NXP Semiconductors AN12398 Manual de usuario
AN12398
EdgeLock SE05x Quick start guide with Visual Studio project
examples
Rev. 2.5 — 12 September 2022 Application note
534625
Document information
Information Content
Keywords EdgeLock SE05x, EdgeLock SE05x Plug & Trust Middleware, Visual Studio
projects
Abstract This document explains how to get started with EdgeLock SE05x Plug &
Trust middleware using the Visual Studio project examples. It provides
detailed instructions to run the Microsoft Visual Studio projects using the
CMake-based build system included in the EdgeLock SE05x Plug & Trust
middleware.
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
Revision history
Revision
number
Date Description
1.0 2019-06-08 First document release
1.1 2019-06-20 Update of board figures
2.0 2019-11-25 Update of CMake buld system materials
2.1 2019-12-17 Corrected OM-SE05xARD J14 jumper setting
2.2 2020-11-19 Update for EdgeLock SE051
2.3 2020-12-07 Updated to the latest template and fixed broken URLs
2.4 2022-06-02 Add EdgeLock SE050E and EdgeLock A5000 product variants.
Update Table 1, Figure 1, Figure 2, Figure 3, Figure 5, Figure 6, Figure 7, Figure 8,
Figure 9, Figure 10, Figure 11, Figure 12, Figure 13, Figure 14, Figure 15, Figure 16,
Figure 17, Figure 18, Figure 19, Figure 20, Figure 21, Figure 22, Figure 23, Figure 31,
Figure 32, Figure 33, Figure 34, Figure 35, Figure 36, Figure 43, Figure 44 and Figure 45.
Add Section Section 5 Product specific CMake build settings.
Add Section Binding EdgeLock SE05x to a host using Platform SCP Binding EdgeLock
SE05x to a host using Platform SCP.
Update tool versions in Section 7, Section 8 and Section 9.
Moved section "Update FRDM-K64F board with DAPLink firmware" into Section 10.
2.5 2022-07-04 Update to EdgeLock SE Plug & Trust Middleware version 04.02.xx.
Update Section Section 5 Product specific CMake build settings.
Update Section Binding EdgeLock SE05x to a host using Platform SCP Binding EdgeLock
SE05x to a host using Platform SCP.
Revision history
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 2 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
1 How to use this document
The Plug & Trust middleware package is delivered with the CMake files that include
the set of directives and instructions describing the project's source files and targets.
The CMake architecture allows developers to build files for their platform and native
build environment and run exactly the same project example on PC/Windows/Linux and
embedded targets.
This document provides detailed instructions to run Visual Studio examples provided in
the Plug & Trust middleware using FRDM-K64F and OM-SE05xARD boards. The main
body of this document should be used in this sequence:
1. Order board samples. Section 2 contains the ordering details of the boards required in
this document
2. Setup your boards. Section 3 describes how to setup the OM-SE05xARD and FRDM-
K64F boards.
3. Run project examples. Go to Section 4 for instructions to import and run EdgeLock
SE05x Visual Studio project examples.
Supplementary material has been provided in the appendices.
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 3 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
2 Hardware required
The EdgeLock SE05x works as an auxiliary security device attached to a host controller,
communicating with through an I²C interface. To follow the instructions provided in this
document, you need an EdgeLock SE05x development board and a FRDM-K64F MCU
board, acting as a host controller.
EdgeLock SE05x development boards ordering details
The EdgeLock SE05x and EdgeLock A5000 product support packages are providing
development boards for evaluating EdgeLock SE05x and EdgeLock A5000 features.
Select the development board of the product you want to evaluate. Table 1 details the
ordering details of the EdgeLock SE05x and EdgeLock A5000 development boards.
Part number 12NC Description Picture
OM-SE050ARD-E 9354 332 66598 SE050E Arduino®
compatible
development kit
OM-SE050ARD-F 9354 357 63598 SE050 Arduino®
compatible
development kit
OM-SE050ARD 9353 832 82598 SE050F Arduino®
compatible
development kit
OM-SE051ARD 9353 991 87598 SE051 Arduino®
compatible
development kit
OM-A5000ARD 9354 243 19598 A5000 Arduino®
compatible
development kit
Table 1. EdgeLock SE05x development boards.
Note: The pictures in this guide will show SE050E, but all boards in Table 1 can be used
as well with the same hardware configuration.
FRDM-K64F MCU board ordering details
Table 2 details the ordering details for the FRDM-K64F board.
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 4 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
Part number 12NC Content Picture
FRDM-K64F 935326293598 Freedom development
platform for Kinetis
K64, K63 and K24
MCUs
Table 2. FRDM-K64F details
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 5 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
3 Boards setup
This section explains how to prepare the OM-SE05xARD boards and FRDM-K64F board
to run the Plug & Trust middleware project examples. This consists of:
1. OM-SE05xARD jumper configuration.
2. OM-SE05xARD and FRDM-K64F board connection.
Note: If your FRDM-K64F board does not already contain the DAPLink firmware, you
need to update the FRDM-K64F board as described in Section 10.
3.1 OM-SE05xARD jumper configuration
The OM-SE05xARD boards have jumpers that allow you to configure the I2C interface of
EdgeLock SE05x secure elements via the Arduino header. Configure the jumper settings
as shown in Figure 1 to enable this option.
Note: For more information about the jumper settings, refer to AN13539 OM-SE05xARD
hardware overview.
Figure 1. Jumper configuration for FRDM-K64F
3.2 OM-SE05xARD and FRDM-K64F board connection
The OM-SE05xARD boards and FRDM-K64F board can be directly connected using the
Arduino connectors. The OM-SE05xARD boards come with male connectors while the
FRDM-K64F board comes with female headers.
Mount any OM-SE05xARD board on top of the FRDM-K64F as shown in Figure 2:
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 6 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
Figure 2. Arduino connectors of OM-SE05xARD and FRDM-K64F boards
Double check that the two boards are connected as shown in Figure 3:
Figure 3. OM-SE05xARD mounted in FRDM-K64F board
Note: Refer to Figure 1 for OM-SE05xARD jumper configuration.
3.3 Flash FRDM-K64F with VCOM software
The VCOM software allows the FRDM-K64F board to be used as a bridge between the
Windows machine and the EdgeLock SE05x and enables the execution of the EdgeLock
SE05x ssscli tool and other utilities from the laptop. To flash the VCOM software into
the FRDM-K64F, follow these steps:
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 7 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
1. Unplug and plug again the USB cable to the openSDA USB port as shown in Figure 4:
Figure 4. Unplug and plug OpenSDA port
2. When you plug the board, your laptop should recognize the board as an external drive
as shown in Figure 5:
Figure 5. FRDM-K64F drive
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 8 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
3. Flash the VCOM software to FRDM-K64F. The VCOM software binary can be found
in the Plug & Trust middleware package, inside the simw-top\binaries folder as
shown in Figure 6:
Figure 6. VCOM binary folder
4. Drag and drop or copy and paste the a7x_vcom-T1oI2C-frdmk64f-SE050x.bin
file into the FRDM-K64F drive from your computer file explorer as shown in Figure 7:
Figure 7. Drag and drop VCOM binary
5. The serial and VCOM ports should be recognized by your Device Manager. To check
that the ports are recognized, follow the steps indicated in Figure 8:
a. Unplug the USB cable from the OpenSDA USB port.
b. Plug the USB cable to the OpenSDA USB port.
c. Check that the serial port is recognized in the category Ports (COM & LTP). In
this document, it is recognized as USB Serial Device (COM7) but this naming
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 9 / 48
NXP Semiconductors AN12398
EdgeLock SE05x Quick start guide with Visual Studio project examples
might change depending on your computer. Therefore, it is important that you
identify which device is recognized at the moment you plug the SDA USB port to
the computer.
d. Plug the USB cable to the K64F USB port.
e. Check that the VCOM port is recognized in the category Ports (COM & LTP).
In this document, it is recognized as Virtual Com Port (COM8) but this naming
might change depending on your computer (e.g. It could also appear named as
USB Serial Device). Therefore, it is important that you identify which device is
recognized at the moment you plug the K64F USB port to the computer.
Figure 8. Check VCOM and serial ports
AN12398 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 2.5 — 12 September 2022
534625 10 / 48
Tabla de contenidos
Otros manuales de Hardware de computadora de NXP Semiconductors
NXP Semiconductors
NXP Semiconductors QorIQ T2080 Manual de usuario
NXP Semiconductors
NXP Semiconductors BFU520 Manual de usuario
NXP Semiconductors
NXP Semiconductors OM15080-K32W Manual de usuario
NXP Semiconductors
NXP Semiconductors JN5148 Manual de usuario
NXP Semiconductors
NXP Semiconductors QorIQ LS1046A Manual de usuario
NXP Semiconductors
NXP Semiconductors FRDM-MCXA153 Manual de usuario
NXP Semiconductors
NXP Semiconductors MCU-Link Pro Manual de usuario
NXP Semiconductors
NXP Semiconductors MCX-N5 EVK Series Manual de usuario
NXP Semiconductors
NXP Semiconductors TWR-K60F120M Manual de usuario
NXP Semiconductors
NXP Semiconductors PN7150 Manual de usuario
NXP Semiconductors
NXP Semiconductors UM10694 Manual de usuario
NXP Semiconductors
NXP Semiconductors PCA9600 OM6293 Manual de usuario
NXP Semiconductors
NXP Semiconductors Android Manual de usuario
NXP Semiconductors
NXP Semiconductors SLN-VIZNLC-IOT Manual de usuario
NXP Semiconductors
NXP Semiconductors I2C Bus AN11022 Manual de usuario
NXP Semiconductors
NXP Semiconductors OM13506 Manual de usuario
NXP Semiconductors
NXP Semiconductors QorIQ LS1028A Manual de usuario
NXP Semiconductors
NXP Semiconductors OM15080-JN5189 Manual de usuario
NXP Semiconductors
NXP Semiconductors OM13489 Manual de usuario
NXP Semiconductors
NXP Semiconductors MSC8113 Manual de usuario
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
