ./nfcDemoApp push –-help

2.5 Android NFC demo

Insert the MicroSD card in the BeagleBone. Connect HDMI Display, mouse and

keyboard via the USB Hub. Finally supply the BeagleBone using 5V adapter.

After a few seconds Android boots up, NFC is then running, ready to read tags or interact

with remote NFC device (e.g. NFC phone).

Fig 11. Android home screen

Otros manuales para PN7150

Tabla de contenidos

Otros manuales de Hardware de computadora de NXP Semiconductors

NXP Semiconductors

NXP Semiconductors LX2160ARDBGSG Manual de usuario

NXP Semiconductors

NXP Semiconductors FRDM665SPIEVB Manual de usuario

NXP Semiconductors

NXP Semiconductors FRDM-K32L2A4S Manual de usuario

NXP Semiconductors

NXP Semiconductors UM11673 Manual de usuario

NXP Semiconductors

NXP Semiconductors i.MX 8M Plus Manual de usuario

NXP Semiconductors

NXP Semiconductors QN908 series Manual de usuario

NXP Semiconductors

NXP Semiconductors Android Manual de usuario

NXP Semiconductors

NXP Semiconductors QSG ADC1x13D+ECP3 DB Manual de usuario

NXP Semiconductors

NXP Semiconductors i.MX 6Dual Manual de usuario

NXP Semiconductors

NXP Semiconductors FRDM-MCXN947 Manual de usuario

NXP Semiconductors

NXP Semiconductors OM11058 Manual de usuario

NXP Semiconductors

NXP Semiconductors MCU-SMHMI-HDUG Manual de usuario

NXP Semiconductors

NXP Semiconductors S32G2 Manual de usuario

NXP Semiconductors

NXP Semiconductors NavQPlus 8MPNAVQ-8G-G Manual de usuario

NXP Semiconductors

NXP Semiconductors i.MX 8M Mini EVK Manual de usuario

NXP Semiconductors

NXP Semiconductors AN12398 Manual de usuario

NXP Semiconductors

NXP Semiconductors SABRE i.MX 6 Series Instrucciones de montaje

NXP Semiconductors

NXP Semiconductors LPC288 Series Manual de usuario

NXP Semiconductors

NXP Semiconductors BFU520 Manual de usuario

NXP Semiconductors

NXP Semiconductors LPC5536-EVK Manual de usuario

NXP Semiconductors

NXP Semiconductors freescale MPC837xE-RDS Manual de usuario

NXP Semiconductors

NXP Semiconductors i.MX6ULL Manual de usuario

NXP Semiconductors

NXP Semiconductors UM11768 Manual de usuario

NXP Semiconductors

NXP Semiconductors I2C Bus AN11022 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario