NOVA3D Bene3 Manual de usuario
1
Bene3
User Manual
2
3
Introduction
Please read this manual carefully before use. It is highly recommended reading
everything from beginning to end unless anything negligible is explicitly stated.
For more information, please visit: http://www.nova3dprinter.com.
In order to ensure the quality and efficiency of after-sales services, it is important to
follow the following steps in case of any problems:
1) Please Read this manual in detail, most of the questions can be found answers in
this manual.
2) Any questions can be sent to email:
service@nova3dp.com
3) You can get the guidance video at http://www.nova3dprinter.com.
4
Introduction ................................................................................. Error! Bookmark not defined.
1. Know the machine................................................................. Error! Bookmark not defined.
1.1 Package contents............................................................. Error! Bookmark not defined.
1.2 Machine structure............................................................ Error! Bookmark not defined.
1.3 Technical parameters....................................................... Error! Bookmark not defined.
1.4 Introduction of the touch screen....................................... Error! Bookmark not defined.
2. Machine checking .................................................................... Error! Bookmark not defined.
3. Quick print............................................................................................................................. 13
3.1 Platform leveling checking ............................................................................................ 13
3.2 Print preparation.............................................................. Error! Bookmark not defined.
3.3 Test print ......................................................................... Error! Bookmark not defined.
4. Post-print processing................................................................ Error! Bookmark not defined.
4.1 Remove the printed model.............................................................................................15
4.2 Resin tank cleaning ......................................................... Error! Bookmark not defined.
4.3 Next printing preparation................................................. Error! Bookmark not defined.
5. Customize printing................................................................... Error! Bookmark not defined.
5.1 NovaMaker software installation................................................................................... 16
5.2 NovaMaker software introduction ................................... Error! Bookmark not defined.
5.3 NovaMaker import models .............................................. Error! Bookmark not defined.
5
5.4 NovaMaker adding support ............................................. Error! Bookmark not defined.
5.5 NovaMaker slicing .......................................................... Error! Bookmark not defined.
5.6 Connection to the printer ................................................. Error! Bookmark not defined.
5.7 Printing ........................................................................... Error! Bookmark not defined.
6. Routine maintenance and FAQ................................................. Error! Bookmark not defined.
6.1 The printing platform..................................................................................................... 30
6.2 The trough....................................................................... Error! Bookmark not defined.
6.3 The display screen........................................................... Error! Bookmark not defined.
6.4 The release liner ............................................................................................................31
6
1. Know the Machine
1.1Package list
7
1.2Machine structure
Platform fixed knob
Z-axis rod
Printing arm
Leveling screw
Working panel
Resin tank
Printing screen
Printing panel
Touch
screen
Touch switch button
8
1.3Technical parameters
Model
NOVA3D-L3130
Curing rate
15mm/h
X Y Exactitude
0.05mm
Z-axis Exactitude
0.01mm
Dimensions
210mm*210mm*386mm
Build volume
130mm*70mm*150mm
Forming technology
Surface forming technology of LCD
stereolithography
Net weight
8KG
Control software
NovaMaker （NOVA3D.CN）
9
1.4Introduction of the touch screen
There are four buttons when powering the printer on, which can access to the four
pages: the printing, the system setting, the files, and the print settings.
The main page, as shown the Figure1.
The printing page: As shown the figure1, it records and shows the printing
information: the printing file thickness, layers, panel raising speed, printing status, the
File format
STL CWS 3MF
Printed material
The photosensitive resin (405nm)
Connectivity
Wired Ethernet, wireless WIFI, Mobile APP
Resolution
2K(1440*2560)
Screen
3.5 -inch capacitive touch screen
Power
60W
Package
Pearl cotton lining + special cardboard box
Storage
8G
10
ongoing printing image, and speeds etc.
System settings: As shown the Figures 3 and 4. There are two pages, one is the
network setting, which you can connect to the current LAN network so that the
machine can be connected wirelessly. The other is machine information which
indicates the machine information, such as module, serial number, and version
information.
The file page: As shown the figure5. It storage the whole files in the machine,
you can print, delete files here. It is the same page when using a U-disk.
The print setting: As shown the Figure6 &7. Two settings on this page, the panel
setting, and the SLC parameter setting.
The power off page: As shown the figure8. Press and hold the switch button for 3
seconds, then there will be a power off confirm page, at that time, press and hold the
switch for another 10 seconds will shut off the machine.
Figure1 Figure2
Figure3 Figure4
Tabla de contenidos
Otros manuales de Impresora 3D de NOVA3D
